Best Lift Kit For Rav4: compare fitment and lift height

#1 · Best Overall

1. maXpeedingrods 2/1.5-inch Kit

• Weight: 11.35 lb

Best for: 2006–2018 RAV4 leveling.

Why it ranks #1: Its stated fitment covers RAV4 models from 2006 through 2018, with a 2-inch front and 1.5-inch rear lift and bolt-on installation.

A 2-inch front lift paired with a 1.5-inch rear lift gives this maXpeedingrods kit a specific leveling profile for 2006–2018 Toyota RAV4s. The added ground clearance can make room for larger tires, while the front-to-rear height difference addresses stance as well as clearance. It uses bolt-on mounting and requires no special tools.

The kit’s precision-machined front spacers lift the suspension, and its 2-inch front and 1.5-inch rear measurements give buyers a defined, staggered lift rather than a uniform rise. That increased ground clearance can accommodate larger tires for the stated driving needs. Bolt-on mounting and the unique design are intended to simplify installation without special tools; the listed estimated installation time is 2–4 hours. Its stated application is limited to Toyota RAV4 model years 2006–2018.

Skip it if you own a 2019–2025 RAV4; the maXpeedingrods XK94YU kit covers that newer model range, subject to its listed exclusions.

This kit suits owners of a 2006–2018 RAV4 seeking a front-biased lift, added clearance, and room for larger tires. Its stated vehicle range and 2–4-hour installation estimate are important fit and planning boundaries.

Listed on Amazon as: maXpeedingrods 2” Front & 1.5” Rear Lift Kit for Toyota RAV4 2006-2018

#2 · Best Older-Generation Fit

2. ReadyLIFT 69-53200 SST Kit

• Weight: 13 lb
• Material: Alloy Steel, Aluminum
• Material Type: Alloy Steel, Aluminum

Best for: 2006–2018 trail clearance.

Why it ranks #2: It fits 2006–2018 RAV4 models, offers a 2-inch front and 1-inch rear lift, and specifies tire use up to 245/65R17.

ReadyLIFT pairs a 2-inch front lift with a 1-inch rear lift for 2006–2018 AWD and FWD RAV4 models, including Adventure. Its offset spacer design is described as retaining factory camber and caster for alignment, while the lift adds clearance for trail use and specified larger tires.

The alloy-steel and aluminum construction provides the kit’s stated material combination, while the 2-inch front and 1-inch rear lift establish its staggered stance. ReadyLIFT says its offset spacer design retains factory camber and caster for ideal alignment, a useful consideration after raising the vehicle. The kit allows use of up to a 245/65-17 tire on a 17×8 wheel with +38 offset. It is listed for both AWD and FWD RAV4 models from 2006 through 2018.

Skip it if you own a 2019–2023 RAV4; the ReadyLIFT 69-59200 is listed for that generation and includes end links.

This is a strong match for 2006–2018 RAV4 owners seeking trail clearance and a defined tire setup. Keep its stated 245/65-17 tire, 17×8 wheel, and +38 offset allowance in view when planning wheels.

Listed on Amazon as: ReadyLIFT 69-53200 2.0'' SST Lift Kit For Toyota Rav4 AWD/FWD

#3 · Most Complete Hardware

3. Tema4x4 40mm Front-Rear Kit

• Weight: 8.8 lb
• Material: Polyurethane
• Material Type: Polyurethane

Best for: 2006–2018 complete spacer kit.

Why it ranks #3: Its stated 2006–2018 fitment includes front strut and rear coil spacers, shock extenders, sway-bar extensions, and brake-line extensions.

A 40mm lift with front strut spacers, rear coil spacers, shock extenders, sway-bar extensions, and brake-line extensions gives this Tema4x4 kit an extensive component list. It is listed for third- and fourth-generation RAV4s, adding clearance that can accommodate larger custom rims and tires.

The front strut spacers and rear coil spacers provide the listed lift elements, while rear shock extenders, sway-bar extensions, and brake-line extensions are also included. That broader set of components is relevant to buyers comparing what comes with a front-and-rear lift rather than spacers alone. The 40mm rise is intended to improve appearance, increase ground clearance, and allow larger custom rims and tires. Compatibility is listed for XA30 and XA40 RAV4 generations, with dates varying across the product details.

Skip it if you have a 2019–2023 RAV4; the ReadyLIFT 69-59200 is listed for that newer range and includes end links.

This Tema4x4 kit suits owners of a third- or fourth-generation RAV4 seeking a 40mm lift with multiple included extensions. Its product details give different date ranges, so verify the relevant generation and application.

Listed on Amazon as: Complete Front and Rear Lift Kit 40mm compatible with RAV4 2006-2018

#4 · Best Safety-System Detail

4. ReadyLIFT 69-59200 SST End-Link Kit

• Weight: 18 lb
• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: 2019–2023 safety-tech fit.

Why it ranks #4: For newer RAV4s, it specifies a 2-inch lift, bolt-on installation, and testing and approval for Toyota Safety Sense technologies.

ReadyLIFT’s stated approval for Toyota Safety Sense technologies sets this 2-inch SST kit apart for 2019–2023 AWD and FWD RAV4 owners. Its offset-designed steel top-mount strut extensions aim to maintain factory alignment geometry, while bolt-on installation avoids permanent modifications and increases ground clearance for a 245-series tire.

The fabricated heavy-duty steel plate top-mount extensions use an offset design that ReadyLIFT says maintains factory alignment geometry. That detail matters to owners evaluating alignment after a lift. The kit is described as bolt-on, with no permanent modifications, and tested and approved to work with Toyota Safety Sense technologies. Its 2-inch lift adds ground clearance when using a 245-series tire. The stated vehicle range is 2019–2023 Toyota RAV4 AWD and FWD models.

Skip it if you own a 2006–2018 RAV4; the ReadyLIFT 69-53200 is listed for that earlier range and supports a specified 245/65-17 tire.

This is a fit for 2019–2023 RAV4 owners prioritizing a 2-inch lift, bolt-on installation, and stated Toyota Safety Sense compatibility. Its 245-series tire guidance and model-year range define key setup boundaries.

Listed on Amazon as: ReadyLIFT 69-59200 2.0'' SST Lift Kit w/End Links For Toyota Rav4 AWD/FWD

#5 · Tallest Listed Lift

5. Rough Country 2.5-inch Kit

Best for: 2019–2021 front leveling.

Why it ranks #5: Its 2.5-inch kit fits 2019–2021 2WD and 4WD models and lists front and rear suspension components for leveling.

A component-rich 2.5-inch lift is the defining feature of Rough Country’s kit for 2019–2021 RAV4 models with two- or four-wheel drive. Its front-to-rear leveling aims to reduce the factory nose-down look and allow larger tires, while the maker says it maintains factory ride quality.

The included front strut spacers, sway bar brackets, rear shock extensions, rear spring spacers, trailing arm spacers, and subframe components support a lift that addresses multiple suspension points. Rough Country describes the result as improved ground clearance and front-to-rear leveling, with room to run larger tires. The manufacturer also says factory ride quality is maintained and installation is suitable for home, while its safety information recommends a certified technician familiar with suspension procedures and post-install checks.

Skip it if you have a 2019–2023 RAV4 and prioritize Toyota Safety Sense compatibility; the ReadyLIFT 69-59200 lists that feature.

Choose this for a 2019–2021 two- or four-wheel-drive RAV4 if front-to-rear leveling and larger-tire clearance are priorities. The installation guidance favors qualified suspension knowledge and post-install checks, so plan accordingly.

Listed on Amazon as: Rough Country 2.5" Lift Kit for 2019-2021 Toyota RAV4 2WD/4WD – 73100

#6

6. maXpeedingrods 2.5/1.5-inch Kit

• Weight: 13000 g
• Material: Billet 6061 Aluminum and Steel
• Material Type: Billet 6061 Aluminum and Steel

Best for: 2019–2025 non-TRD leveling.

Why it ranks #6: It offers a 2.5-inch front and 1.5-inch rear lift for specified newer 2WD and 4WD models, but excludes several trims and configurations.

A 2.5-inch front and 1.5-inch rear lift gives this maXpeedingrods kit a pronounced leveling profile for eligible 2019–2025 RAV4 2WD and 4WD models. The added clearance is intended to make room for larger tires, but the listing explicitly excludes several trims and drivetrain configurations.

The kit combines a 2.5-inch front lift with a 1.5-inch rear lift to correct factory rake and create a level, rugged stance. Its stated ground-clearance increase can provide extra room for larger tires and support off-road performance. Billet 6061 aluminum and steel are the listed materials, and included components comprise strut spacers, brackets, and installation hardware. Fitment is limited: TRD, Adventure, Limited, and plug-in hybrid models are excluded, as are factory-lifted models and Torque Vectoring AWD.

Skip it if you own a TRD, Adventure, Limited, plug-in hybrid, factory-lifted, or Torque Vectoring AWD RAV4; those configurations are excluded.

This kit suits eligible 2019–2025 RAV4 owners seeking a front-biased lift, a leveled stance, and clearance for larger tires. Its extensive trim and drivetrain exclusions make configuration the decisive fit consideration.

Listed on Amazon as: maXpeedingrods 2.5” Front & 1.5” Rear Lift Leveling Kit for Toyota RAV4 2019-2025 2WD/4WD

#7

7. Motortane XA50 2-inch Kit

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: XA50 polyurethane lift.

Why it ranks #7: It covers the XA50 generation and lists 2-inch front and rear lift, polyurethane spacers, replacement studs, and standard-tool installation.

A 2-inch lift at both ends gives the Motortane kit a level, raised profile for the Toyota RAV4 XA50, listed for 2018–2025. Its polyurethane spacers and replacement studs support the front-and-rear setup, while the maker says installation uses standard tools without modifying the original suspension structure.

The kit contains two front and two rear polyurethane spacers plus replacement studs, matching its stated 2-inch front-and-rear lift. The added clearance is intended to aid obstacle navigation and off-road use, and the manufacturer says the setup helps maintain factory-like ride characteristics. Installation uses standard tools and does not require modifications to the original suspension structure, according to the description. Its stated XA50 application spans 2018–2025, so buyers should consider that model designation when matching the kit.

Skip it if you have a 2019–2023 RAV4 and need a listed Toyota Safety Sense approval; ReadyLIFT 69-59200 specifically states that compatibility.

This Motortane kit fits buyers seeking a level 2-inch lift on a listed XA50 RAV4 and value standard-tool installation without structural suspension modifications. Its model designation and stated 2018–2025 range define the application boundary.

Listed on Amazon as: Lift Kit for TOYOTA RAV4 XA50 2018-2025 2" 50mm Front & Rear

#8

8. DEALPAREX 40mm Kit

Best for: 2018-present polyurethane lift.

Why it ranks #8: This 40mm polyurethane kit is specified for RAV4 models from 2018 onward and includes strut spacers, coil spacers, and fitting hardware.

A 1.6-inch lift made with high-density polyurethane distinguishes this DEALPAREX kit for RAV4 models from 2018 onward. Its two strut spacers and two coil spacers increase ground clearance and support custom rims and tires, giving buyers a measured lift option with a specific later-model application.

The included strut spacers, coil spacers, and fitting kit provide the listed components for the lift, while the 1.6-inch height is intended to increase clearance and improve vehicle appearance. DEALPAREX identifies the material as high-density polyurethane made in France and states that it supports a long product life. The application is specified for RAV4 2018-present, with additional vehicle codes AXAA54, MXAA52, and MXAA54. The stated clearance can help accommodate custom rims and tires.

Skip it if you drive a 2006–2018 RAV4; the maXpeedingrods KJ236 is listed for that earlier model range.

Consider this kit if your RAV4 is within the stated 2018-present application and you want a polyurethane 1.6-inch lift for clearance and custom wheels. The listed vehicle codes offer an additional fitment reference.

Listed on Amazon as: Leveling Lift Kit 1.6 inch 40mm compatible with Toyota – Fits RAV4 2018-present

#9

9. Tema4x4 40mm Complete Kit

• Weight: 8.8 lb

Best for: 2000–2005 rough-road clearance.

Why it ranks #9: It serves a narrower RAV4 generation, with a 40mm lift and both coil and strut spacers listed among the included components.

A 40mm lift for 2000–2005 Toyota RAV4 models makes this Tema4x4 kit a generation-specific choice for added clearance. Its coil and strut spacers are intended to help with snow, dirt, country roads, and higher curbs, while the increased space can accommodate larger custom rims and tires.

Tema4x4 supplies coil spacers and strut spacers for its 40mm lift, linking the added height to easier travel over snow, dirt, and country roads. The product also describes the extra clearance as useful for parking near higher curbs and for fitting larger custom rims and tires. At 8.8 pounds, the listed kit includes the two spacer types. Its application is the 2000–2005 RAV4, so the generation is the key fitment consideration.

Skip it if you drive a 2006–2018 RAV4; the Tema4x4 TOY-RAV4-GEN34-2/40 is listed for that newer range.

This kit suits 2000–2005 RAV4 owners who want 40mm of additional clearance for rough roads, higher curbs, or larger custom wheels. Its generation-specific application is the boundary to prioritize before choosing.

Listed on Amazon as: Complete Lift Kit 40mm for Toyota RAV4 2000-2005

#10

10. DEALPARTS 40mm Full Kit

• Weight: 5.1 lb
• Material: Polyurethane
• Material Type: Polyurethane

Best for: 1994–2000 RAV4 clearance.

Why it ranks #10: Its 40mm polyurethane kit fits only the specified 1994–2000 RAV4 range, making it substantially narrower in application than the other options.

This DEALPARTS kit targets the first-generation-era 1994–2000 RAV4, an unusually specific fitment compared with newer-model lift options. Its 1.6-inch polyurethane lift combines strut and coil spacers to increase ground clearance and support custom rims and tires, with a fitting kit included.

The 1.6-inch lift uses polyurethane strut and coil spacers, which the product description links to improved appearance and increased ground clearance. That clearance is intended to make room for custom rims and tires, while the included fitting kit supplies installation hardware. DEALPARTS identifies the material as high-density polyurethane made in France and lists RAV4 codes SXA10, SXA11, SXA15, and SXA16, with a stated application of April 1994 through August 2000.

Skip it if you own a 2000–2005 RAV4; the Tema4x4 TOY-RAV4-GEN2-1/40 is listed for that later range.

This kit is for owners of a RAV4 within its April 1994–August 2000 application who want added clearance and space for custom wheels. Its narrow model range makes generation matching central to the choice.

Listed on Amazon as: Leveling Lift Kit 1.6 inch 40mm for Toyota – Full Kit