Best Lift Kit For Subaru Outback: Compare 10 Options

#1 · Best Overall

1. ReadyLIFT 69-90200

• Weight: 20 lb
• Material: Alloy Steel, Aluminum, or High Carbon Steel
• Material Type: Alloy Steel, Aluminum, or High Carbon Steel

Best for: 2020–2023 Outback AWD fit.

Why it ranks #1: Specifically fits 2020–2023 Outback models, lifts the front 2 inches and rear 1.5 inches, and uses an offset spacer design for caster and camber.

An offset spacer design for correct caster and camber is the defining detail of ReadyLIFT’s 2-inch SST kit for 2020–2023 Subaru Outback AWD. Its easy bolt-on installation and front sway bar end links make it a generation-specific option for owners seeking added clearance without overlooking suspension geometry.

The kit provides 2 inches of front lift and 1.5 inches at the rear, increasing ride height while keeping a half-inch difference between ends. ReadyLIFT’s offset spacer design is specified for correct caster and camber, addressing alignment geometry as part of the lift rather than leaving that benefit implied. The listing also describes installation as easy bolt-on and includes front sway bar end links. Its stated application is the 2020–2023 Outback.

Skip it if you drive a 2015–2019 Outback; the ReadyLIFT 69-95200 lists that earlier model range.

Choose this for a 2020–2023 Outback AWD if bolt-on installation and the stated caster-and-camber spacer design matter. The listed lift is uneven, with 2 inches at the front and 1.5 at the rear.

Listed on Amazon as: ReadyLIFT 69-90200 2.0'' SST Lift Kit For Subaru Outback AWD

#2 · End-Link Upgrade

2. ReadyLIFT 69-95200

• Material: Alloy Steel, Aluminum
• Material Type: Alloy Steel, Aluminum

Best for: 2015–2019 Outback tire upgrade.

Why it ranks #2: Fits 2015–2019 Outback AWD, provides a 2-inch front and 1.5-inch rear lift, and includes upgraded sway bar end links.

Upgraded sway bar end links distinguish ReadyLIFT’s 2.0-inch SST kit, replacing the original sway-bar mount approach to eliminate its relocation-bracket flex and compliance. That feature accompanies a front-and-rear lift for 2015–2019 Outback AWD owners seeking more ground clearance and room for a specified larger tire-and-wheel combination.

The kit raises the front 2 inches and rear 1.5 inches, adding clearance while retaining a front-to-rear lift difference. ReadyLIFT specifies capacity for up to a 245/65-17 tire on a 17×8 wheel with +38 offset, giving buyers a concrete wheel-and-tire target. Upgraded sway bar end links address flex and compliance associated with the original OE sway-bar mount system, rather than relying on a relocation bracket. The stated fitment is 2015–2019 Outback AWD.

Skip it if you own a 2020–2023 Outback; the ReadyLIFT 69-90200 lists that newer generation instead.

This suits 2015–2019 Outback AWD owners seeking added clearance, a specified larger tire option, and upgraded sway-bar links. Its 2-inch front and 1.5-inch rear lift is not a level front-to-rear increase.

Listed on Amazon as: ReadyLIFT 69-95200 2.0'' SST Lift Kit w/End Links For Subaru Outback AWD

#3 · Steel Spacers

3. Tuff Country 51730

• Weight: 19 lb
• Material: Steel
• Material Type: Steel

Best for: Steel spacer lift option.

Why it ranks #3: The listing identifies a 2-inch lift kit for 2015–2022 Outback and specifies steel strut spacers, making it a useful fit for that generation.

Steel strut spacers are the core of Tuff Country’s 2-inch Outback lift kit, offering a straightforward spacer-based route to increased ride height. The listing identifies compatibility with 2015–2022 Outback and describes the kit as a 2-inch lift, making the stated lift amount and spacer construction the key buyer considerations.

Tuff Country identifies the 51730 as a 2-inch lift kit for the Outback and lists steel as its material. The included components are strut spacers, so the stated approach raises the vehicle through spacers rather than a listed replacement suspension system. Its fitment language gives a 2015–2022 range in the title, while the additional description calls it a 15–23 Outback kit; buyers should account for that inconsistency when evaluating application.

Skip it if you need an explicitly stated front-and-rear lift split; the ReadyLIFT 69-95200 lists separate front and rear heights.

This may suit Outback owners prioritizing a 2-inch steel strut-spacer kit. Because the title and description give different year ranges, the fitment wording is a material boundary to resolve before choosing it.

Listed on Amazon as: Tuff Country 51730 2" Lift Kit Compatible with/Replacement for Subaru Outback 2015-2022

#4 · Lower Lift

4. Motortane Outback V

• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: Modest Outback V lift.

Why it ranks #4: Fits Outback V models from 2014–2021 and supplies a 1.2-inch front and rear lift with polyurethane spacers and bolt extensions.

A 1.2-inch lift at both ends makes this Motortane kit a modest-height option for Subaru Outback V models listed from 2014–2021. Polyurethane spacers and included bolt extensions accompany an easy-mounting claim, offering a defined front-and-rear spacer package rather than a larger lift amount.

The matched 1.2-inch front and rear lift increases ground clearance, which the listing connects to obstacle navigation and off-road use. Polyurethane is the specified spacer material, and the included components include two front and two rear spacers plus EASY ON bolt extensions. Motortane describes installation as easy and says detailed instructions are provided. Its title identifies Outback V 2014–2021 fitment, so buyers should treat that stated generation and range as the application boundary.

Skip it if you want a 3-inch lift for a 2000–2004 Outback; the WeiSen 70DA401037 lists that height and range.

This suits Outback V owners seeking a 1.2-inch equal lift with polyurethane spacers and included bolt extensions. Its stated application is 2014–2021 Outback V, and the lift remains modest at both ends.

Listed on Amazon as: Lift Kit for SUBARU OUTBACK V 2014-2021 1.2" 30mm Front & Rear Easy Mounting

#5 · Broad-Year Fit

5. DEALPAREX 2009–2021 Kit

• Weight: 3.3 lb
• Material: Polyurethane (PU)
• Material Type: Polyurethane (PU)

Best for: 2009–2021 Outback leveling.

Why it ranks #5: Lists Outback fitment from 2009–2021 and includes front and rear polyurethane strut spacers plus a fitting kit for its 1.2-inch lift.

A polyurethane 30mm leveling kit covers Subaru Outback models listed from 2009–2021, with matching front and rear strut spacers. DEALPAREX connects the lift to increased ground clearance and room for custom rims and tires, making this a modest-height option for a broad stated year range.

The 1.2-inch or 30mm lift uses coil spacers to raise the Outback and increase ground clearance, while the listing says the added height allows custom rims and tires. High-density polyurethane is identified as the material, and the kit includes two front spacers, two rear spacers, and a fitting kit. The compatibility list also includes Subaru BRZ 2011-present and Legacy 2009–2021; the Outback range is 2009–2021.

Skip it if you seek a 3-inch lift for a 2005–2009 Outback; the Wsays 793565283390 lists up to that height and range.

This suits 2009–2021 Outback owners looking for a modest 30mm lift, added clearance, and a fitting kit. Its listed height is 1.2 inches, not a multi-inch lift.

Listed on Amazon as: Leveling Lift Kit 1.2 inch 30mm compatible with Subaru – Fits BRZ 2011-present, Legacy 2009-2021, Outback 2009-2021

#6

6. maXpeedingrods 2005–2009 Kit

• Weight: 3060 g

Best for: 2005–2009 Outback comfort.

Why it ranks #6: Fits all listed 2005–2009 Legacy Outback models and offers a 2-inch front and rear lift with strut spacers and installation hardware.

Top-mounted strut spacers preserve the factory ride quality and comfort while adding a stated 2 inches of lift at both ends. For 2005–2009 Subaru Legacy Outback owners, the bolt-on approach is intended to raise the vehicle and allow larger tires without requiring shock disassembly.

The 2-inch front and rear lift increases ground clearance and provides room for larger tires, while the top-mounted spacer setup is described as maintaining smooth factory ride quality and comfort. The strut extension spacers are precisely machined for a direct fit and bolt onto the tops of the shocks, with no disassembly required. Installation hardware is included alongside the spacers. The stated application covers all 2005–2009 Subaru Legacy Outback models.

Skip it if you need a stated tire-size limit for planning; the ReadyLIFT 69-95200 specifies a compatible tire-and-wheel combination.

This fits buyers with a 2005–2009 Legacy Outback who want equal front-and-rear lift and a no-disassembly spacer installation. The listing says larger tires can fit but does not provide a maximum tire size.

Listed on Amazon as: maXpeedingrods 2" Lift Kit for Subaru Legacy Outback 2005-2009

#7

7. Wsays 2005–2009 Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: 2005–2009 Outback 3-inch lift.

Why it ranks #7: Fits Outback models from 2005–2009 and lists a 3-inch front and rear lift using CNC billet 6061 aluminum spacers; an additional bracket may be required.

CNC billet 6061 aluminum construction distinguishes Wsays’ 3-inch front-and-rear spacer lift for 2005–2009 Outback and Legacy models. The listed lift comes with an important installation condition: a lower control arm bracket is additionally required, so buyers should plan around that component.

Wsays lists up to 3 inches of lift at the front and rear and explains that lift height does not equal spacer thickness because compound ratios are used. CNC billet 6061 aluminum is the stated construction. Installation is described as bolt-on between the top strut hats, but the listing also requires an additional lower control arm bracket and notes that other components may be needed depending on the vehicle. Fitment is Outback and Legacy 2005–2009.

Skip it if you do not want to source an extra bracket; the maXpeedingrods NT89IL lists 2005–2009 Legacy Outback fitment without that stated requirement.

This suits 2005–2009 Outback owners seeking up to 3 inches of lift in an aluminum spacer kit. Factor in the required lower control arm bracket and possible vehicle-dependent additional components.

Listed on Amazon as: Wsays 3" Shock Lift Suspension Extension Spacers For Outback Legacy

#8

8. WeiSen 2000–2004 Kit

• Weight: 8 lb

Best for: 6061 aluminum 3-inch lift.

Why it ranks #8: Fits all listed 2000–2004 Outback models and provides a 3-inch front and rear lift with 6061 aluminum spacers.

6061 aluminum spacers provide the defining material choice in WeiSen’s 3-inch front-and-rear lift kit for older Outback models. The stated lift adds ground clearance and room for larger tires, while the material is described as lightweight, strong, and resistant to deformation.

The 3-inch lift at both ends raises the vehicle and is intended to create more room for larger tires, with the listing also citing improved off-road performance. Its 6061 aluminum construction is described as lightweight and resistant to deformation, and a special silver treatment is said to improve corrosion resistance. The package list specifies two front and two rear strut spacers. Fitment covers Outback and Legacy 2000–2004 and Baja 2003–2006.

Skip it if you have a 2005–2009 Outback; the Wsays 3-inch spacer kit lists that later generation.

This suits 2000–2004 Outback owners seeking a 3-inch lift, larger-tire room, and aluminum spacers with a corrosion-resistant treatment. Its stated fitment excludes later Outback model years.

Listed on Amazon as: WeiSen 3" Lift Kit Front & Rear Full Suspension Leveling Lift Kit Compatible with Subaru Outback/Legacy 2000-2004 Fit Subaru Baja 2003-2006 Billet 6061 Aluminum

#9

9. maXpeedingrods 2000–2004 Kit

• Weight: 7.94 lb

Best for: 2000–2004 Outback 3-inch lift.

Why it ranks #9: Covers Outback models from 2000–2004 and offers a 3-inch front and rear lift with billet aluminum spacers while also listing Legacy and Baja fitment.

A 3-inch lift at both ends gives this maXpeedingrods kit its defining advantage for 2000–2004 Outback and Legacy owners seeking substantial added clearance. Its billet aluminum spacers are also described as maintaining original ride quality, pairing the higher lift with a stated comfort-preserving purpose.

The equal 3-inch front and rear lift increases ride height and is intended to make room for larger tires and wheels. Billet aluminum spacers provide the listed construction, while the product description says the setup maintains original ride quality, comfort, and handling. The stated fitment covers Subaru Outback and Legacy models from 2000–2004, plus Subaru Baja models from 2003–2006, so its application is limited to those listed vehicle ranges.

Skip it if you own a 2005–2009 Outback; the maXpeedingrods NT89IL is listed for that later range.

This is for owners of a 2000–2004 Outback or Legacy seeking a 3-inch equal lift and larger-tire clearance. Its listed application does not extend to later Outback generations.

Listed on Amazon as: maXpeedingrods 3" Front & Rear Lift Kit for Subaru Outback/Legacy 2000-2004

#10

10. DEALPARTS 1995–1998 Kit

• Weight: 3.4 lb
• Material: Polyurethane
• Material Type: Polyurethane

Best for: Early-generation 30mm leveling.

Why it ranks #10: Lists Outback fitment only from 1995–1998, a narrower and older application than the other options, with a 1.2-inch polyurethane spacer lift.

A full set of polyurethane coil spacers provides 30mm, or 1.2 inches, of lift for listed early Outback applications. DEALPAREX includes front and rear strut spacers plus a fitting kit, offering a compact leveling option for owners of Outback models from 1995–1998.

The 1.2-inch spacers increase ground clearance and are described as enabling custom rims and tires, linking the modest lift to both clearance and wheel choices. Polyurethane is the specified material, and the package includes two front spacers, two rear spacers, and a fitting kit. The listed Outback application is 1995–1998; the broader compatibility list also names Forester, Impreza, Legacy, and Legacy Lancaster ranges, so vehicle-specific range matters.

Skip it if you own a 2009–2021 Outback; the DEALPAREX 80-15-001 + 80-15-009/30 lists that range.

This fits owners of a 1995–1998 Outback seeking a 30mm lift, added clearance, and a fitting kit. Its Outback year range is much narrower than its separate Forester and Legacy applications.

Listed on Amazon as: DEALPAREX Leveling Lift Kit 1.2 inch 30mm for Subaru – Full Kit