Best Xj Lift Kit for Jeep Cherokee XJ Builds

#1 · Best Overall

1. Rough Country 62340

• Material Type: Alloy Steel, Aluminum, Rubber, Zinc
• Weight: 117.2 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Four-and-a-half-inch M1 setup.

Why it ranks #1: Its listed 4.5-inch lift fits 2WD/4WD XJs and includes M1 monotube shocks, rear leaf springs, adjustable control arms, brake lines, and a transfer case skid plate.

Four M1 monotube shocks headline this Rough Country 4.5-inch kit, pairing a named shock type with the lift height for owners seeking a broader suspension package. Adjustable upper and lower control arms, lifted leaf springs, and high-flex front coils are also listed among its components.

The kit is specified for 1984–2001 Jeep Cherokee XJ models with 2WD or 4WD. M1 monotube shocks are included alongside adjustable upper and lower control arms, giving buyers both shock and control-arm upgrades in the package. Rear lifted leaf springs and high-flex front coils address the front and rear suspension, while a transfer-case skid plate, stainless-steel brake lines, and sway-bar disconnects add further listed components. Rough Country describes the ride as factory-like and recommends knowledgeable installation and checks.

Skip it if you need a stated NP231-only application with full leaf springs and M1 shocks; Rough Country's 68640 lists that combination.

This suits 1984–2001 XJ owners seeking a 4.5-inch lift with M1 shocks, adjustable control arms, and supporting suspension parts. Its stated range includes 2WD and 4WD; plan for knowledgeable installation and checks.

Listed on Amazon as: Rough Country 4.5" Lift Kit for 1984-2001 Jeep Cherokee XJ 2WD/4WD – 62340

#2 · Highest Lift

2. Rough Country 69620

• Material Type: Alloy Steel, Aluminum, Rubber, Zinc
• Weight: 233.3 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Six-and-a-half-inch build.

Why it ranks #2: The 6.5-inch system delivers the largest stated lift and includes an adjustable track bar, control arms, leaf springs, brake lines, and N3 shocks.

A 6.5-inch lift paired with an adjustable forged-steel track bar gives this X-Series kit its defining combination, providing substantial added clearance with a component intended to adjust track-bar position. Its extensive parts list also includes adjustable control arms, brake lines, and four N3 shocks.

Rough Country lists this system for 1984–2001 Cherokee XJ models and includes adjustable upper and lower control arms alongside the adjustable track bar, giving buyers multiple suspension components in one package. Four Premium N3 shocks, lifted leaf springs, coil springs, and sway-bar disconnects round out the kit. The transfer-case drop kit, pitman arm, and stainless-steel brake lines are also included; Rough Country recommends a certified technician and post-install checks.

Skip it if you want a lower 4.5-inch setup with M1 monotube shocks; the Rough Country 68640 lists that combination.

This kit fits XJ owners pursuing a high-clearance 6.5-inch setup with adjustable suspension components and a broad parts package. Its stated application is 1984–2001 Cherokee XJ; plan for knowledgeable installation and required checks.

Listed on Amazon as: Rough Country 6.5" X-Series Lift Kit for 1984-2001 Jeep Cherokee XJ – 69620

#3 · M1 Leaf Upgrade

3. Rough Country 68640

• Material Type: Alloy Steel
• Weight: 306.3 lb
• Material: Alloy Steel

Best for: M1 shocks and full leaf springs.

Why it ranks #3: This 4.5-inch kit pairs M1 monotube shocks with full rear leaf springs and adjustable control arms, with fitment specified for NP231 transfer-case models.

M1 monotube shocks with an internal floating piston distinguish this Rough Country 4.5-inch kit, with the feature intended to prevent shock fade and keep ride quality consistent under heavy loads. Full rear leaf-spring replacement and adjustable control arms make the package substantial as well as tall.

The kit is listed for 1984–2001 Cherokee XJ models with a 2.5L or 4.0L engine and NP231 transfer case, so the stated drivetrain details define its fit boundary. Four M1 monotube shocks pair with full rear leaf springs, which Rough Country says restore proper ride height and support long-term suspension reliability. Adjustable upper and lower control arms, a transfer-case skid plate, and sway-bar disconnects add further suspension and underbody components to the package.

Skip it if you have a 2WD XJ and want a kit explicitly listing 2WD compatibility; Rough Country's 670N2 states 2WD and 4WD.

This suits owners of 1984–2001 XJs with the listed 2.5L or 4.0L engine and NP231 transfer case who want a 4.5-inch lift. The transfer-case specification is an important fit boundary.

Listed on Amazon as: Rough Country 4.5" Lift Kit w/ M1 Shocks, Full Rear Leaf Springs & Adjustable Control Arms for Jeep Cherokee XJ (1984-2001) 2.5L/4.0L w/ NP231 Transfer Case

#4 · Axle-Specific Lift

4. Zone Offroad J8N

• Weight: 113.6 lb

Best for: Chrysler-axle 4.5-inch lift.

Why it ranks #4: The 4.5-inch suspension system is specified for XJs with a Chrysler 8.25 rear axle and includes coil springs, shocks, and U-bolts.

The Chrysler 8.25 rear-axle configuration sets this Zone Offroad 4.5-inch system apart, letting XJ owners shop for a lift package explicitly identified for that axle. The listing also specifies 3-inch-ID U-bolts and black Nitro shocks, with new front coil springs for off-road use.

This system is identified for 1984–2001 Jeep XJ models with a Chrysler axle, and the listed 4.5-inch lift sets its intended height. The included new front coil springs are described as capable of off-road use; the supplied 2-inch bump-stop extension is intended to increase wheel travel. Coil springs, shocks, and U-bolts are listed among the components. The axle-specific configuration makes confirming that rear-axle match important before choosing this kit.

Skip it if you need a stated 3-inch lift for a Chrysler 8.25 axle; the Roco 4×4 Zone ZONJ21N listing names that setup.

Choose this for a 1984–2001 XJ owner whose build calls for a 4.5-inch lift and the specified Chrysler rear axle. The listed 2-inch bump-stop extension supports added wheel travel; the axle configuration is a key boundary.

Listed on Amazon as: Zone Offroad 4.5" Suspension System w/ Chrysler 8.25 Rear Axle & 3" ID U-Bolts w/Black Nitro Shocks

#5

5. Rough Country 670N2

• Material Type: Alloy Steel
• Material: Alloy Steel

Best for: Complete three-inch refresh.

Why it ranks #5: Its 3-inch lift is listed for 2WD/4WD XJs and includes new front coils, rear leaf springs, four N3 shocks, and hardware.

A full set of lifted rear leaf springs distinguishes this three-inch Rough Country kit, giving XJ owners a rear suspension refresh rather than relying on added height at the original leaves. The package also includes front lifted coil springs and four N3 shocks for a coordinated lift.

The 3-inch setup is specified for 1984–2001 Cherokee XJ models with 2WD or 4WD, while the included lifted coil springs and replacement rear leaf springs address both ends of the suspension. Four N3 shocks are listed for on- and off-road use, and Rough Country says the kit maintains a smooth, factory-like ride while leveling the front with the rear. Hardware and U-bolts are included; the maker recommends certified installation and post-install checks.

Skip it if you want more than three inches of lift; the Rough Country 69620 offers a listed 6.5-inch lift.

This suits XJ owners seeking a moderate, level-stance change with new rear leaf springs and N3 shocks. Its stated range covers 1984–2001 2WD and 4WD Cherokees, but installation requires suspension knowledge and post-install checks.

Listed on Amazon as: Rough Country 3" Lift Kit for 1984-2001 Jeep Cherokee XJ 2WD/4WD – 670N2

#6

6. Rough Country 670XN2

• Material Type: Alloy Steel
• Weight: 90.2 lb
• Material: Alloy Steel

Best for: Three-inch kit with control arms.

Why it ranks #6: This 3-inch 2WD/4WD kit adds front coils, add-a-leaf springs, lower control arms, and four N3 shocks for a broader component package.

Lower control arms with Clevite OEM-style rubber bushings give this Rough Country 3-inch kit a distinct component advantage over the simpler listed 670N2 package. Lifted coil springs, add-a-leaf springs, and four N3 shocks round out a kit specified for 1984–2001 XJ models with 2WD or 4WD.

The listed lift suits 1984–2001 Cherokee XJ models with 2WD or 4WD and combines lifted front coils with add-a-leaf springs at the rear. That setup adds lift while retaining the OEM leaf springs, unlike a package that replaces the full rear leaf springs. Lower control arms use Clevite OEM-style rubber bushings, and four Premium N3 shocks are included. Rough Country describes the ride as factory-like and says the kit levels the front with the rear.

Skip it if you want full replacement rear leaf springs; Rough Country's 670N2 includes a new set of lifted rear leaves.

This works for XJ owners seeking a 3-inch lift with control arms and a factory-like ride claim. The rear setup uses add-a-leaf springs, so it is not the full rear-leaf replacement option in this roundup.

Listed on Amazon as: Rough Country 3" Lift Kit for 1984-2001 Jeep Cherokee XJ 2WD/4WD – 670XN2

#7 · Tire Size Listed

7. Tuff Country 43801KH

• Weight: 68 lb

Best for: 31-inch-tire 3.5-inch setup.

Why it ranks #7: It specifies a 3.5-inch front and 3-inch rear lift, plus a maximum tire size of 31×10.50, making its fitment guidance unusually concrete.

A stated maximum tire size of 31 by 10.50 inches gives this Tuff Country EZ-Flex kit a useful sizing reference for Cherokee owners planning a moderate lift. Its specified front 3.5-inch and rear 3-inch heights create a deliberately uneven front-to-rear lift profile.

The listing identifies compatibility with 1987–2001 Jeep Cherokee 4×4 models and pairs EZ-Flex springs with a 3.5-inch front lift and 3-inch rear lift. That height information helps buyers compare the kit with their planned stance, while the stated maximum tire size of 31×10.50 provides a concrete tire boundary. SX6000 shocks are named in the title. The parts listing otherwise says components are per item description, so the package details are less explicit here.

Skip it if you need a stated application covering 1984–1986 XJs; Rough Country's 670N2 lists 1984–2001 models.

This is a fit for 1987–2001 Cherokee 4×4 owners aiming for the listed 3.5-inch-front, 3-inch-rear profile and tires up to 31×10.50. That tire ceiling is the main boundary to weigh.

Listed on Amazon as: Tuff Country 43801KH 3.5" Lift Kit EZ-Flex with SX6000 Shocks 4×4 Compatible with/Replacement for Jeep Cherokee 1987-2001

#8

8. Rough Country 68030

• Material Type: Alloy Steel, Aluminum, Rubber, Zinc
• Weight: 29.6 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Mild lift with N3 shocks.

Why it ranks #8: The 1.5-inch lift suits a modest height change and includes four N3 shocks, coil spacers, and adjustable lift shackles.

At 1.5 inches, this Rough Country kit offers a modest lift while including four N3 shocks, coil spacers, and adjustable lift shackles. Rough Country says the setup levels the XJ front with the rear and maintains a smooth, factory-like ride, making it a restrained stance change.

The kit is specified for 1984–2001 Cherokee XJ models and uses coil spacers and adjustable lift shackles rather than a listed set of replacement leaf springs. Four Premium N3 shocks are included for on- and off-road use, while Rough Country describes the ride as factory-like and the stance as level front to rear. The parts make it a relatively compact package on paper; the manufacturer recommends certified installation and suspension post-install checks.

Skip it if you want a full rear-leaf-spring replacement and 3-inch lift; Rough Country's 670N2 includes both.

This fits XJ owners seeking a mild 1.5-inch height change with N3 shocks and a leveled stance. Its listed application is 1984–2001 Cherokee XJ; buyers wanting replacement rear leaf springs should choose a different package.

Listed on Amazon as: Rough Country 1.5" Lift Kit w/N3 Shocks for 1984-2001 Jeep Cherokee XJ – 68030

#9

9. Zone Offroad ZONJ21N

Best for: Three-inch Chrysler-axle lift.

Why it ranks #9: The product title specifies a 3-inch XJ lift with rear springs and a Chrysler 8.25 axle, but the supplied component details are limited.

A 3-inch lift with rear springs and a Chrysler 8.25 axle configuration is the defining combination in this Zone Offroad listing. Its title identifies compatibility with 1984–2001 Jeep XJ models, giving buyers a specific year span and rear-axle reference for narrowing their options.

The title specifies a 3-inch Zone Offroad setup for 1984–2001 Jeep XJ models and names rear springs and a Chrysler 8.25 axle, making those the key application details to check against a build. The supplied description emphasizes off-road performance, ground clearance, and heavy-duty materials, but does not enumerate the included suspension parts beyond the title. Its listed one-year manufacturer warranty is also provided; installation and fit specifics are not detailed in the supplied facts.

Skip it if you need listed front coils and four N3 shocks; Rough Country's 670N2 names those components in its package.

This listing suits an XJ owner seeking a 3-inch setup identified for the Chrysler 8.25 rear axle and rear springs. Its title gives the year span, but the supplied component details are limited.

Listed on Amazon as: Zone Offroad 84-01 Compatible with jeep XJ 3in w/Rear Springs-Chrysler 8.25 ZONJ21N

#10

10. Skyjacker JC301BPHLT

• Material Type: High Carbon Steel
• Material: High Carbon Steel

Best for: High-carbon-steel suspension.

Why it ranks #10: The listing identifies a suspension lift kit and high-carbon-steel material, but supplies no lift height or explicit XJ fitment details.

High-carbon steel is the clearest concrete specification for this Skyjacker suspension lift kit, offering buyers a named material when comparing listings. The product is identified as a lift kit, but the supplied details do not state a lift height or a Jeep Cherokee XJ year range.

Skyjacker specifies high-carbon steel as the kit material and identifies the included component category simply as lift kits. Those details establish the material and general product type, but do not explain the lift height, individual suspension parts, or a vehicle-year application in the supplied listing. Buyers should therefore treat this as a limited-information option rather than assuming a particular XJ configuration. The manufacturer directs users to follow its specifications and installation warnings for safe application.

Skip it if you need a specified XJ year range and lift height; Rough Country's 670N2 lists both for its 3-inch kit.

This may suit a buyer already able to establish application details from Skyjacker’s specifications before purchase. The supplied listing names high-carbon steel and a lift kit, but does not state an XJ year range or lift height.

Listed on Amazon as: Skyjacker SKY Suspension Lift Kit – JC301BPHLT