Best Tacoma Mud Flaps for Different Generations and Trim Fits

#1 · Best Overall

1. Toyota Mudguard Kit

• Material: Plastic
• Compatible with Vehicle Type: Toyota Tacoma
• Installation Type: Bolt-On

Best for: 2024+ Tacoma OEM-style coverage.

Why it ranks #1: The genuine four-piece kit is custom-designed for the newer Tacoma generation, includes mounting hardware, and uses bolt-on installation.

A genuine Toyota four-piece kit includes front and rear mudguards plus mounting hardware, giving 2024-and-newer Tacoma owners a vehicle-specific set in one package. Its custom fit is intended to integrate with the truck’s exterior while helping shield paint from rocks, mud, and road debris.

The set covers both driver and passenger sides at the front and rear, so buyers can address all four wheel areas with one kit. Included mounting hardware supports the bolt-on installation, while the Tacoma-specific fit is intended to integrate with the vehicle’s styling. Toyota lists plastic construction, and the stated protective role is to help guard the paint finish against rocks, mud, and other road debris. The listed fitment begins with 2024 Tacoma models.

Skip it if you own a 2016–2023 Tacoma; A-Premium’s 2016–2023 set targets that generation, subject to its fender-flare and SR restrictions.

Choose this genuine Toyota kit for a 2024+ Tacoma when you want a four-piece, vehicle-specific set with hardware and paint protection. Its key boundary is model year: it is not listed for earlier Tacoma generations.

Listed on Amazon as: Genuine Toyota 2024+ Tacoma Mudguard Kit, Black, 4-Piece Set, Driver and Passenger Side, PK389-35R00-P1

#2 · Broad Trim Fit

2. NEOXIST No-Drill Mud Flaps

• Material: Acrylonitrile Butadiene Styrene (ABS)…
• Compatible with Vehicle Type: for 2024-2026 Tacoma SR, for 2024-2026 Tacoma…
• Installation Type: Screw-In

Best for: Broad-trim 2024–2026 DIY fit.

Why it ranks #2: Its stated fit covers several newer Tacoma trims, including Off-Road, Pro, and Trailhunter, while factory mounting locations avoid drilling.

Factory mounting locations let NEOXIST’s 2024–2026 Tacoma flaps install without drilling, cutting, or modifying the truck. Its listed compatibility spans SR, SR5, TRD Off-Road, TRD Pro, and Trailhunter models, while the fit exclusions identify TRD Sport and aftermarket side skirts or armor kits.

NEOXIST says the fit was precision 3D-scanned from factory specifications, supporting an OEM-style fit across the listed Tacoma SR, SR5, TRD Off-Road, TRD Pro, and Trailhunter trims. The flaps use factory mounting locations, so installation needs no drilling, cutting, or vehicle modification. ABS and TPE are the listed materials. The package includes two front and two rear flaps, accessories, and an installation manual; TRD Sport and trucks with aftermarket side skirts or armor kits are excluded.

Skip it if you own a 2024–2026 TRD Sport; Muslogy’s MUS-24TACMF lists 2024–2026 Tacoma fitment without the same stated trim exclusion.

NEOXIST suits 2024–2026 Tacoma DIY installers seeking factory-location mounting and compatibility across several listed trims. TRD Sport owners and trucks with aftermarket side skirts or armor kits fall outside its stated fit.

Listed on Amazon as: No-Drill Mud Flaps for 2024-2026 Toyota Tacoma 4th Gen (Not Fit TRD Sport)

#3 · Made in USA

3. RokBlokz Mud Flaps

• Material: manmade
• Compatible with Vehicle Type: Truck
• Installation Type: Bolt-On

Best for: Flat-profile gravel protection.

Why it ranks #3: This four-piece set is designed for the newer Tacoma, includes mounting hardware and instructions, and its flat design avoids fender contact.

RokBlokz uses a protective flat design that avoids contact with the fender, helping prevent potential paint scratches while providing coverage from road debris and gravel. The USA-made set includes four flaps for 2024+ Tacoma front and rear fitment, plus mounting hardware and detailed instructions.

The flat profile is intended to keep the mud flaps from contacting the fender, addressing a specific paint-scratch concern while maintaining the product’s stated road-debris and gravel protection. The four-piece set covers front and rear positions on 2024+ Toyota Tacoma models. Mounting hardware and detailed installation instructions are included to support fitting the kit. RokBlokz describes the flaps as lightweight and extremely durable, and identifies the set as made in the USA.

Skip it if you need explicit trim-by-trim fitment details; NEOXIST lists supported Tacoma trims and clearly names its exclusions for 2024–2026 models.

RokBlokz suits 2024+ Tacoma owners prioritizing a flat profile, fender clearance, and gravel protection with installation hardware included. The listing does not provide trim-by-trim fitment details, so that information is a relevant boundary.

Listed on Amazon as: RokBlokz Mud Flaps for 2024+ Toyota Tacoma – Set of 4 for Front and Rear – Multiple Colors Available – Includes Mounting Hardware and Detailed Installation Instructions (Black with Black Logo)

#4 · Gen3 Coverage

4. REK GEN Mud Flaps

• Material: Plastic, Rubber
• Compatible with Vehicle Type: Tacoma
• Installation Type: Bolt-On

Best for: No-drill Gen3 Tacoma protection.

Why it ranks #4: Designed for all Gen3 Tacoma models, this heavy-duty plastic-and-rubber set includes hardware and instructions for installation without drilling.

REK GEN pairs a stated no-drill installation with heavy-duty construction for Tacoma Gen3 owners seeking mud-flap coverage without cutting or modifying the truck. The set is listed for 2016–2023 models, and included mounting hardware and instructions support a guided bolt-on installation.

The Gen3-specific fitment covers Toyota Tacoma models from 2016 through 2023, giving buyers a clear generation range to check. REK GEN says installation requires no drilling or modifications and includes mounting hardware and detailed instructions, helping owners follow the supplied process. Plastic and rubber are the listed materials, while the product describes the flaps as heavy duty for tough conditions. The factory-style look is another stated design aim alongside off-road protection.

Skip it if you own a 2024+ Tacoma; Muslogy’s MUS-24TACMF is listed for 2024–2026 models and includes front and rear flaps.

REK GEN suits 2016–2023 Tacoma owners who want heavy-duty guards and a no-drill installation supported by included instructions and hardware. Its Gen3 range is the fit boundary; newer Tacoma owners need a different listing.

Listed on Amazon as: REK GEN Mud Flaps Compatible with Toyota Tacoma Gen3 (2016–2023) – Heavy Duty Mud Guards for Off-Road Protection – Easy Install – Durable Toyota Tacoma Accessories – USA Made (Stock, Black)

#5

5. Muslogy Mud Flaps

• Material: Acrylonitrile Butadiene Styrene (ABS)
• Compatible with Vehicle Type: Truck
• Installation Type: Push Pin

Best for: Laser-scanned 2024+ Tacoma fit.

Why it ranks #5: The four-piece ABS set is made for the newer Tacoma, uses push-pin installation, and includes screws and an instruction sheet.

Muslogy uses 3D laser scanning for its 2024–2026 Tacoma mud flaps, tying the fit claim to the latest Tacoma body shape. Its four-flap package includes tools and instructions, while impact-resistant ABS is specified for sturdy, lasting use and protection from stone chips.

The set contains two front flaps, two rear flaps, a tools bag, and instructions, giving owners both axle coverage and listed installation items in one package. Muslogy says the fit is based on 3D laser scanning, which it uses to shape the guards for 2024–2026 Tacoma models. ABS construction is described as impact resistant and sturdy. The product’s stated protective purpose includes helping guard the fender and rocker panel from stone chips and other damage.

Skip it if you drive a 2016–2023 Tacoma; REK GEN’s T1001 is listed for that generation and includes installation hardware and instructions.

Muslogy suits 2024–2026 Tacoma owners who want laser-scanned fit claims, ABS guards, and a package with tools and instructions. Its stated generation range is the key fit boundary for buyers.

Listed on Amazon as: Muslogy Mud Flaps Splash Guards for Toyota Tacoma 2026 2025 2024, OEM Style

#6

6. A-Premium Mud Flaps

• Material: Polypropylene (PP), Thermoplastic Elastomers…
• Compatible with Vehicle Type: (with fender flares, not fit SR), fits for…
• Installation Type: Bolt-On

Best for: 2016–2023 flared-truck fit.

Why it ranks #6: This four-piece PP-and-TPE set covers the previous Tacoma generation and includes retainers and U-nut clips, but requires fender flares and excludes SR.

A no-drill installation and a four-flap package make A-Premium’s Tacoma set a practical match for owners of 2016–2023 models with fender flares. Its PP+TPE composite construction is specified for toughness and wear resistance, while the fitment notes clearly exclude SR models.

The package includes two front and two rear flaps, along with splash-shield retainer clips and U-nut clips, giving installers listed hardware for the set. A-Premium describes installation as requiring no drilling, which avoids adding drilled holes during fitting. Its PP+TPE composite is described as tough, wear-resistant, and resistant to aging across temperature environments. Fitment is specific: the listing says it fits 2016–2023 Tacoma pickups with fender flares and does not fit SR models.

Skip it if you have a 2024+ Tacoma; Toyota’s Genuine Toyota PK389-35R00-P1 kit is listed for that newer generation.

This set suits 2016–2023 Tacoma owners with fender flares who want a no-drill install and included clips. Check the stated trim restriction carefully: it does not fit SR models and is not listed for 2024+ trucks.

Listed on Amazon as: A-Premium Mud Flaps, Compatible with Toyota Tacoma 2016-2023

#7

7. JTYZSM Mud Flaps

• Material: Thermoplastic Elastomers (TPE)
• Compatible with Vehicle Type: Only for 2005-2015 Tacoma with OEM Fender Flares
• Installation Type: Screw-In

Best for: Older OEM-flare Tacoma coverage.

Why it ranks #7: A TPE front-and-rear set for older Tacomas with OEM fender flares, it requires no drilling and includes stainless-steel screw fittings.

Stainless-steel screw fittings and a no-drill installation are the defining combination in JTYZSM’s set for 2005–2015 Tacoma trucks with OEM fender flares. Four front and rear guards provide coverage around the truck, while the listed TPE construction is intended for varied weather conditions.

This set is specifically listed for 2005–2015 Tacomas with OEM fender flares, so its generation and flare requirement determine whether it belongs on your shortlist. The product is made from thermoplastic elastomers, described as cold- and heat-resistant for use in harsh environments. Although installation is listed as screw-in, the verified details say no drilling is required and stainless-steel screw fittings are supplied, supporting installation without drilling the original vehicle.

Skip it if you have a 2016–2023 Tacoma with fender flares; A-Premium’s 2016–2023 set is listed for that generation, except SR models.

Consider this set for a 2005–2015 Tacoma with OEM fender flares when no-drill fitting and weather-resistant TPE matter. Its generation-specific fit excludes later Tacomas, and the screw-in mounting still uses supplied fittings.

Listed on Amazon as: Mud Flaps for 2005-2015 Toyota Tacoma with OEM Fender Flares, No Drill Splash Guards Front & Rear Truck Mud Guards with Hardware Accessories Mudflaps Set(4pcs)

#8

8. LINGHANG Mud Flaps

• Material: Plastic
• Compatible with Vehicle Type: Compatible with Toyota Tacoma 2024-2026
• Installation Type: Screw-In

Best for: 2024+ no-drill replacement fit.

Why it ranks #8: This PP-and-TPE four-piece kit fits many newer Tacomas, but excludes TRD Sport and vehicles with side skirts or armor kits.

LINGHANG identifies its four-piece set as a direct replacement for Toyota part PK389-35R00-P1, giving 2024–2026 Tacoma owners a clear reference point for fit. PP+TPE construction is specified for flexibility and durability, while no-drilling installation is highlighted for the front-and-rear kit.

The listing specifies compatibility with 2024–2026 Tacoma models but excludes TRD Sport and vehicles with side skirts or armor kits, making trim and exterior equipment important checks. PP+TPE material is described as flexible and durable, with the product claiming resistance to cracking or breaking under varied weather conditions. Four flaps, instructions, and screws are included. The listing describes a no-drilling kit, while its installation type is categorized as screw-in.

Skip it if you have a 2024–2026 TRD Sport; NEOXIST also excludes that trim, while its listed fit includes other specified Tacoma trims.

This is a candidate for 2024–2026 Tacoma owners seeking a no-drill, OEM-reference replacement set. Confirm that your truck is not a TRD Sport and has no side skirts or armor kits before choosing it.

Listed on Amazon as: Mud Flaps Splash Guards Fit for Toyota Tacoma 2024-2026, 4PCS No Drilling Pickup Wide Mudguards Kit, 4th Tacoma Truck Exterior Accessories Front & Rear Tire, All Road & All Weather Protect Wheel Liner

#9 · Temperature Range

9. Uilffur Mud Flaps

• Material: Plastic
• Compatible with Vehicle Type: Truck
• Installation Type: Screw-In

Best for: Extreme-temperature 2024+ coverage.

Why it ranks #9: The newer-generation four-piece kit claims a working temperature range from -40°F to 212°F and uses existing mounting points without drilling.

A stated operating range from -40°F to 212°F is the key differentiator in Uilffur’s four-piece kit for 2024–2026 Tacoma models. The listing says the plastic flaps stay flexible in severe cold and resist warping in heat, while plug-and-play, no-drill installation uses factory mounting points.

Uilffur specifies front and rear coverage for 2024–2026 Tacoma models and describes the fit as tailored to those trucks. Its temperature range of -40°F to 212°F connects directly to year-round use, with the product description citing flexibility in cold and resistance to heat-related warping. No-drill plug-and-play installation uses existing factory mounting locations, avoiding drilling. The package lists four flaps, a manual, and fasteners; installation is also categorized as screw-in.

Skip it if you drive a 2024–2026 TRD Sport or have side skirts; LINGHANG’s listing also excludes TRD Sport, so check its fit restrictions before choosing.

This kit fits buyers prioritizing stated cold-to-heat resistance and no-drill mounting on a 2024–2026 Tacoma. Its listed model-year range is the boundary, so owners of earlier generations should seek a generation-specific set.

Listed on Amazon as: 4PCS Mud Flaps for 2024-2027 Toyota Tacoma Front & Rear

#10

10. Zekzoop Mud Flaps

• Material: Polypropylene (PP)
• Compatible with Vehicle Type: Compatible with 2024-2026 Toyota Tacoma
• Installation Type: Screw-In

Best for: 2024+ Tacoma without wheel flares.

Why it ranks #10: This four-piece PP set is limited to newer Tacomas without wheel flares and excludes several off-road trims, making its fit unusually narrow.

A specific fit for 2024–2026 Tacoma models without wheel flares sets the Zekzoop kit apart from broader-fit listings. Its four-piece polypropylene guards are described as rigid and waterproof, with high- and low-temperature tolerance intended to support protection across different weather and road surfaces.

The listed fitment is narrow: 2024, 2025, and 2026 Tacoma models without wheel flares, with TRD Off-Road, TRD Off-Road i-FORCE MAX, Trailhunter, and TRD Pro explicitly excluded. That detail makes trim and flare configuration essential before selecting this set. The flaps use polypropylene, described as rigid and waterproof and able to withstand high and low temperatures. The package contains mud flaps, and installation is listed as screw-in.

Skip it if you own a 2024–2026 TRD Off-Road, TRD Pro, or Trailhunter; NEOXIST lists fitment for those trims, but excludes TRD Sport.

Choose this set only if your 2024–2026 Tacoma has no wheel flares and is not among the excluded trims. Its polypropylene construction and weather resistance suit varied conditions, but trim fitment is the decisive boundary.

Listed on Amazon as: Mud Flaps for 2024-2026 Toyota Tacoma Without Fender Flares (4PCS)