Best Recessed Trolling Motor Tray for Different Pedal Setups

#1 · Best Overall

1. Baldwin Iron Works Aluminum Tray

• Material: Aluminum
• Material Type: Aluminum

Best for: Heavy-duty multi-brand aluminum tray.

Why it ranks #1: All-aluminum 0.120-inch construction, cutting template, drain hose, cup hole and tool holders make a well-equipped option; compatibility excludes Terrova.

Its .120-inch all-aluminum construction gives this recessed tray a notably thick mounting structure, while compatibility spans Garmin, Lowrance, MotorGuide, Power-Pole, and most Minn Kota motors except Terrova. The included cutting template supports deck layout, and a drain hole with hose helps channel water away from the foot-control area.

The 17.5-by-10.5-inch inside-bottom area and 19.25-by-12.5-inch top lip give buyers concrete dimensions for planning a deck opening. A powder-coated, UV-resistant black finish adds a protective surface, while the stainless-steel cup hole and tool holders keep small items close at hand. The supplied template helps guide cutting, and the included drain hose provides a route for water leaving the tray rather than letting it remain around the pedal.

Skip it if you use a Minn Kota Terrova; this tray’s stated fit excludes that motor family.

Choose this for a broad-brand installation that benefits from thick aluminum, a cup hole, and tool holders. Its stated Minn Kota compatibility excludes Terrova, so verify your motor family before planning the deck cut.

Listed on Amazon as: Baldwin Iron Works-Made in America-Aluminum-Recessed Trolling Motor Foot Pedal Pan Tray Black Compatible with All Garmin/Lowrance/Minn Kota//Motor Guide/Power-Pole Trolling Motors

#2 · Best Corded Option

2. Heurofosh Corded Foot Tray

• Material: Aluminum
• Material Type: Aluminum
• Weight: 2.72 kg

Best for: Corded-pedal boat retrofit.

Why it ranks #2: Specifically described for corded foot pedals and most boat brands; its 19.5-by-12-inch flange, included bolts and cutting drawing add practical detail.

A 191⁄2-by-12-inch flange and 17-by-93⁄4-inch interior give this aluminum tray a defined footprint for fitting many boat decks around a corded trolling-motor pedal. Its four-inch depth recesses the control area, and the supplied cutting drawing and installation bolts help move the job from layout to mounting.

The stated fit covers most boat brands with trolling-motor foot controls, while the title specifically identifies a corded foot pedal. Buyers can compare the 191⁄2-by-12-inch outside flange and 17-by-93⁄4-inch interior against their deck and pedal area before cutting; the four-inch depth sets the recess. Aluminum keeps the tray lightweight at 2.72 kg, and included bolts and a cutting drawing support installation. The listing also identifies salt water as a recommended use.

Skip it if you need a tray identified for a wireless pedal; this listing specifies a corded foot pedal.

Consider this for a boat owner fitting a corded foot control who wants stated dimensions, installation bolts, and a cutting drawing. Its title specifies corded pedals, so buyers with another pedal type should weigh that boundary.

Listed on Amazon as: Trolling Motor Foot Tray for Most Boat Brands Corded Foot Pedal

#3 · Best Drainage Kit

3. Marinetech Panther Tray

• Weight: 5.8 lb

Best for: Low-maintenance molded polyethylene tray.

Why it ranks #3: High-impact UV-resistant polyethylene, a forward-taper design and an included 3/8-inch-ID, 8-foot drain tube suit Minn Kota and MotorGuide pedals.

High-impact, UV-resistant high-density polyethylene gives this Panther tray a molded construction with color throughout, so its surface has no paint layer to chip or fade. A forward taper levels the foot pedal and helps water drain faster, while the included tube routes water away from the recessed control area.

The forward-taper design links pedal position with drainage: the pedal sits level as water moves toward the drain. A 3/8-inch-inside-diameter, eight-foot flexible vinyl tube carries that water away, which gives the installation a specified drainage route. The tray is stated to fit all Minn Kota and MotorGuide foot-control trolling motors. Installation instructions, a cutting template, drain tube, and hardware are included to guide deck preparation and mounting.

Skip it if you use a Garmin or Lowrance foot control; this tray is specified for Minn Kota and MotorGuide.

This suits Minn Kota or MotorGuide owners wanting a molded, paint-free surface and a defined water-drainage route. Its stated compatibility names those two brands, so check carefully if your pedal comes from another manufacturer.

Listed on Amazon as: Marinetech Panther ATV Panther 559815 Recessed Trolling Motor Foot-Control Tray

#4 · Best Ultrex Fit

4. Baldwin Ultrex Quest Tray

Best for: Pre-drilled Ultrex and Quest setup.

Why it ranks #4: Pre-drilled with rivet nuts and stainless mounting screws, this aluminum tray is specifically made for Minn Kota Ultrex and Quest pedals only.

Pre-drilled mounting holes with rivet nuts make this aluminum tray a targeted option for Minn Kota ULTREX and QUEST pedals, rather than a general-purpose pan. The included stainless-steel mounting screws support the installation, while a drain hole with hose and cutting template address water routing and deck layout.

Its stated fit is for ULTREX and QUEST pedals only, giving buyers a clear compatibility boundary before cutting into a deck. The 17.5-by-10.5-inch inside-bottom dimensions help with opening and pedal-area planning, while the 19.25-by-12.5-inch top lip provides the outer reference. Rivet nuts are installed in the pre-drilled mounting points, and the included screws, template, and drain hose support mounting and drainage workflow.

Skip it if you run a MotorGuide, Garmin, or another pedal; this model is specified for ULTREX and QUEST pedals only.

This suits owners installing a Minn Kota ULTREX or QUEST pedal who want pre-drilled mounting points and supplied hardware. Its pedal-only compatibility is narrow, so other Minn Kota models and other brands fall outside the stated fit.

Listed on Amazon as: Baldwin Iron Works-Made in America-Aluminum-Recessed Trolling Motor Tray-Per Drilled for Fits: Ultrex/Quest Trolling Motors

#5

5. Lurwind Aluminum Tray

• Material: Aluminum
• Material Type: Aluminum

Best for: Pre-drilled blue aluminum mount.

Why it ranks #5: Its 19.375-by-12-inch footprint, 17.75-by-10.5-inch opening, 4-inch depth, pre-drilled holes and included housing offer useful fit details.

Pre-drilled mounting holes and a 193⁄8-by-12-inch outer footprint make this blue aluminum tray a clearly dimensioned option for planning a recessed pedal installation. Its 173⁄4-by-101⁄2-inch pedal opening and four-inch depth help buyers compare the interior space with their control and available deck area before mounting.

The stated outer dimensions give a deck-planning reference, while the separate pedal-opening measurements clarify the usable interior space. Pre-drilled holes are described as simplifying installation by removing the need to measure hole positions. Powder-coated aluminum is specified for wear and rust resistance, and the coating is UV-protected for sun exposure. The blue finish is a distinct visual choice for a fishing-boat setup; the listing describes compatibility with most trolling-motor tray pedals.

Skip it if you want a black-finished tray; this model is blue, while the Baldwin Iron Works B09HRKDS11 is black.

Choose this for a fishing boat where a blue finish, pre-drilled mounting, and clearly stated opening dimensions suit the plan. Check the 193⁄8-by-12-inch outer footprint and four-inch depth against the intended deck location.

Listed on Amazon as: Lurwind Recessed Trolling Motor Foot Pedal Tray – Blue Powder-Coated Aluminum, Fits Most Trolling Motor Tray Pedals, 19.375" x 12" Pre-Drilled Mount

#6

6. KUAFU Foot Pedal Pan

• Material: Aluminum
• Material Type: Aluminum
• Weight: 2.64 kg

Best for: Most-brand recessed deck platform.

Why it ranks #6: The universal design is stated to accommodate most brands; aluminum construction and 12-by-19.25-inch outside dimensions help with fit checks.

KUAFU describes this aluminum pan as compatible with most brands, including MinnKota and MotorGuide, giving multi-brand boat owners a broad stated fit. Its embedded foundation keeps the pedal level with the deck, and the specified 12-by-191⁄4-inch outside size gives buyers a useful starting point for deck planning.

Keeping a foot control level with the deck is the practical purpose KUAFU assigns to this recessed pan; the listing also says the embedded foundation helps protect and organize the pedal area. Its outside dimensions are 12 inches wide by 191⁄4 inches long, which helps buyers assess the deck footprint before installation. Aluminum construction is specified, and the product is identified for salt-water use. The compatibility claim covers most brands rather than naming every possible motor.

Skip it if you need a lighter listed tray; this model’s supplied specifications give its weight as 2.64 kg.

This fits buyers seeking a recessed, level pedal platform for a boat with a commonly used motor brand. Its most-brand compatibility is broad but not universal, and the 12-by-191⁄4-inch outside footprint needs to suit the available deck.

Listed on Amazon as: KUAFU Trolling Motor Foot Pedal Pan Compatible with Most Brands

#7

7. HECASA Foot Pedal Pan

• Material: Aluminum
• Material Type: Aluminum
• Weight: 5.8 lb

Best for: Universal-brand aluminum pedal pan.

Why it ranks #7: An aluminum pan with a powder-coated finish and universal fitment claim offers a simple embedded base, though the supplied specifications omit dimensions.

Its universal-fit claim covers trolling-motor foot pedals from any brand, including MinnKota and MotorGuide, making this aluminum pan a flexible choice when brand compatibility is the main concern. The powder-coated surface finish adds a finished outer layer, and the embedded base gives the pedal a defined place on the deck.

HECASA describes the pan as a sturdy embedded base for a trolling-motor foot pedal. That recessed placement can help keep sharp pedal edges from directly scratching the deck, connecting the mounting style to a practical protection benefit. Its aluminum construction and powder-coated surface provide the stated material and finish, while the universal-fit description names MinnKota and MotorGuide among compatible brands. Product dimensions are referenced in the images, so those are the place to assess the physical footprint.

Skip it if you need the footprint in the supplied specifications; this listing directs buyers to product images for dimensions.

This is a candidate for boat owners prioritizing a universal-brand claim and an embedded aluminum base to protect the deck. Since dimensions are referenced in images rather than stated here, assess the footprint before planning an opening.

Listed on Amazon as: HECASA Trolling Motor Foot Pedal Pan Compatible with MinnKota MotorGuide

#8

8. Moxweyeni Foot Pedal Pan

• Material: aluminum, stainless steel
• Weight: 4.2 lb

Best for: Drainage-ready installation package.

Why it ranks #8: The package lists stainless screws, a water pipe and snap ring, plus an aluminum-and-stainless build; compatibility details are limited to Minn Kota.

A built-in drain hole paired with a supplied water pipe gives this aluminum foot-pedal pan a defined route for water management. The package also includes 11 stainless-steel screws and a stainless-steel snap ring, so buyers receive multiple installation components alongside the tray rather than sourcing those listed parts separately.

The 20.67-by-12.8-by-6.1-inch dimensions provide a reference for comparing the pan with deck space and pedal placement. Its drain hole and included water pipe connect the tray’s drainage feature to a practical water-routing workflow. Aluminum and stainless steel are the listed materials, while the 11 screws and snap ring add specified mounting components. The title identifies compatibility with Minn Kota motors, which is the stated brand boundary for buyers checking their control setup.

Skip it if you use a MotorGuide pedal; this listing identifies compatibility with Minn Kota motors.

This suits a Minn Kota owner who values a supplied drain pipe and several stainless-steel installation parts. Compare the 20.67-by-12.8-inch footprint and six-inch dimension with the deck, and keep the stated brand fit in mind.

Listed on Amazon as: Moxweyeni Trolling Motor Foot Pedal Pan, Compatible with Minn kota Motor

#9

9. Synhalt Recessed Pedal Pan

Best for: Large Minn Kota and MotorGuide pan.

Why it ranks #9: Aluminum construction and stated compatibility with Minn Kota and MotorGuide are useful, but the supplied listing gives fewer fit and installation details.

At approximately 20.75 by 12.75 by 5 inches, this recessed aluminum pan offers a defined, roomy footprint for compatible Minn Kota and MotorGuide foot controls. Its black powder-coated finish supplies a finished surface, while the recessed arrangement places the pedal area down into the boat deck for a cleaner control setup.

The listed dimensions give buyers a concrete starting point for comparing the pan with available deck space and pedal placement. A five-inch depth establishes how far the control area sits into the deck, while the stated Minn Kota and MotorGuide compatibility sets a clear motor-brand boundary. Aluminum construction and a black powder-coated finish are the listed material and surface details; the product description presents the pan as a dedicated mounting area for a more organized foot-control setup.

Skip it if you operate a Garmin or Lowrance pedal; the stated compatibility names Minn Kota and MotorGuide controls.

Choose this when your Minn Kota or MotorGuide foot control needs a sizeable recessed area and its 20.75-by-12.75-inch footprint suits the deck. Buyers using other brands should note the listing’s narrower compatibility statement.

Listed on Amazon as: Recessed Trolling Motor Foot Pedal Pan for Minn Kota & MotorGuide

#10

10. Fsehyue Steel Control Pan

Best for: Steel replacement with pre-drilled holes.

Why it ranks #10: This steel tray has 19.25-by-12-inch outside dimensions and a 17-by-9.62-by-4-inch mounting area, but its steel construction and no included components rank it last.

A steel body with pre-drilled mounting holes makes this black tray a ready-to-position option for many boats, with dimensions specified as 19.25 by 12 inches outside and 17 by 9.62 inches inside. Its four-inch depth establishes the recess, while the listing presents it as a replacement for the 100RTMP.

The outside and inside measurements let buyers compare the tray’s overall footprint with the intended opening and pedal area before installation. Pre-drilled mounting holes can simplify positioning, while the four-inch depth sets the recessed control height relative to the deck. Its steel construction and black surface are specified, and the listing describes a stable embedded base that can keep the pedal level with the deck. Professional installation is recommended, a useful consideration for planning the mounting work.

Skip it if you require an aluminum tray; this model is steel, while other listed pans use aluminum.

Consider this for a buyer seeking a pre-drilled steel replacement with stated inner and outer measurements. Professional installation is recommended, and its steel construction makes it a poor material match for shoppers specifically seeking aluminum.

Listed on Amazon as: Recessed Boat Trolling Motor Foot Pedal Tray Universal Steel Control Pan Replaces 100RTMP with Predrilled Mounting Holes Black Suitable for Most Boats