Best Power Tongue Jack for RVs and Trailers

#1 · Best Overall

1. Kohree 7500lb Dual-Wire Jack

• Load Capacity: 7500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer

Best for: Level-conscious RV hitching.

Why it ranks #1: Its 7,500-pound capacity, built-in level, dual-wire connection, and included manual crank suit heavy-duty hitching and leveling tasks.

A built-in level gives the Kohree 7,500-pound electric jack a practical advantage when hitching and leveling an RV or travel trailer. Button controls handle raising and lowering, while its dual-wire direct connection is specified for faster installation, bringing setup and routine operation together in one package.

The 7,500-pound lifting capacity serves buyers handling substantial RV, camper, or travel-trailer tongue loads. A built-in level supports checking position during leveling, while the simple press-button control makes raising and lowering less hands-on. Kohree specifies a dual-wire direct connection for quick installation, so buyers should plan around that wiring approach. The included jack cover adds a storage and weather-protection accessory, and the manual crank handle supplies an alternative operating method when needed.

Skip it if you want a ready-wired 7-way plug connection; the Kohree KR1215 4000 lbs model is specified to plug into one.

Pick this Kohree for an RV or travel-trailer setup where a built-in level and 7,500-pound rating suit the job. Its direct dual-wire connection is the key installation consideration before choosing it.

Listed on Amazon as: Kohree 7500lbs Electric Trailer Jack with Dual Wire, Built-in Level

#2 · Highest Capacity

2. POLESTAR 7500lb Electric Jack

• Load Capacity: 7500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer, Truck
• Weight: 23.9 lb

Best for: Heavy-duty trailer lifters.

Why it ranks #2: The 7,500-pound dynamic capacity and stated 10,000-pound static lifting power distinguish it for buyers prioritizing lifting strength.

A 7,500-pound dynamic load rating gives the POLESTAR electric jack substantial lifting capacity for demanding trailer and RV setups. Its listed 10,000-pound static lifting power adds a separate figure for stationary support, making the distinction useful when comparing lifting needs with a trailer’s resting load.

The alloy-steel construction and 7,500-pound dynamic capacity suit buyers prioritizing substantial lifting strength for RVs, trailers, or trucks. Its 10,000-pound static lifting figure describes a different operating condition, so it should not be confused with the dynamic rating when assessing a job. The included crank provides a manual operating option, while the waterproof cover supports protection when the jack is stored or exposed to outdoor conditions. At 23.9 pounds, it is a substantial component to handle during installation.

Skip it if you need a stated travel range or mounting-hole dimensions; the supplied POLESTAR specifications do not list either measurement.

Choose this POLESTAR for an RV, trailer, or truck setup where its high dynamic and static lifting figures match the job. Weigh its 23.9-pound handling weight and confirm the mounting arrangement against your trailer.

Listed on Amazon as: POLESTAR Electric Trailer Jack, 7500lbs Electric Power A-Frame Tongue Jack

#3 · Best Night Lighting

3. Husky Super Brute 5000

• Load Capacity: 5 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Trailer
• Weight: 30.1 lb

Best for: Remote nighttime hookups.

Why it ranks #3: It pairs 5,000-pound capacity with 18 inches of travel, a 6-inch drop-down leg, remote control, and three LED lights.

A remote and three-sided high-output LED lighting give the Husky 82022 practical advantages for positioning and connecting a trailer after dark. Its listed feature set also includes 18 inches of travel and a six-inch drop-down leg, while the product title identifies a 5,000-pound capacity.

The 18-inch travel range and six-inch drop-down leg provide adjustment for different trailer heights, ground conditions, and hitch alignments. Three-sided high-output LEDs improve visibility around the hitch area during nighttime connections, while the remote offers a control option for operating the jack. Husky says the unit fits most A-frame couplers, making that a useful starting point when assessing compatibility. The title states a 5,000-pound capacity; the supplied specifications field instead shows five pounds, so verify the applicable rating before use.

Skip it if you need an unambiguous capacity listing before purchase; the Husky 82022 details conflict between five and 5,000 pounds.

Consider this Husky if remote operation, hitch-area lighting, and the listed travel range fit your trailer setup. Resolve the conflicting capacity figures in the supplied listing before relying on its load rating.

Listed on Amazon as: Husky Towing 82022 Super Brute Electric Trailer Tongue Jack, 5000 lb Capacity, 18 Inch Travel, with Remote and 3 LED Lights, Bright Silver

#4 · Best 7-Way Plug

4. Pafessa Ninja 5000

• Load Capacity: 5000 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: RV, Trailer
• Weight: 33 lb

Best for: Long-reach 7-way A-frame jack.

Why it ranks #4: Its 5,000-pound capacity, 21-inch travel, 7-way plug, and 7-inch footpad with 4.5-inch extension offer useful reach and connection flexibility.

A 21-inch travel range and a 7-inch footpad adding 4.5 inches give the Pafessa Ninja substantial specified vertical adjustment. Its 5,000-pound capacity and 7-way plug support an A-frame setup where buyers want extended reach and a connection to a ready-wired vehicle connector.

The 5,000-pound lifting capacity sets the stated load ceiling, while 21 inches of travel and an adjustable footpad with 4.5 inches of added extension give flexibility in height adjustment. Its seven-way plug and seven-foot power supply line simplify connection for a compatible ready-wired vehicle. Pafessa specifies a universal round mounting flange with multiple elongated holes, which can help accommodate mounting positions on many A-frame trailers and RVs. Mounting hardware is included; the emergency crank socket does not include a driver handle.

Skip it if you need an emergency-crank driver handle in the package; this Pafessa lists the socket but not the handle.

This Pafessa suits A-frame owners needing its 5,000-pound rating, extended travel, and 7-way connection. Check the flange and mounting-hole arrangement for your trailer, and provide a driver handle if manual cranking matters.

Listed on Amazon as: 12V Electric A-Frame Trailer Tongue Jack with 7 Way Plug – 5000lb Lift Capacity 21” Travel Add 4.5” with 7” Drop Foot,Protective Cover Included

#5 · Longest Warranty

5. Xenjum 5000lb Electric Jack

• Load Capacity: 5000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Horse Trailer, RV, Trailer, Utility Trailer
• Weight: 18 lb

Best for: Level-guided 5,000-pound lifting.

Why it ranks #5: A 5,000-pound capacity, bubble level, manual crank, waterproof cover, and listed two-year warranty make it a feature-rich option.

An integrated bubble level gives the Xenjum 5,000-pound electric jack a visible aid for checking trailer position during leveling. The listing also specifies a reinforced outer tube and heavy-duty base to reduce flexing and wobbling, with a stated fit for RVs, campers, and travel trailers up to 35,000 pounds GVWR.

The 5,000-pound tongue-weight capacity is distinct from the listing’s 35,000-pound maximum trailer GVWR, so buyers should assess both figures against their setup. The bubble level assists with position checks, while the reinforced outer tube and heavy-duty base are specified to reduce flexing and wobbling during operation. High-carbon steel is also listed as a strength feature. A manual crank, mounting hardware, and waterproof jack cover are included, giving buyers both a manual option and accessories for installation and storage.

Skip it if you are choosing by trailer GVWR alone; the Xenjum listing separately states a 5,000-pound tongue-weight capacity and 35,000-pound GVWR.

Choose Xenjum if a bubble-level check and specified anti-wobble construction suit your RV or trailer setup. Distinguish its 5,000-pound tongue-weight rating from the listed 35,000-pound GVWR when confirming the relevant load.

Listed on Amazon as: Electric Trailer Jack with Bubble Level, Power Tongue Jack 12V DC, 5000 lbs

#6

6. Husky Brute HB4500

• Load Capacity: 4500 lb
• Material: Steel
• Compatible with Vehicle Type: Trailer
• Weight: 30 lb

Best for: Quiet, illuminated trailer lifting.

Why it ranks #6: This 4,500-pound jack has a 6-inch drop-down leg, three LED work lights, a water-resistant cover, and a stated 25-amp draw at rated load.

A 25-amp draw at rated load and three LED work lights distinguish the Husky HB4500 for owners balancing electrical demand with nighttime visibility. Its 4,500-pound capacity and 18-inch full stroke with a six-inch drop-down leg add specified lifting range for A-frame trailer use.

The HB4500 combines a 4,500-pound capacity with an 18-inch full stroke and six-inch drop-down leg, giving owners a broad adjustment range for trailer positioning. Three LED work lights illuminate the coupler and hookup brackets, which supports hookups in low light. Husky specifies a 25-amp draw at rated load and a quiet operating design, useful considerations for power planning and operating environment. Smart Stop cuts power before the nut reaches the hard stop, reducing mechanical stress and current draw.

Skip it if you want a remote-control jack; the Husky 82022 Super Brute lists a remote and three-sided LED lighting.

The HB4500 suits trailer owners who value quiet operation, hookup lighting, and an 18-inch stroke. Consider the 25-amp rated-load draw alongside your power setup, and verify the A-frame mounting fit for your trailer.

Listed on Amazon as: Husky HB4500 4500 lbs. Brute Power Jack, Hammer Gray Finish

#7

7. Kohree 4000lb 7-Way Jack

• Load Capacity: 4000 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer
• Weight: 18.5 lb

Best for: Ready-wired 7-way hookups.

Why it ranks #7: Its 4,000-pound capacity and 7-way connector avoid hard wiring or grounding, while two LED lights and a manual crank are included.

A 7-way connector lets the Kohree 4,000-pound jack plug into a vehicle’s ready-wired connector, avoiding the hard wiring or grounding called out for this model. Button operation raises or lowers an A-frame trailer, while two LED lights add convenience during hookup or operation.

The 4,000-pound maximum capacity provides a clear limit for selecting the jack against trailer tongue needs. Its 7-way plug connects to a ready-wired vehicle connector, so installation follows a different workflow from direct-wired models and does not require hard wiring or grounding according to the supplied details. Button controls simplify raising and lowering, and two LED lights add illumination. The included cover and manual crank handle provide storage protection and a manual alternative; Kohree notes that prolonged nonuse or first use may require motor reactivation.

Skip it if you need more than 4,000 pounds of capacity; the Kohree 7500lbs Dual Wire jack has a higher listed rating.

Choose this Kohree for an A-frame trailer with a ready-wired 7-way connector and lifting needs within 4,000 pounds. Its plug-in workflow is convenient for that setup, with motor reactivation a noted consideration after extended storage.

Listed on Amazon as: Kohree Electric Trailer Jack 4000 lbs with 7-Way Connector, Heavy Duty

#8

8. Pafessa 3500lb A-Frame Jack

• Load Capacity: 3500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV, Trailer
• Weight: 8 kg

Best for: Extended-foot A-frame setups.

Why it ranks #8: The 3,500-pound model provides 18 inches of travel, a footpad adding 4.5 inches, an LED light, and a weather-resistant cover.

An 18-inch travel range plus a footpad adding 4.5 inches gives the Pafessa jack extra vertical adjustment for A-frame trailer setups. Its 3,500-pound capacity and fit for 2.25-inch mounting holes on most A-frame trailers and RVs make the listed operating range and mounting dimensions central to choosing it.

The 3,500-pound lift capacity defines the tongue-load range this jack is specified to handle. Its 18 inches of travel and adjustable 6-inch footpad with 4.5-inch extension add useful vertical reach for varied hitch heights and ground conditions. A 7-foot power cord with positive and negative wires supports direct grounding, although wire terminals are not included. The included mounting hardware and weather-resistant cover support installation and storage; an emergency crank socket is supplied, but its driver handle is not.

Skip it if you need a supplied emergency-crank driver handle; this package lists the socket but not its handle.

This Pafessa fits A-frame owners whose 3,500-pound rating and added footpad extension meet their needs. Check the 2.25-inch mounting-hole fit and arrange a driver handle if you want to use the emergency crank socket.

Listed on Amazon as: 12V Electric Tongue Jack 3500lb A-Frame Heavy Duty Trailer Jack 18” Travel Add 4.5” with The Drop Foot & LED Light for Travel Trailer Camper,Protective Cover Included

#9

9. VEVOR 4000lb Electric Jack

• Load Capacity: 4000 lb
• Material: Carbon Steel
• Compatible with Vehicle Type: Trailer
• Weight: 9.8 kg

Best for: Covered 4,000-pound lifting.

Why it ranks #9: Its 4,000-pound capacity, carbon-steel construction, included crank, and waterproof cover suit buyers seeking a straightforward electric setup.

A supplied waterproof sunshade cover pairs with the VEVOR jack’s 4,000-pound capacity, giving trailer owners lifting support plus a cover for outdoor storage. Its carbon-steel body has a protective coating, a useful combination for buyers who want a conventional powered jack with specified weather-conscious construction.

The 4,000-pound lifting capacity makes this a fit for buyers whose trailer tongue lifting needs fall within that rating. Carbon steel with a protective coating is specified for durability and resistance to splashes and tough outdoor conditions, while the included waterproof sunshade cover adds a separate layer of protection when the jack is not in use. The supplied crank handle offers a manual option. Its listed 9.8-kilogram weight is relevant when handling the unit during installation.

Skip it if you need more than 4,000 pounds of lifting capacity; the Kohree 7500lbs Dual Wire jack has a higher listed rating.

This VEVOR suits owners of compatible trailers seeking a 4,000-pound jack with a supplied cover and crank. Keep its capacity limit in view, and consider the listed unit weight when planning installation or handling.

Listed on Amazon as: VEVOR Electric Trailer Jack, Power Tongue Jack Weight Capacity 4000 lbs, 9.84"-33.85" Electric Tongue Jack with Waterproof Cover for Lifting RV Trailer, Horse Trailer, Utility Trailer, Yacht Trailer

#10

10. RVshark 5500lb A-Frame Jack

• Load Capacity: 5500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: RV

Best for: Extra-capacity RV lifting.

Why it ranks #10: Although its listed 5,500-pound capacity is substantial, the title does not clearly identify it as an electric jack, making power fit less certain.

A 5,500-pound rating gives the RVshark A-frame jack 500 pounds more stated capacity than the 5,000-pound market limit cited in its feature description. Alloy-steel construction, galvanized tubes, reinforced inner gear, and a sturdy foot plate support its claim of added strength for RV, horse-trailer, or utility-trailer use.

The 5,500-pound capacity provides an extra 500 pounds over the 5,000-pound benchmark stated in the product description, offering a larger listed margin for buyers whose load needs fall within its rating. Alloy steel, galvanized tubes, reinforced inner gear, and a sturdy foot plate are specified construction details supporting strength and stability. The description identifies power and manual lifting modes, giving users two operating approaches. Its stated compatible vehicle type is RV, so buyers with other trailer types should assess that listed compatibility carefully.

Skip it if you need compatibility explicitly specified beyond RV; the Husky HB4500 lists trailer compatibility in its specifications.

This RVshark suits RV owners seeking the listed 5,500-pound capacity and both powered and manual lifting modes. The product description also names horse and utility trailers, but its specifications list RV compatibility, so account for that distinction.

Listed on Amazon as: 5500 lbs A-Frame Trailer Jack, Heavy Duty Trailer Tongue Jack