Best Pool Backwash Hose for Pool Filter Cleaning and Drainage

#1 · Best Overall

1. Poolvio 1.5-Inch 100-Foot Hose

• Dimensions: 1200"L x 1.5"W
• Weight: 11.4 lb
• Material: PVC
• Material Type: PVC

Best for: High-pressure 100-foot reach.

Why it ranks #1: Its 1.5-inch diameter and 100-foot length suit long pool discharge runs; reinforced 1.2mm PVC is rated up to 130 PSI, and two thumb-screw clamps are included.

Poolvio rates this 11⁄2-inch hose for up to 130 PSI and pairs that pressure specification with a 1.2 mm reinforced PVC wall and circular-woven polyester fiber. Its 100-foot lay-flat length offers extended discharge routing, and two stainless steel thumb-tightening clamps allow hand-secured connections without tools.

The 11⁄2-inch diameter targets compatible pool-filter outlets, while 100 feet of hose provides substantial distance for directing backwash discharge. Poolvio specifies a 130 PSI pressure rating and reinforced PVC with a 1.2 mm wall, features relevant to high-pressure backwashing. Circular-woven polyester fiber adds reinforcement, and the two stainless steel thumb-screw clamps can be tightened by hand on sand filters, sump pumps, or water outlets. The long hose is a better match for extended routes than compact poolside layouts.

Skip it if you only need 50 feet; Poolvio’s 11⁄2-inch x 50-foot hose offers the same listed diameter in a shorter length.

Pool owners with a compatible 11⁄2-inch outlet and an extended discharge route can consider this Poolvio. Its 130 PSI rating and hand-tightened clamps are useful specifications, while the 100-foot length may exceed compact setups.

Listed on Amazon as: Backwash Hose 1-1/2" x 100 ft, Heavy-Duty Lay-Flat Reinforced PVC Discharge Hose with 2 Stainless Steel Thumb Screw Clamps, Leak-Resistant for Inground & Above-Ground Pool Filters

#2 · Thick-Wall Option

2. Sepetrel 1.5-Inch 100-Foot Hose

• Dimensions: 1.5"W
• Material: Composite
• Material Type: Composite

Best for: Reinforced 11⁄2-inch long reach.

Why it ranks #2: This 1.5-inch, 100-foot hose lists 1.2mm walls and a three-layer reinforced construction; its stated 25 PSI working pressure suits buyers comparing pressure limits.

A 1.2 mm wall and circular-woven, high-tensile polyester reinforcement distinguish this 100-foot Sepetrel hose for pressure-focused discharge work. Its 11⁄2-inch diameter targets compatible pool setups, and the listed three-layer construction plus included clamps support a sturdy hose-and-connection arrangement for filter drainage or sump-pump use.

The 100-foot length gives discharge water more routing distance, while the 11⁄2-inch diameter suits installations using that hose size. Sepetrel specifies a 1.2 mm wall and a three-layer reinforced construction with circular-weave polyester fiber, features intended to resist wear and tearing during residential pool use. A metal clamp is included for securing the connection. The listed working pressure is 25 PSI, with a 75 PSI burst threshold, useful figures to consider against the operating demands of your setup.

Skip it if you need a 90 PSI working-pressure rating; DAVCO’s 1.5-inch x 50-foot hose lists 90 PSI.

This Sepetrel suits pool owners who need a reinforced 11⁄2-inch hose with 100 feet of reach for filter drainage or sump-pump discharge. The stated 25 PSI working pressure is an important boundary when matching it to a pump.

Listed on Amazon as: Pool Backwash Hose 1.5 Inch x 100 Feet | Heavy Duty Burst Resistant & Weatherproo Lay Flat Discharge Hose for Pool Sand Filter, Sump Pump, Inground & Above Ground Pools,Includes 2 Clamps

#3 · Flexible Diameter Choice

3. Poolmaster 50-Foot Backwash Hose

• Dimensions: 600"L x 1.5"W
• Weight: 3.8 lb
• Material: Constructed with Durable Materials
• Material Type: Constructed with Durable Materials

Best for: Flexible pool draining hose.

Why it ranks #3: The 50-foot lay-flat hose is offered in 1.5-inch or 2-inch diameter depending on supply and includes a stainless steel clamp for filter backwashing.

Flexible, weather-resistant vinyl gives the Poolmaster 32170 a useful balance for backwashing and pool draining: it can be handled for discharge work without the rigidity of pipe. The 50-foot lay-flat hose includes a stainless steel clamp, and its listed diameter is available as either 11⁄2 or 2 inches depending on supply.

Poolmaster lists the hose for filter backwashing, pool draining, lowering water levels, and directing wastewater away from pool areas, making it a versatile discharge option. Its flexible, extra-strength vinyl supports easier handling, while the lay-flat construction suits storage between jobs. A stainless steel clamp is included to secure the hose to the filter, but the supplied facts say a flat-head screwdriver is needed and sold separately, so connection is not a tool-free process.

Skip it if you want hand-tightened clamps without a tool; Poolvio’s 11⁄2-inch x 50-foot hose includes thumb-screw clamps.

Pool owners who need a flexible 50-foot hose for backwashing or lowering water levels can consider the Poolmaster. Its diameter varies by supply, and attaching the clamp requires a separate flat-head screwdriver.

Listed on Amazon as: Poolmaster 32170 Heavy Duty Pool Backwash Hose 50 Ft x 1.5" or 2" Diameter, Lay Flat Discharge Hose with Clamp for Pool Draining, Filter Backwashing, Above Ground and Inground Pools

#4 · Fitted Connection

4. DAVCO 1.5-Inch 50-Foot Hose

• Dimensions: 600"L x 2.6"W
• Weight: 3.34 kg
• Material: Polyester, Polyvinyl Chloride (PVC)
• Material Type: Polyester, Polyvinyl Chloride (PVC)

Best for: Pin-lug fitting connections.

Why it ranks #4: Its 1.5-inch size and 50-foot length fit common backwash runs, while aluminum male and female pin-lug fittings and a stated 90 PSI working pressure are specified.

Aluminum male and female pin-lug fittings are the DAVCO hose’s defining feature, providing a direct connection option for compatible 11⁄2-inch valve ports. Its 50-foot reinforced PVC-and-polyester lay-flat hose is listed for a 90 PSI working pressure, while stainless steel clamps secure the fittings to the hose.

The 11⁄2-inch male and female aluminum connectors target matching valve ports, giving buyers a defined connection style to check before setup. At 50 feet, the hose supports pool draining and filter backwashing without requiring a longer discharge run. DAVCO describes an extruded PVC hose reinforced with polyester yarn, and stainless steel clamps fix the pin-lug fittings. The stated 90 PSI working pressure is a useful operating specification, but this connection approach suits installations that use compatible pin-lug ports.

Skip it if you need tool-free thumb-screw connections; Poolvio’s 11⁄2-inch x 50-foot hose includes hand-tightened stainless steel clamps.

DAVCO suits pool owners whose 11⁄2-inch valve ports accept pin-lug fittings and who need a 50-foot backwash or drain hose. Check connection style as well as diameter before choosing this fitting-equipped model.

Listed on Amazon as: DAVCO 1.5" ID × 50 ft Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Lay Flat Water Discharge Pump Hoses For Swimming Drain Pools and Clean Filters, With Aluminum Pin Lug Fittings

#5

5. Poolvio 1.5-Inch 50-Foot Hose

• Dimensions: 600"L x 1.5"W
• Weight: 3.2 lb
• Material: Polyvinyl Chloride (PVC)
• Material Type: Polyvinyl Chloride (PVC)

Best for: Hand-tightened filter connections.

Why it ranks #5: This 50-foot, 1.5-inch PVC hose includes two stainless steel thumb-screw clamps and lists a 0.54mm wall thickness for pool filter discharge.

Two stainless steel thumb-screw clamps are the practical differentiator: they let you secure this 11⁄2-inch Poolvio hose to a sand filter or pump outlet by hand. Its 50-foot lay-flat length supports routing discharge away from the pool, while the 0.54 mm PVC wall is specified for high-pressure backwashing.

The 11⁄2-inch diameter targets compatible filter and pump outlets, and the two included stainless steel clamps are intended to make a watertight connection without tools. At 50 feet, the hose offers substantial reach for directing backwash water away from the pool area. Thick PVC with a stated 0.54 mm wall and burst-proof construction addresses pressure during backwashing; the lay-flat form also makes this discharge hose easier to put away than a rigid pipe.

Skip it if you need a 2-inch hose for your outlet; NUDAOS 2-inch x 100-foot hose is listed for 2-inch fittings.

Pool owners with a compatible 11⁄2-inch outlet who want a 50-foot lay-flat hose and hand-tightened clamps should consider this model. Its diameter is the key fit boundary, so check the outlet size before choosing it.

Listed on Amazon as: Backwash Hose 1-1/2" x 50 ft, Blue Lay-Flat PVC Discharge Hose with 2 Stainless Steel Thumb Screw Clamps, Leak-Free for Swimming Pool Filter Cleaning, Flooded Area, Pond Draining

#6

6. YASHINE 1.5-Inch 50-Foot Hose

• Dimensions: 600"L x 1.5"W
• Weight: 1.08 kg
• Material: Polyvinyl Chloride (PVC)
• Material Type: Polyvinyl Chloride (PVC)

Best for: 50-foot 11⁄2-inch pump hose.

Why it ranks #6: Its 1.5-inch diameter and 50-foot length suit a standard-size discharge run, and the listing specifies PVC construction and a connector for pump connection.

The YASHINE hose combines a 11⁄2-inch diameter with 50 feet of lay-flat PVC discharge length, a useful match for compatible pool-filter outlets and moderate routing needs. Its listed connector supports pump connection and storage, while reinforced construction is described as resistant to pressure, weather, chemicals, aging, and wear.

For a setup using a 11⁄2-inch outlet, the listed diameter gives a clear starting point for checking compatibility, and 50 feet offers substantial routing length for pool draining or filter cleaning. The lay-flat PVC form supports storage, while the included connector is described as helping with pump connection and storage. YASHINE also lists use with sump and trash pumps and describes the hose as reinforced to withstand pressure and environmental exposure, extending its usefulness beyond pool backwashing.

Skip it if you have a 2-inch outlet; YASHINE’s 2-inch x 100-foot hose matches that listed diameter and offers more reach.

This YASHINE suits pool owners with a 11⁄2-inch outlet who want 50 feet of lay-flat hose for filter cleaning or pump discharge. Its diameter and route length are the main fit considerations.

Listed on Amazon as: PVC HOSE 1-1/2"50ft, Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Discharge Hose Lay Flat Water, For Swimming Drain Pools and Clean Filters, with 2 Clamp

#7 · Shortest Run

7. NEAGLORY 1.5-Inch 20-Foot Hose

• Dimensions: 240"L x 1.5"W
• Weight: 1.34 kg
• Material: Polyvinyl Chloride (PVC)
• Material Type: Polyvinyl Chloride (PVC)

Best for: Compact 20-foot pool hose.

Why it ranks #7: At 20 feet, this 1.5-inch reinforced PVC hose suits a compact discharge route; its listing describes weather-, chemical-, and wear-resistant construction and includes clamps.

At 20 feet long, the NEAGLORY hose offers a compact discharge run for pool owners who do not need a lengthy route. Its 11⁄2-inch size and flexible PVC reinforced with high-tensile polyester yarn suit compatible pump or filter connections, while the listed resistance properties address demanding drainage use.

The 11⁄2-inch diameter targets setups with a matching outlet, and the included clamps provide connection hardware. Its 20-foot length can suit a nearby discharge point without the extra hose of longer options. NEAGLORY describes flexible PVC reinforced with continuously woven, high-tensile polyester yarn, supporting handling while adding reinforcement. The listed resistance to pressure, weather, chemicals, aging, and wear also aligns with pool-filter wastewater and pump-drainage tasks; measure the route to ensure 20 feet reaches the discharge location.

Skip it if you need a longer route; Poolvio’s 11⁄2-inch x 50-foot hose provides 30 additional feet of listed length.

This NEAGLORY hose fits pool owners with a compatible 11⁄2-inch outlet and a short discharge path, such as nearby pump drainage. Its 20-foot length is the key boundary, so measure the route before selecting it.

Listed on Amazon as: Pool Backwash Hose with Clamps, 1.5"x20' PVC Discharge Drain Hoses for Pump

#8

8. Jin&Bao 2-Inch 25-Foot Hose

• Dimensions: 300"L x 2"W
• Weight: 3.8 lb
• Material: Polyvinyl Chloride (PVC)
• Material Type: Polyvinyl Chloride (PVC)

Best for: Short reinforced 2-inch runs.

Why it ranks #8: The 2-inch, 25-foot hose is a shorter option for compatible outlets; its listing says it fits a 2-inch or smaller outlet and includes two clamps.

A 25-foot length and 2-inch inside diameter make the Jin&Bao a focused option for shorter discharge routes using compatible larger fittings. Its listed fit includes 2-inch or smaller filter outlets, cam locks, and pin-lug fittings, as well as 11⁄2-inch PVC pipe, while two clamps support securing the hose.

Jin&Bao specifies a 2-inch inside diameter and a 25-foot length, useful for matching compatible connections and limiting excess hose on a nearby discharge run. The listed fit includes 2-inch or smaller filter outlets, cam locks, pin-lug fittings, and 11⁄2-inch PVC pipe. PVC reinforced with polyester yarn is intended to address durability concerns, and the two included clamps provide connection hardware. The shorter length is practical for compact layouts but requires measuring the route before purchase.

Skip it if you need a longer run; NUDAOS offers a 2-inch x 100-foot hose for compatible 2-inch fittings.

Choose the Jin&Bao for a compact 2-inch discharge setup when its listed fitting compatibility matches your outlet. Pool owners routing water farther than 25 feet should account for the hose’s limited reach.

Listed on Amazon as: Jin&Bao 2" x 25 FT Pool Backwash Hose, Heavy Duty Reinforced Lay-Flat Discharge Hose, Burst Resistant Drain Hose with 2 Clamps, for Pool Filter & Sump Pump-Blue

#9

9. YASHINE 2-Inch 100-Foot Hose

• Dimensions: 1200"L x 2"W
• Material: Polyvinyl Chloride (PVC)
• Material Type: Polyvinyl Chloride (PVC)

Best for: Long 2-inch pump discharge.

Why it ranks #9: This 2-inch by 100-foot PVC discharge hose serves buyers needing a long run and larger diameter; the listing includes two clamps and describes reinforced construction.

The YASHINE hose pairs a 2-inch size with 100 feet of length, giving compatible pool or pump outlets a long route for discharge. Its reinforced PVC is described as resistant to pressure, weather, chemicals, aging, and wear, and the included connector supports pump connection and storage.

A 2-inch diameter and 100-foot length make this hose a fit to consider for larger compatible outlets and discharge paths that need extra reach. YASHINE lists use for pool draining, filter cleaning, sump pumps, and trash pumps, so the hose can serve beyond routine backwashing. Reinforced PVC is described as handling pressure and exposure to weather, chemicals, aging, and wear. The supplied details also mention a connector for pump connection and storage, simplifying handling between tasks.

Skip it if you need a 11⁄2-inch hose; YASHINE’s 11⁄2-inch x 50-foot hose has the smaller listed diameter.

Pool owners with compatible 2-inch outlets who need a 100-foot hose for filter cleaning, draining, or pump discharge may find this a practical match. Confirm that the outlet size suits its 2-inch diameter.

Listed on Amazon as: PVC Drain HOSE 2"100ft, Pool Backwash Hose, Heavy Duty Reinforced Blue PVC Discharge Hose Lay Flat Water, For Swimming Drain Pools and Clean Filters, with 2 Clamp

#10

10. NUDAOS 2-Inch 100-Foot Hose

• Dimensions: 1200"L x 2"W
• Weight: 5.98 kg
• Material: Polyvinyl Chloride (PVC)
• Material Type: Polyvinyl Chloride (PVC)

Best for: Long-run 2-inch discharge.

Why it ranks #10: Its 2-inch diameter and 100-foot length cover extended discharge routes, with a stated 90 PSI working pressure and temperature range of 25°F to 150°F.

A 100-foot length paired with a 2-inch inside diameter makes the NUDAOS hose suited to long discharge routes that use 2-inch fittings. Its listed 90 PSI working pressure and PVC construction support water-transfer tasks, while two included clamps provide connection hardware for pool-filter waste or other discharge uses.

The 2-inch inside diameter is specified to fit 2-inch hose fittings, helping buyers match the hose to a compatible outlet before setup. At 100 feet, it can carry discharge farther from a pool or pump than a short service hose. NUDAOS lists a 90 PSI working pressure and a temperature range of 25°F to 150°F, while its features describe resistance to weather, chemicals, aging, and wear for varied water-transfer work.

Skip it if you have a 11⁄2-inch filter outlet; DAVCO’s 1.5-inch hose includes matching male and female pin-lug fittings.

Choose this NUDAOS hose when a compatible 2-inch fitting and long discharge route are priorities, including pool-filter or sump-pump use. Its 100-foot length and 2-inch size may not suit compact setups or smaller outlets.

Listed on Amazon as: 2" x100 FT, Pool Backwash Hose, Heavy-Duty PVC Hose, Lay Flat Discharge Hose, Weatherproof Burst Resistant for Water Transfer, Sump Pump, Pool Filter, Pool Drain,with 2 Clamps