Best Motorcycle Scissor Jack for Home Maintenance

#1 · Best Overall

1. OMT Wide Deck Jack

• Load Capacity: 1100 lb.
• Material: Rubber, Steel
• Weight: 12.8 kg
• Compatible with Vehicle Type: Motorcycle

Best for: Cruiser maintenance with included tools.

Why it ranks #1: Its 1,100-pound capacity and 3.7-to-14.6-inch lift suit common maintenance, while the included safety bar, T-handle, socket, gloves, and chain brush add utility.

A 1,100-pound rating paired with a 3.7-to-14.6-inch lift range lets this Orion Motor Tech jack support cruisers and dirt bikes through varied maintenance tasks. Its wide deck gives a broad platform, while the ready-to-use package includes a T-handle, socket, safety bar, gloves, and chain brush.

Choose between the T-handle and a 3/8-inch socket with ratchet, so the lifting method can suit your workspace and available tools. The 3.7-inch minimum height gives the jack a low starting point, and its 14.6-inch maximum provides adjustment for repair access. The included safety bar and rubber-and-steel construction add practical support, while the chain brush and gloves round out the supplied maintenance kit. The manufacturer recommends manual operation to limit screw wear.

Skip it if you need powered lifting; the manual-only recommendation rules out powered operation, while VEVOR’s 350 LBS Hydraulic Motorcycle Lift uses a foot pedal.

Cruiser and dirt-bike owners needing an included-tool center lift can make use of its broad height range and 1,100-pound rating. The manual-operation recommendation matters if your workflow depends on powered lifting.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand

#2 · Best Adjustable Balance

2. VIVOHOME VH012 Lift

• Load Capacity: 1100 lb
• Material: Alloy Steel
• Weight: 12.5 kg
• Compatible with Vehicle Type: Motorcycle, Snowmobile

Best for: Uneven-floor bike and ATV lifting.

Why it ranks #2: This steel jack supports 1,100 pounds and lifts from 3.5 to 14.5 inches; adjustable screw adapters help balance it on uneven floors.

Adjustable screw adapters are the key feature here: they help balance the VIVOHOME lift on uneven floors while it supports motorcycles or ATVs up to 1,100 pounds. The heavy-duty alloy-steel scissor jack raises from 3.5 to 14.5 inches, providing a broad adjustment window for service access.

The adjustable screw adapters address uneven-floor positioning, helping buyers set the lift for a more balanced support point where the floor is not level. A reinforced crank handle operates the scissor mechanism, and the 3.5-to-14.5-inch range lets you choose a working height for engine, transmission, or wheel maintenance. Its 1,100-pound capacity and stated motorcycle-and-snowmobile compatibility make it relevant beyond basic motorcycle servicing, including ATV use in the supplied product facts.

Skip it if you need a lift above 14.5 inches; Black Widow’s MC-JACK reaches 16.25 inches with its removable adapters.

Motorcycle or ATV owners working on uneven floors can benefit from the adjustable screw adapters and crank-operated height control. Its 14.5-inch ceiling is the relevant boundary when planning a higher-clearance service setup.

Listed on Amazon as: VIVOHOME 1100 LBS Motorcycle Lift Scissor Jack, Wide Deck Hoist Stand, Red

#3 · Highest Lift

3. Black Widow Tire Jack

• Load Capacity: 1100 lb
• Material: Steel
• Weight: 32 lb
• Compatible with Vehicle Type: off-road-motorcycles…

Best for: Higher-clearance tire service.

Why it ranks #3: Its 1,100-pound capacity and 3.75-to-16.25-inch range offer the tallest listed lift, with removable adapters adding 2 to 3.25 inches.

A 16.25-inch maximum lift, including removable height adapters, gives this Black Widow jack extra reach for front- or rear-tire work on many motorcycles. Its 1,100-pound capacity and rubber-padded lifting surfaces pair useful support strength with a contact surface intended to resist slipping.

The lift adjusts from 3.75 to 16.25 inches, and the removable adapters add 2 to 3.25 inches of height when extra reach is needed. That adjustability can help tailor support height to a tire-service task rather than locking the buyer into one working level. Heavy-duty steel construction and a powder-coated finish support durability, while the rubber-padded lifting surfaces help keep the motorcycle from slipping during positioning.

Skip it if you need a lighter jack to move between work areas; Orion Motor Tech’s OMT-MML-ZX09-08 weighs 12.8 kg and includes a carrying-oriented tool kit.

Motorcycle owners who need extra lift height for tire work can use the removable adapters to extend this steel jack’s reach. Its 32-pound weight is worth considering if frequent repositioning is part of your routine.

Listed on Amazon as: Black Widow Steel Motorcycle Tire Jack, 3.75 to 16.25 In Lift, 1,100 lb

#4

4. OMT Motorcycle Lift

• Load Capacity: 1100 lb
• Material: 1045 Carbon Steel, CR-V, Plastic, Rubber
• Weight: 28.4 lb
• Compatible with Vehicle Type: Dirt Bike Touring Cruiser

Best for: Tool-ready touring bike maintenance.

Why it ranks #4: It has a 1,100-pound rating and 3.7-to-14.6-inch range, plus a safety bar, T-handle, socket, gloves, and chain brush.

A 1,100-pound capacity and lifting range from 3.7 to 14.6 inches give this Orion Motor Tech jack room to support maintenance on dirt bikes, touring bikes, and cruisers. Its T-handle and included 3/8-inch socket provide two manual ways to raise the stand without sourcing a socket separately.

Use the T-handle for hand operation or the included 3/8-inch socket with a ratchet when that setup better suits the work area. The 3.7-inch starting height and 14.6-inch maximum let you adjust the bike’s support height for different repair tasks. The package also supplies a safety bar, gloves, and chain brush, so several useful maintenance accessories arrive with the jack. Orion Motor Tech recommends manual operation to help extend screw life and prevent wear.

Skip it if you want a foot-pedal hydraulic lift reaching 36 inches; VEVOR’s Hydraulic Motorcycle Lift Table offers that range for off-road motorcycles.

Touring, cruiser, and dirt-bike owners seeking a manually operated center jack will value the included socket and adjustable lift range. Choose another lift if your work requires hydraulic foot-pedal operation or a much taller platform.

Listed on Amazon as: OMT Motorcycle Lift, 1100lb Scissor Jack Stand for ATV Dirt Bike Cruiser

#5 · Safety-Pin Design

5. VIVOHOME VH326 Lift

• Load Capacity: 1100 lbs
• Material: Carbon Steel
• Weight: 30 lb
• Compatible with Vehicle Type: ATV, Motorcycle, Snowmobile, UTV

Best for: Stable center lift with easy-clean finish.

Why it ranks #5: This 1,100-pound center scissor lift includes safety pins and side wings; its rubber top pad and listed ATV, motorcycle, and UTV compatibility are useful.

Three-inch wings on each side of the base strengthen this VIVOHOME stand’s stability, while its striped rubber top pad helps prevent slipping at the motorcycle contact point. The 1,100-pound center scissor jack uses a red-and-black powder-coated finish that resists oil, grease, and rust for easier cleanup after repairs.

The widened base wings support stability as you position a motorcycle, while the striped rubber top surface helps reduce slipping at the lift contact. Its powder-coated finish resists oil, grease, and rust, so routine post-repair cleanup is more straightforward. The 1,100-pound capacity and stated compatibility with ATVs, motorcycles, snowmobiles, and UTVs extend its potential vehicle uses. The supplied information does not state a lifting-height range, which limits height planning from these details.

Skip it if you need to plan around a stated height range; VIVOHOME’s VH012 lists adjustment from 3.5 to 14.5 inches.

Owners seeking a 1,100-pound center jack with a widened base and easy-clean coating can consider this VIVOHOME model. Its supplied details name several vehicle types but omit the lift-height range, an important planning boundary.

Listed on Amazon as: VIVOHOME Motorcycle Lift 1100 LBS Center Scissor Lift Jack

#6

6. VEVOR 1100 lb Lift

• Load Capacity: 1100 lb
• Material: Q235B
• Weight: 29.3 lb
• Compatible with Vehicle Type: Motorcycle

Best for: Lock-pin support for street and touring bikes.

Why it ranks #6: A reinforced steel scissor structure supports 1,100 pounds, with a 3.74-to-13.38-inch range, lock pin, and included hex socket wrench.

A lock pin paired with a reinforced scissor structure gives this VEVOR jack a defined support feature for street bikes, cruisers, and adventure touring motorcycles. Its 1,100-pound rating and 3.74-to-13.38-inch range cover routine lifting needs, while the included 22 mm hex socket wrench is ready for height adjustment.

The included 22 mm hex socket wrench operates the jack, avoiding a need to source that specific tool before adjusting height. Its 3.74-inch minimum provides a low starting point, while the 13.38-inch maximum sets the available service clearance. A reinforced scissor structure distributes weight evenly, and the lock pin adds a specified securing feature. At 1,100 pounds, it suits the listed street, cruiser, and adventure-touring motorcycle categories within its capacity.

Skip it if you need more than 13.38 inches of lift; Black Widow’s MC-JACK reaches 16.25 inches with its removable adapters.

Street-bike, cruiser, and adventure-touring owners seeking a lock-pin scissor jack can use the included wrench to set its height. Check that the 13.38-inch maximum provides enough clearance for your planned service.

Listed on Amazon as: VEVOR Motorcycle Lift, 1100 lbs Motorcycle Scissor Lift Jack with Wide Deck & Lock Pin, 3.74"-13.38" Center Hoist Crank Stand, Steel Scissor Jack for Street Bikes, Cruiser Bikes, Touring, Blue/Black

#7

7. Extreme Max Wide Jack

• Load Capacity: 1000 lb
• Material: Alloy Steel
• Weight: 12.39 kg
• Compatible with Vehicle Type: Motorcycle

Best for: Wide-platform manual motorcycle lifting.

Why it ranks #7: Its wide 15-1/8-by-9-inch platform has rubber padding, and the manual steel jack reaches 14 inches; listed capacity is 1,000 pounds.

A 15-1/8-by-9-inch platform gives this Extreme Max jack a broad contact area for center lifting a motorcycle. The rubber padding helps protect the bike from scratching, and the steel scissor frame extends to 14 inches for maintenance or cleaning. Its listed capacity is 1,000 pounds, and it will not lift trikes.

The wide platform spreads the contact area beneath the motorcycle, while rubber padding helps prevent scratching during positioning. A manual 7/8-inch worm drive raises the jack to 14 inches, allowing owners to set a practical working height for maintenance or cleaning. Operation requires a separately sourced 7/8-inch socket or wrench, and the instructions specifically prohibit an impact wrench or powered drill. The 1,000-pound rating and explicit trike exclusion define its load and vehicle boundaries.

Skip it if you service a trike; VEVOR’s Hydraulic Motorcycle Lift Table lists ATV compatibility, though its capacity is 350 pounds.

Motorcycle owners who want a wide, padded center-lift platform for cleaning or maintenance can use this manual steel jack. It is not suitable for trikes, and powered drills or impact wrenches are prohibited.

Listed on Amazon as: Extreme Max 5001.5044 1100 lb. Motorcycle Scissors Jack – Wide

#8

8. SOARSHARK Aluminum Lift

• Load Capacity: 1100 lb
• Material: Aluminum, Carbon Steel
• Weight: 16 lb
• Compatible with Vehicle Type: ATV, Motorcycle, Snowmobile, UTV

Best for: Lighter aluminum-alloy motorcycle lifting.

Why it ranks #8: It combines a 1,100-pound capacity with aluminum and carbon steel construction, reinforced scissor shafts, and an included socket and T-handle.

Aluminum-alloy construction keeps this SOARSHARK scissor jack’s listed weight to 16 pounds while retaining a 1,100-pound capacity. Its reinforced structure uses two extra shafts and deep-step shaft design for clamping force, addressing movement during maintenance while keeping the jack easier to carry than heavier steel options.

The aluminum and carbon-steel construction combines a lighter 16-pound listed weight with a 1,100-pound capacity, which may suit owners who need to reposition a jack between tasks. Two extra reinforcing shafts secure the four scissor arms, while the deep-step shaft design increases clamping force to help limit movement during service. The included T-handle and 3/8-inch drive socket provide manual operating options, and a chain brush is also supplied.

Skip it if you need a specified lift-height range before choosing; Orion Motor Tech’s OMT-MML-ZX09-08 lists adjustment from 3.7 to 14.6 inches.

Motorcycle owners who prioritize a lighter jack and reinforced arm support can consider this 16-pound model. The supplied details do not give a lift-height range, so buyers needing a known working height should factor that limitation in.

Listed on Amazon as: Aluminum Motorcycle Scissor Lift Jack, 1100LBS Heavy Duty (Black)

#9

9. VEVOR Hydraulic Lift Table

• Load Capacity: 350 lb
• Material: Steel
• Weight: 63 lb
• Compatible with Vehicle Type: ATV, Dirt Bikes

Best for: Foot-pedal off-road bike lifting.

Why it ranks #9: This wheeled, foot-operated table reaches 36 inches, but its 350-pound capacity and ATV or dirt-bike compatibility make it less suitable for heavier motorcycles.

Foot-pedal hydraulic lifting takes the repeated hand-cranking out of raising this VEVOR table, which supports off-road motorcycles up to 350 pounds. Its 13.8-to-36-inch height range provides a much taller working position than a low-profile center jack, and four wheels make it a movable shop-style option.

Pressing the foot pedal raises the platform, a workflow that can reduce bending while bringing an off-road motorcycle to a working height. The 13.8-to-36-inch range offers room to choose a substantially elevated position, and the four wheels support moving the table around the work area. A steel scissor structure and worm gear transmission support the lifting setup; the stated 350-pound capacity makes load suitability a key selection boundary.

Skip it if you service a motorcycle heavier than 350 pounds; VEVOR’s JL-M01101 motorcycle scissor lift supports up to 1,100 pounds.

Off-road bike owners who want foot-pedal operation and a raised worktable position should consider this wheeled hydraulic lift. Its 350-pound capacity makes it unsuitable for loads beyond that stated limit.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Table, 350 lbs Capacity Motorcycle Scissor Jack Lift with Wide Deck, J-Hooks, 4 Wheels, Hydraulic Foot-Operated Jack Stand for ATV Dirt Bikes

#10

10. SHMQYSY Center Stand

• Load Capacity: 1500 lb
• Material: Carbon Steel
• Weight: 34.2 lb
• Compatible with Vehicle Type: Motorcycle

Best for: Heavy motorcycle support with carrying handle.

Why it ranks #10: Although it lists a 1,500-pound capacity and thick rubber pads, its floor-stand design is not identified as a scissor jack, making it a less direct match.

A 1,500-pound capacity sets this SHMQYSY floor stand apart for owners seeking support for a heavy motorcycle. Its upgraded bearing is intended to reduce friction during lifting, while the 0.48-inch top rubber pad cushions the contact point and the anti-slip bottom helps protect the floor.

The upgraded bearing is specified to reduce friction and the effort needed to raise heavy motorcycles, so the lifting motion is the central workflow benefit. A 0.48-inch-thick top rubber pad helps protect the motorcycle from scratches, while bottom anti-slip rubber pads protect the ground and help keep the stand positioned. The carrying handle supports moving the 34.2-pound carbon-steel stand around the garage. Its listed vehicle compatibility is motorcycle.

Skip it if you need a jack explicitly listed for ATV use; VEVOR’s Hydraulic Motorcycle Lift Table lists both ATVs and dirt bikes.

Owners of heavy motorcycles seeking a bearing-assisted floor stand can benefit from its high stated capacity, protective pads, and carrying handle. The supplied compatibility information names motorcycles, so other vehicle types fall outside its listed fit.

Listed on Amazon as: 1500 LBS Motorcycle Jack, Thickened 0.48" Rubber Pad Motorcycle Stand Lift, Upgraded Labor-Saving Bearing, Steel Motorcycle Center Stand with Carrying Handle and Anti-Slip Bottom for Heavy ATV