Best Lift For 4Runner: Suspension and Leveling Kits Compared

#1 · Best Overall

1. Rough Country 3-Inch Lift Kit

• Weight: 29.7 lb
• Material: Alloy Steel, Aluminum, Nylon
• Material Type: Alloy Steel, Aluminum, Nylon

Best for: Fifth-gen stance and tire room.

Why it ranks #1: Its 2010–2024 fitment, 3-inch lift, N3 rear shocks, and stated clearance for tires up to 33 inches make it a well-equipped newer-generation option.

A three-inch lift that levels the factory rake and lists clearance for tires up to 33 inches gives 2010–2024 4Runner owners a clear stance-and-tire objective. Rough Country also specifies N3 rear shocks and a factory-like ride target, linking the height change to everyday use as well as trail clearance.

The kit combines strut spacers, coil spring spacers, hardware, and two Premium N3 shock absorbers, with the rear shocks providing a specified suspension upgrade alongside the lift. Raising the front to match the rear is intended to eliminate factory rake, while the stated 33-inch tire capacity helps buyers planning larger tires. Rough Country says the kit is engineered to preserve factory-like ride quality and handling. Its listed 2010–2024 application makes it relevant to fifth-generation owners, with fitment still dependent on the vehicle configuration.

Skip it if you have a 1996–2002 4Runner; the Rough Country 77131 is listed for that earlier generation instead.

This suits 2010–2024 4Runner owners who want a leveled stance, larger-tire clearance, and included N3 rear shocks. The stated 33-inch tire capacity and vehicle configuration should guide the final fit decision.

Listed on Amazon as: Rough Country 3" Lift Kit for Toyota 4Runner (2010-2024) with N3 Rear Shocks – Levels Stance, Fits Up to 33" Tires

#2 · 35-Inch Tire Claim

2. KSP 3-Inch Full Leveling Kit

• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: 35-inch tire clearance planners.

Why it ranks #2: This 3-inch front and 2-inch rear kit fits 2003–2024 models and lists up to 35-inch tires, while warning that rubbing may occur.

A 3-inch front and 2-inch rear lift is listed for 2003–2024 4Runners, with KSP stating that tires up to 35 inches can be installed. The front spacers are heavy-duty carbon steel, and the package lists rear polyurethane coil spring spacers for a full front-and-rear leveling setup.

KSP’s front strut spacers and rear polyurethane coil spring spacers establish a 3-inch-front, 2-inch-rear arrangement for the listed 4Runner and FJ Cruiser years. The stated maximum tire size is 35 inches, but the listing cautions that rubbing may occur with extreme articulation; it also flags double-checking wheel details for 35-inch tires on factory wheels. Heavy-duty carbon steel is specified for the front lift spacers. Limited models with X-REAS and 2018-on TRD Pro models are excluded.

Skip it if you require 35-inch tires with no stated articulation caveat; the listing warns that rubbing may occur at extreme articulation.

This fits a 2003–2024 4Runner owner seeking a full 3/2 lift and considering tires up to 35 inches. Factor in the stated rubbing caveat, factory-wheel note, and exclusions for X-REAS Limited and 2018-on TRD Pro models.

Listed on Amazon as: KSP 4Runner Full Leveling Lift Kits 3"F+2"R

#3 · Differential Drop Included

3. TASTONTUP 3+2-Inch Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Front-and-rear spacer lift DIY.

Why it ranks #3: Its stated 2003–2024 fitment and 3-inch front, 2-inch rear lift include differential-drop and skid-plate-drop spacers, useful components for this setup.

A 3-inch front and 2-inch rear lift pairs front billet aluminum strut spacers with rear coil spring spacers for 2003–2024 4Runner owners seeking elevation at both ends. The package also lists differential and skid plate drop spacers, giving buyers more included chassis-related hardware than a basic spacer description.

The front strut spacers and rear coil spring spacers provide the listed 3-inch/2-inch lift arrangement, while differential drop spacers and skid plate drop spacers are also included. That component mix helps buyers plan for more than front leveling alone. The bolt-on installation is stated to take two to four hours without special tools, and an alignment is recommended after changing vehicle height. Fit excludes Limited models with X-REAS hydraulic struts and 2018-on TRD Pro models, so those restrictions matter before purchase.

Skip it if you own a Limited with X-REAS or a 2018-on TRD Pro; those 4Runner configurations are excluded.

This matches owners of listed 2003–2024 4Runners who want both ends lifted and the included differential and skid plate spacers. Plan for the stated two-to-four-hour job and a post-lift alignment.

Listed on Amazon as: Leveling Lift Kit for 2003-2024 Toyota 4Runner, 2007-2015 FJ Cruiser 2WD 4WD, 3" Front 2" Rear Full Leveling Spring Spacer Lift Kits with Differential Kit

#4 · Broad Fitment Range

4. maXpeedingrods 3+2-Inch Lift Kit

• Weight: 9.26 lb

Best for: Mixed-year spacer lift buyers.

Why it ranks #4: The listed 2003–2024 4Runner fitment and 3-inch front, 2-inch rear lift cover many model years, with clear exclusions for X-REAS and newer TRD Pro.

A 3-inch front and 2-inch rear lift targets 2003–2024 4Runner owners seeking a more commanding stance, while the listed application also covers 2007–2015 FJ Cruiser 2WD and 4WD. Its 6061 aluminum front strut spacer provides a concrete material detail for buyers comparing spacer-based kits.

The stated 3-inch front and 2-inch rear lift separates the elevation at each end, giving buyers a defined setup rather than a single front-only raise. A 6061 aluminum front strut spacer is specified, making that front component’s construction clear. Application spans 2003–2024 4Runner 2WD and 4WD, but excludes Limited models with X-REAS hydraulic struts and 2018-on TRD Pro models. The listed facts do not specify installation time or included rear hardware, so check the kit contents before planning the job.

Skip it if you have a Limited with X-REAS or a 2018-on TRD Pro; this kit excludes both configurations.

This is a candidate for 2003–2024 4Runner owners wanting a defined front-and-rear spacer lift, including 2WD applications. Its exclusions are decisive: Limited models with X-REAS and 2018-on TRD Pro models are not listed as compatible.

Listed on Amazon as: maXpeedingrods 3" Front & 2'' Rear Lift Kit for Toyota 4Runner 2003-2024

#5

5. VEVOR 3+2-Inch Leveling Kit

• Weight: 6.2 lb
• Material: Polyurethane
• Material Type: Polyurethane

Best for: 2WD and 4WD chassis leveling.

Why it ranks #5: This kit lists 2003–2022 4Runner fitment and 3-inch front, 2-inch rear lift, but excludes X-REAS models and 2018-and-newer TRD Pro.

VEVOR lists a 3-inch front and 2-inch rear lift for 2003–2022 4Runner 2WD and 4WD models, giving a broad drivetrain fit within that year range. Two bottom strut spacers and two coil spring spacers define the front-and-rear layout, while high-strength bolts are included.

The kit combines bottom strut spacers at the front with coil spring spacers at the rear, supporting the stated 3-inch/2-inch chassis lift arrangement. VEVOR notes that spacer thickness is not the actual lift height and that final lift varies, a practical caveat for planning clearance. Its application covers 2003–2022 4Runner 2WD and 4WD, plus 2007–2015 FJ Cruiser 2WD and 4WD. It excludes 2018-on TRD Pro and models with X-REAS hydraulic struts, which narrows the otherwise broad fit list.

Skip it if you have a 2023 or 2024 4Runner; the PraOents 03RN-3F-2R-222 lists coverage through 2024.

This suits 2003–2022 4Runner owners wanting a front-and-rear lift with both 2WD and 4WD listed. Check the XREAS and TRD Pro exclusions, and treat final lift height as variable rather than equal to spacer thickness.

Listed on Amazon as: VEVOR 3 Inch Front and 2 Inch Rear Leveling Lift Kit for 2003-2022 Toyota 4Runner 2WD/4WD, 2007-2015 Toyota FJ Cruiser 2WD/4WD, Chassis Level Kit with 2 Bottom Strut Spacers and 2 Coil Spring Spacers

#6

6. PraOents 3+2-Inch Leveling Kit

• Material: Alloy Steel
• Material Type: Alloy Steel

Best for: 3/2 lift for 4WD adventures.

Why it ranks #6: Its 3-inch front and 2-inch rear setup targets 2003–2024 4Runners, though the listing emphasizes 4WD and provides fewer specific included-part details.

A 3-inch front and 2-inch rear lift targets 2003–2024 4Runner owners wanting a more elevated stance for off-road use. PraOents states that spacer thickness is not the same as resulting lift height, a useful qualification when planning tire, clearance, and suspension changes around the advertised setup.

The listed front-and-rear lift provides distinct elevation figures for each end, while the product description connects the change to improved off-road performance and a commanding stance. Its explicit warning that lift height differs from spacer thickness reflects suspension geometry and helps prevent treating spacer dimensions as the final ride height. The application names 2003–2024 4Runner and 2007–2015 FJ Cruiser, but describes the kit for 4WD. The supplied details do not give installation time or a full component breakdown, so plan around that limited information.

Skip it if you need a clearly listed 2WD application; VEVOR LK-436-T specifies 4Runner 2WD and 4WD through 2022.

This is for 4WD owners seeking a front-and-rear lift and aware that spacer thickness does not equal finished lift height. Review the fitment and component details carefully, as the supplied listing gives limited installation information.

Listed on Amazon as: Leveling Lift Kit for 2003-2024 4Runner, 2007-2015 FJ Cruiser, 3 inch Front and 2 inch Rear Strut Spacers Leveling Kit

#7 · Front-Only Leveling

7. dynofit 2-Inch Leveling Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: Front-only leveling on a DIY schedule.

Why it ranks #7: This front-only 2-inch spacer kit lists 2003–2024 4Runner fitment and forged aluminum construction, suiting buyers seeking a smaller front lift.

A two-inch front lift levels the nose of 2003–2024 4Runners without adding a listed rear lift. The forged, T6-treated aircraft billet aluminum spacers and stated one-to-two-hour installation window make this a focused option for owners seeking a front stance change with a comparatively direct installation plan.

This kit raises the front suspension by a stated two inches and includes two strut spacers plus hardware, so it addresses front leveling rather than a full front-and-rear lift. The listing says installation takes one to two hours and requires no special tools, making the job scope clearer for home installers. Forged T6-treated billet aluminum and a black anodized surface are specified for the spacers. It fits listed 2003–2024 4Runner 2WD and 4WD models, but not XREAS suspension models.

Skip it if you need rear lift components too; the TASTONTUP AW-119 lists front and rear spacers in a 3-inch/2-inch kit.

This fits a 4Runner owner who wants a front-only leveling change and values a stated no-special-tools installation. It is not the choice for raising the rear, and XREAS-equipped models are excluded.

Listed on Amazon as: Dynofit 2 Inch Leveling Lift Kit for Toyota Tacoma (2005-2023), 4Runner (2003-2024) and FJ Curise (2007-2015), Raise Front Suspension 2in, Set of 2Pcs Forged Aluminum Strut Spacers Level Kit

#8

8. KSP 2-Inch Leveling Kit

• Weight: 2 lb
• Material: Aluminum
• Material Type: Aluminum

Best for: Front leveling for compatible 4Runners.

Why it ranks #8: It raises the front 2 inches and lists 2003–2024 4Runner fitment, but the product title centers on Tacoma and it excludes X-REAS suspension.

A two-inch front raise gives compatible 2003–2024 4Runners a simple way to change the front stance without specifying a rear lift. The kit includes forged aircraft aluminum strut spacers and hardware, and its application also names Tacoma and FJ Cruiser models for buyers sharing the same vehicle family.

The two-piece strut spacer kit is listed to raise the front by two inches, with bolts, nuts, washers, and instructions included for the installation process. KSP notes that spacer thickness and resulting lift are not a one-to-one relationship because of suspension geometry, an important distinction when setting expectations. Its fit list covers 2003–2024 4Runner 2WD and 4WD, excluding XREAS suspension. The listing recommends an alignment after installation, so allow for that follow-up when planning the height change.

Skip it if you want a matched front-and-rear lift; the KSP 9K017 lists a 3-inch front and 2-inch rear setup.

Consider this for a compatible 4Runner owner seeking a front-only stance change with hardware and instructions supplied. XREAS models are excluded, and the listing recommends an alignment after the suspension height changes.

Listed on Amazon as: KSP 2" lift kits for Tacoma 2005-2023, Leveling Kit Lift Strut Spacers

#9

9. Rough Country N3 3-Inch Lift

• Weight: 39 lb
• Material: Alloy Steel, Aluminum, Rubber, Zinc
• Material Type: Alloy Steel, Aluminum, Rubber, Zinc

Best for: Early 4Runner trail clearance.

Why it ranks #9: This is a complete older-generation option for 1996–2002 4WD models, with N3 struts and shocks and stated clearance for tires up to 31 inches.

A complete N3 strut-and-shock package gives 1996–2002 4Runner 4WD owners a three-inch lift and clearance for tires up to 31×10.50. Its spring-and-damper components make this more than a spacer-only change, supporting a suspension refresh alongside added room for rougher routes.

The included coil springs, N3 lifted struts, rear N3 shocks, and mounting hardware create a coordinated kit for the specified 4WD 4Runner years. Strut extensions do not preload the coil spring, a detail relevant to buyers weighing how the front lift is achieved. Recoil cut-off construction on the rear shocks is specified for added protection. Rough Country describes installation as an at-home bolt-on process, but recommends a certified technician with suspension experience and post-install checks.

Skip it if you own a 2WD 4Runner or a different model year; the listed application is limited to 1996–2002 4WD.

This suits owners of a 1996–2002 4Runner 4WD who want added clearance with new front and rear suspension components. Keep the 31×10.50 tire limit and the recommendation for qualified installation in view.

Listed on Amazon as: Rough Country 3" Lift Kit w/N3 Struts for 1996-2002 Toyota 4-Runner 4WD – 77131

#10

10. maXpeedingrods 3-Inch Lift Kit

• Weight: 18500 g
• Material: Steel
• Material Type: Steel

Best for: Early-model 31-inch tire clearance.

Why it ranks #10: Its 1996–2002 fitment and stated 31-inch tire clearance suit older 4Runners, but the supplied component details are less complete than the higher-ranked older-generation kit.

A full three-inch suspension lift for 1996–2002 4Runner 2WD and 4WD models is specified to create room for 31-inch tires. High-strength steel construction with a frosted, powder-coated finish gives buyers a concrete durability feature, while the included shocks make this a broader package than a spacer-only listing.

The stated three-inch lift increases ground clearance and is intended to allow installation of 31-inch tires, a useful match for owners planning larger rubber. Its high-strength steel construction and powder-coated finish are described as helping resist corrosion and rust over time. The application includes both 2WD and 4WD 1996–2002 4Runners, and shocks are listed among the included components. Installation details and the remaining contents are not specified in the supplied information, so confirm what the package provides before scheduling work.

Skip it if you need a listed application newer than 2002; the Rough Country 76630 covers 2010–2024 4Runners instead.

Choose this for a 1996–2002 4Runner owner seeking a steel full-lift kit and stated 31-inch tire clearance. Its listed year range is narrow, and the supplied details leave the complete component list unclear.

Listed on Amazon as: maXpeedingrods 3" Suspension Lift Kit for Toyota 4-Runner 1996-2002