Best Hummingbird Feeder Tubes And Stoppers With Bb
A strong choice for hummingbird feeder repairs pairs a tube and stopper that fit your opening; for shoppers specifically seeking a ball bearing, Ministry of Warehouse Feeder Tubes is the standout because its red rubber tip includes one. The ten options here range from that 10-piece set to small DIY replacement packs, with several tapered stoppers sized for blown-glass feeders and some floral-tip designs. Pack size, stopper dimensions, materials, and included cleaning brushes differ, so matching the replacement to your feeder matters more than choosing by appearance alone.
Check the opening measurements before ordering: a stopper that is too wide may need trimming, while one that is too narrow may not seal. The guide below highlights the clearest fit details and where product descriptions leave compatibility uncertain.
Ministry of Warehouse Feeder Tubes leads for shoppers seeking hummingbird feeder tubes and stoppers with a BB: the listing explicitly says the red rubber tip has a ball bearing inside, and the pack includes 10 tubes and stoppers. Its stopper measures 3/4 inch at the insertion end and 7/8 inch where the glass tube fits. Those dimensions make it especially relevant when replacing parts in an existing feeder, though the listing notes the soft rubber can be cut to fit some openings.
Our Top Picks
Best OverallMinistry of Warehouse Feeder Tubes
The 10-piece set explicitly includes a ball bearing inside each red rubber tip, and gives stopper measurements of 3/4 inch and 7/8 inch.
View on Amazon
Best Sized StopperCreative Hobbies Hummingbird Tubes
Its three tubes have a one-inch tapered stopper measured at 15/16 inch across the top and 5/8 inch at the bottom, useful for fit checks.
View on Amazon
Best Floral TipThree replacement tubes combine a red flower tip with a one-inch stopper tapered from 15/16 to 5/8 inch for blown-glass feeders.
View on Amazon- Best Four-Pack Ryidkcs Feeder Replacement Kit
- Best With Brushes DECOHS Floral Feeder Tubes
Compare Hummingbird Feeder Tubes and Stoppers
| # | Product | Dimensions | Material Type | Material | Buy |
|---|---|---|---|---|---|
| 1 | 1. Ministry of Warehouse Feeder TubesBest Overall | — | — | — | View on Amazon |
| 2 | 2. Creative Hobbies Hummingbird TubesBest Sized Stopper | 1"L x 1"W x 3.75"H | Plastic | Plastic | View on Amazon |
| 3 | 3. HASSLICKIT Floral TubesBest Floral Tip | — | Plastic | Plastic | View on Amazon |
| 4 | 4. Ryidkcs Feeder Replacement KitBest Four-Pack | — | — | — | View on Amazon |
| 5 | 5. DECOHS Floral Feeder TubesBest With Brushes | 1"L x 0.63"W x 2.76"H | Plastic | Plastic | View on Amazon |
| 6 | 6. Baderke White Feeder TubesTwelve-piece feeder rotation supply | 5.12"L x 2.76"W x 2.76"H | — | — | View on Amazon |
| 7 | 7. Baderke Feeder TubesTen-piece routine replacement supply | 4.72"L x 2.36"W x 2.36"H | Plastic | Plastic | View on Amazon |
| 8 | 8. Jiozermi Feeder TubeGlass-and-rubber three-piece set | 2.7"L x 0.9"W x 0.63"H | Glass, Plastic, Rubber | Glass, Plastic, Rubber | View on Amazon |
| 9 | 9. Elnwnnkc Feeder TubesBottle-conversion stopper tubes | 7.48"L x 5.12"W x 0.79"H | — | — | View on Amazon |
| 10 | 10. hejhncii Feeder TubesTwo-piece bottle feeder conversion | 7.48"L x 5.12"W x 0.79"H | — | — | View on Amazon |
Detailed Reviews: Best Hummingbird Feeder Tubes And Stoppers With Bb

#1 · Best Overall
1. Ministry of Warehouse Feeder Tubes
Best for: BB-equipped glass-tube replacements.
Why it ranks #1: The 10-piece set explicitly includes a ball bearing inside each red rubber tip, and gives stopper measurements of 3/4 inch and 7/8 inch.
A ball bearing sits inside the red rubber tip, distinguishing this ten-piece Ministry of Warehouse set for buyers seeking tubes and stoppers with BB. The soft stopper measures 3/4 inch at its narrowest and 7/8 inch at its widest, and can be trimmed to adapt its fit.
The ten-piece quantity gives you replacements for multiple feeders or a supply for routine swaps. The stopper’s stated 3/4-inch insertion end and 7/8-inch glass-tube end clarify how it meets the feeder opening and tube. Because the rubber is soft and can be cut with a razor, you can adjust it for many openings; if the rubber does not match, the glass part can still be used with other-size rubber stoppers. The BB is located inside the red rubber tip.
- Ten feeder tubes and stoppers in one pack
- Ball bearing inside the red rubber tip
- Soft rubber stopper can be cut with a razor
- Glass part can be used with other-size rubber stoppers
- The stated stopper dimensions may not match every feeder opening without trimming.
Skip it if you need a stated tapered stopper range; Creative Hobbies HBF lists a one-inch stopper with 15/16-inch and 5/8-inch diameters.
Choose this set if you need ten replacements and specifically want the ball bearing inside the red rubber tip. It suits adjustable setups, but check the stated stopper dimensions against your feeder opening before installation.
Full product details
| Brand | Ministry of Warehouse |
|---|---|
| Manufacturer | Ministry of Warehouse |
Listed on Amazon as: Feeder Tubes & Stoppers w/BB for Hummingbird, Pack of 10
View on Amazon
#2 · Best Sized Stopper
2. Creative Hobbies Hummingbird Tubes
- Dimensions: 1"L x 1"W x 3.75"H
- Material Type: Plastic
- Material: Plastic
Best for: DIY feeders with measured stopper fit.
Why it ranks #2: Its three tubes have a one-inch tapered stopper measured at 15/16 inch across the top and 5/8 inch at the bottom, useful for fit checks.
A tapered one-inch stopper with stated 15/16-inch and 5/8-inch diameters makes the Creative Hobbies three-pack unusually clear about its fit dimensions. Those measurements help DIY feeder makers compare the stopper with an opening before assembly, while red-tipped tubes provide components for building customized hummingbird feeders.
The three-piece pack supplies tubes for a small DIY build or replacement task, and the tapered stopper is specified at 15/16 inch across the top and 5/8 inch at the bottom. That narrowing supports fitting into feeder openings, while the one-inch stopper length gives another measurement to check during assembly. Plastic construction and included stoppers and tubes provide the listed parts for a nectar feeder project. The product information does not state a cleaning brush or a larger pack quantity.
- Three tubes for DIY feeder projects
- One-inch tapered stopper
- Stopper diameters specified as 15/16 inch and 5/8 inch
- Plastic construction with tube and stopper included
- The three-pack provides fewer replacement tubes than the listed 10- and 12-piece sets.
Skip it if you need ten replacements in one set; Ministry of Warehouse offers a ten-pack with a ball bearing inside each red rubber tip.
Pick this measured three-pack for a custom feeder or a few replacements when stopper dimensions matter during assembly. Its compact quantity suits smaller projects; choose another set if you need more tubes at once.
Full product details
| Brand | Creative Hobbies |
|---|---|
| Color | Red |
| Included Components | Stopper, Tube |
| Dimensions | 1"L x 1"W x 3.75"H |
| Manufacturer | Creative Hobbies |
| Part Number | HBF |
| Material | Plastic |
| Model Number | HBF |
| Recommended Uses | Nectar |
| Special Feature | 3 Pack |
| Additional Information | Important information Safety Information General hummingbird feeder safety guidelines apply. |
Listed on Amazon as: Creative Hobbies Hummingbird Feeder Tubes with Red Tip – for DIY Hummingbird Feeders, 1" Long Stopper |Pack of 3 (Original)
View on Amazon
#3 · Best Floral Tip
3. HASSLICKIT Floral Tubes
- Material Type: Plastic
- Material: Plastic
Best for: Floral replacement for blown-glass feeders.
Why it ranks #3: Three replacement tubes combine a red flower tip with a one-inch stopper tapered from 15/16 to 5/8 inch for blown-glass feeders.
A red flower tip paired with a tapered one-inch rubber stopper gives this HASSLICKIT three-pack a clear replacement role for blown-glass hummingbird feeders. The stopper narrows from 15/16 to 5/8 inch, helping buyers compare its dimensions with an opening when refreshing a feeder or assembling a DIY setup.
The one-inch stopper’s 15/16-to-5/8-inch taper is described as a snug, leak-resistant fit in most blown-glass feeders, making the dimensions useful when matching a replacement. A red flower tip supplies the floral-style feeding end, and smooth plastic construction is described as easy to clean. The three included feeder tubes, flower tips, and stoppers support a small refresh or DIY project. Regular cleaning is advised to prevent mold or bacterial growth.
- Three floral-style feeder tubes
- One-inch stopper tapers from 15/16 to 5/8 inch
- Red flower tips
- Smooth plastic construction described as easy to clean
- The stated snug fit applies to most blown-glass feeders, not every feeder opening.
Skip it if you need four tubes in one pack; Ryidkcs RS0139LJ lists a four-pack with the same stated stopper taper.
This is a sensible match for buyers replacing floral-style parts on most blown-glass feeders or starting a small DIY build. Compare the tapered stopper dimensions with your opening, and keep up with the stated regular cleaning.
Full product details
| Brand | HASSLICKIT |
|---|---|
| Color | Red |
| Included Components | Feeder Tube, Red Flower Tip, Tapered Stopper |
| Item Weight | 0.03 kg |
| Manufacturer | HASSLICKIT |
| Part Number | IPUS-FN-WSQSZ |
| Material | Plastic |
| Model Number | IPUS-FN-WSQSZ |
| Recommended Uses | Nectar |
| Special Feature | Hummingbird-Friendly Design |
| Additional Information | Important information Safety Information Avoid using harmful substances. Clean regularly to prevent mold or bacterial growth. Secure feeder properly to prevent it from being knocked over. |
Listed on Amazon as: 3-Pack Floral Hummingbird Feeder Replacement Parts – DIY Bottom Replacement Feeding Tubes with Red Flower Tip & Tapered Stopper – Fits Most Outdoor Glass Bird Feeders
View on AmazonWhy it ranks #4: This four-pack includes red flower-tip tubes and one-inch rubber stoppers tapered from 15/16 to 5/8 inch for most standard blown-glass feeders.
Four red flower-tipped tubes give the Ryidkcs kit more replacement pieces than a three-pack, while its one-inch rubber stopper has a stated 15/16-to-5/8-inch taper. The listed dimensions and compatibility with most standard blown-glass feeders help buyers assess fit before replacing worn parts or building a custom feeder.
The four-pack supports replacing several worn components in one maintenance round or keeping spares for later. Each tube has a one-inch rubber stopper tapering from 15/16 to 5/8 inch, described as providing a firm, leak-resistant seal for most standard blown-glass feeders. Red flower tips serve as the floral feeding end, while smooth plastic is described as gentle during feeding and easy to clean. The stated compatibility is not universal, so opening dimensions remain relevant.
- Four tubes in the replacement kit
- One-inch stopper taper from 15/16 to 5/8 inch
- Red flower tips
- Smooth plastic described as easy to clean
- The stated compatibility covers most standard blown-glass feeders, not every feeder.
Skip it if you want only three floral replacements; HASSLICKIT offers a three-pack with the same stated one-inch tapered stopper dimensions.
Choose this kit for several floral replacements or a DIY project using most standard blown-glass feeders. Its four-piece quantity and measured stopper suit planned maintenance, but verify that your feeder opening matches the stated taper.
Full product details
| Brand | Ryidkcs |
|---|---|
| Color | Red |
| Manufacturer | Ryidkcs |
| Part Number | RS0139LJ |
| Model Number | RS0139XH |
| Recommended Uses | Nectar |
| Special Feature | Leakproof |
Listed on Amazon as: Hummingbird Feeder Replacement Kit (4-Pack) – DIY Glass Feeder Tubes with Red Flower Tips & Rubber Stoppers – Universal Fit for Outdoor Nectar Feeders
View on Amazon
#5 · Best With Brushes
5. DECOHS Floral Feeder Tubes
- Dimensions: 1"L x 0.63"W x 2.76"H
- Material Type: Plastic
- Material: Plastic
Best for: Floral tips with cleaning brushes.
Why it ranks #5: The nine plastic tubes include three cleaning brushes, and the listing describes a one-inch tapered stopper and outward-adjustable flower parts to help prevent leakage.
Three included brushes give the DECOHS nine-piece floral-tip set a practical maintenance advantage, providing tools for cleaning alongside replacement tubes. The red floral ends can be pulled outward to help prevent nectar leakage, while the one-inch tapered stoppers support installation in a variety of blown-glass feeders.
With nine tubes, you can rotate replacements during regular feeding, and the three brushes support cleaning between uses. Each tube measures 2.76 by 1 by 0.63 inches, while its one-inch tapered stopper is described as easy to install. The listed compatibility covers a variety of blown-glass hummingbird feeders, not every opening. Pulling some flower parts outward is specified as a way to prevent leakage, making tip position relevant when assembling the feeder.
- Nine floral-tip tubes included
- Three cleaning brushes included
- One-inch tapered stopper for installation
- Flower parts can be pulled outward to help prevent leakage
- The listed compatibility is for a variety of blown-glass feeders, not all feeder types.
Skip it if you want a larger 12-piece supply; Baderke LE-Baderke-2472 lists twelve tubes, though it does not list brushes.
This set fits buyers who want floral replacement tips and cleaning brushes for a blown-glass feeder routine. Its stated fit is limited to a variety of blown-glass feeders, so compare the tapered stopper with your opening.
Full product details
| Brand | DECOHS |
|---|---|
| Color | Red |
| Included Components | Brushes |
| Dimensions | 1"L x 0.63"W x 2.76"H |
| Manufacturer | DECOHS |
| Part Number | DEC-Hummingbird-Feeder-Tubes-9Pcs |
| Material | Plastic |
| Model Number | DEC-GH5-4L |
| Recommended Uses | Nectar |
| Special Feature | Flexible |
| Additional Information | Important information Safety Information Handle with care to avoid harm to hummingbirds. Maintain the feeder according to weather conditions. |

#6
6. Baderke White Feeder Tubes
- Dimensions: 5.12"L x 2.76"W x 2.76"H
Best for: Twelve-piece feeder rotation supply.
Why it ranks #6: Its 12-piece set is the largest stated pack among these options, with tubes listed at 2.36 by 1.57 by 0.79 inches.
A 12-piece quantity distinguishes this Baderke set for buyers wanting multiple floral-tip replacement tubes on hand. Its listed dimensions are 2.36 by 1.57 by 0.79 inches, giving a concrete size reference for planning feeder changes, while the product is specified for hummingbird nectar feeding.
The twelve tubes provide a larger rotation supply for regular feeding and replacement needs, as stated in the product information. Each part is sized at 2.36 by 1.57 by 0.79 inches, which helps buyers compare the listed dimensions with their intended feeder setup. The title identifies floral tips and stoppers, and nectar is the recommended use. No stopper taper measurements or specific feeder compatibility are supplied, so fit assessment rests on the stated dimensions and your feeder opening.
- Twelve feeder tubes and stoppers included
- Floral-tip design identified in the title
- Dimensions listed as 2.36 by 1.57 by 0.79 inches
- Nectar listed as the recommended use
- No stopper taper measurements or specific feeder compatibility are provided.
Skip it if you need measured stopper diameters; Creative Hobbies HBF specifies a one-inch stopper taper from 15/16 to 5/8 inch.
This larger set suits buyers who want a dozen replacement tubes for a nectar-feeding routine. Use the listed dimensions when assessing your setup; choose a dimension-specific tapered stopper if opening compatibility is your priority.
Full product details
| Brand | Baderke |
|---|---|
| Color | White |
| Included Components | hummingbird feeder parts |
| Dimensions | 5.12"L x 2.76"W x 2.76"H |
| Manufacturer | Baderke |
| Part Number | LE-Baderke-2472 |
| Model Number | LE-Baderke-2472 |
| Recommended Uses | Nectar |
| Special Feature | / |
Listed on Amazon as: 12 Pcs Hummingbird Feeder Tubes with Stoppers, Floral Tip, White
View on Amazon
#7
7. Baderke Feeder Tubes
- Dimensions: 4.72"L x 2.36"W x 2.36"H
- Material Type: Plastic
- Material: Plastic
Best for: Ten-piece routine replacement supply.
Why it ranks #7: The 10-piece set supplies multiple replacement parts, and its listed tube dimensions are 2.36 by 1.57 by 0.79 inches; no BB is specified.
Ten tubes and stoppers make the Baderke LE-Baderke-6425 set a substantial replacement supply for regular feeder changes. Each part is listed at 2.36 by 1.57 by 0.79 inches, giving buyers concrete dimensions to consider when planning a nectar-feeder setup or replacing multiple components.
The ten-piece quantity supports having several replacement parts available for a routine feeding setup, while the listed dimensions—2.36 by 1.57 by 0.79 inches—help with planning storage and feeder assembly. Plastic construction is specified, and nectar is the recommended use. The product information describes these as hummingbird feeder tubes and stoppers, but does not provide a tapered stopper range or a specific compatibility list, so the supplied size details are the main fit reference.
- Ten tubes and stoppers included
- Dimensions listed as 2.36 by 1.57 by 0.79 inches
- Plastic material specified
- Nectar listed as the recommended use
- No tapered stopper measurements or specific feeder compatibility are provided.
Skip it if you need a specified tapered stopper range; Creative Hobbies HBF lists a one-inch stopper with two diameter measurements.
Consider this set if you want ten plastic replacement parts for nectar feeders and can use the listed overall dimensions to assess your setup. Buyers needing a stated tapered fit should choose a more dimension-specific option.
Full product details
| Brand | Baderke |
|---|---|
| Included Components | hummingbird feeder parts |
| Dimensions | 4.72"L x 2.36"W x 2.36"H |
| Item Weight | 4.96 ounces |
| Manufacturer | Baderke |
| Part Number | LE-Baderke-6425 |
| Material | Plastic |
| Model Number | LE-Baderke-6425 |
| Recommended Uses | Nectar |
| Special Feature | Long Lasting |
| Additional Information | Important information Safety Information Always ensure the feeder is securely attached to prevent accidental spills or detachment. Do not use any food other than what is recommended for hummingbirds to avoid harming them. Follow local regulations regarding wildlife feeding. |
Listed on Amazon as: 10 Pcs Hummingbird Feeder Tubes and Stopper Replacement Parts Humming Bird Feeder Tube Make Your Own Dispenser Outside Water Dispenser Tubes Stoppers for Wine Bottle Outdoor
View on Amazon
#8
8. Jiozermi Feeder Tube
- Dimensions: 2.7"L x 0.9"W x 0.63"H
- Material Type: Glass, Plastic, Rubber
- Material: Glass, Plastic, Rubber
Best for: Glass-and-rubber three-piece set.
Why it ranks #8: This three-piece set combines glass, plastic, and rubber, with a red silicone flower tip; the description does not specify a ball bearing.
Glass, plastic, and rubber are all listed materials in this Jiozermi three-piece feeder-tube set, distinguishing it from products specified as plastic alone. Red silicone flowers provide a visible floral tip, while the tapered rubber plug is described as helping minimize spills during nectar feeding.
Three tubes provide a small supply for daily use or straightforward replacements, and the stated 2.7-by-0.9-by-0.63-inch dimensions offer a reference when planning installation. The tapered rubber plug is described as minimizing spills, connecting stopper design to feeder handling, while the red silicone flower is intended to catch hummingbirds’ attention. Glass, plastic, and rubber are the listed materials. No specific feeder compatibility dimensions or cleaning accessories are supplied, so the set's size is the available fit reference.
- Three feeder tubes included
- Glass, plastic, and rubber listed as materials
- Red silicone flower tip
- Tapered rubber plug described as minimizing spills
- No specific feeder compatibility range or cleaning accessories are listed.
Skip it if you need included cleaning brushes; DECOHS DEC-GH5-4L includes three brushes with its nine floral-tip tubes.
This set suits buyers seeking three replacements with a red silicone flower and mixed listed materials. Use its stated dimensions to assess a feeder setup; choose a brush-included kit if cleaning tools are part of your needs.
Full product details
| Brand | Jiozermi |
|---|---|
| Included Components | Feeder Tube |
| Dimensions | 2.7"L x 0.9"W x 0.63"H |
| Manufacturer | Jiozermi |
| Part Number | HJS250430022 |
| Material | Glass, Plastic, Rubber |
| Model Number | HJS250430022 |
| Recommended Uses | Nectar |
| Special Feature | Vibrant Red Silicone Flower for Hummingbird Attraction |
Listed on Amazon as: Hummingbird Feeder Tube with Stopper, 3 Pcs
View on Amazon
#9
9. Elnwnnkc Feeder Tubes
- Dimensions: 7.48"L x 5.12"W x 0.79"H
Best for: Bottle-conversion stopper tubes.
Why it ranks #9: The listing describes conical rubber stoppers and red tips for mostly blown-glass feeders, but gives no precise stopper measurements or stated BB.
Conical rubber bottle stoppers position this Elnwnnkc set for turning recycled wine bottles or other bottles into hummingbird feeders. Its red tip is described as attracting hummingbirds, and the listing also says the tubes fit most blown-glass feeders while providing a leakproof connection.
The conical stopper links the tube to bottle or feeder openings, supporting the stated use of repurposing bottles as feeders. Red tips provide the listed visual feature for attracting hummingbirds, while the claimed fit for most blown-glass feeders offers another possible setup. The product information does not specify a piece count or stopper dimensions, so it gives limited detail for planning a multi-feeder project or checking the stopper against a particular opening.
- Conical rubber bottle stoppers
- Red tips
- Listed for converting recycled bottles into feeders
- Described as fitting most blown-glass feeders
- The listing provides no stopper dimensions or piece count.
Skip it if you need exact stopper taper measurements; Creative Hobbies HBF lists a one-inch stopper with 15/16-inch and 5/8-inch diameters.
Consider this option if repurposing a bottle is central to your feeder project and the conical stopper suits your setup. The listing gives no dimensions or count, so it offers less detail for fit and quantity planning.
Full product details
| Brand | Elnwnnkc |
|---|---|
| Color | Multicolor |
| Included Components | as described |
| Dimensions | 7.48"L x 5.12"W x 0.79"H |
| Manufacturer | Elnwnnkc |
| Part Number | Elnwnnkc |
| Model Number | Elnwnnkc |
| Recommended Uses | Nectar |
| Special Feature | Durable |
Listed on Amazon as: Hummingbird Feeder Tubes with Tapered Rubber Bottle Stoppers
View on Amazon
#10
10. hejhncii Feeder Tubes
- Dimensions: 7.48"L x 5.12"W x 0.79"H
Best for: Two-piece bottle feeder conversion.
Why it ranks #10: This two-piece kit is described for glass bottles and recycled wine bottles, but does not specify a ball bearing or detailed stopper dimensions.
A two-piece pack and conical rubber stoppers make this hejhncii kit a compact option for converting glass bottles into hummingbird feeders. Red-tipped tubes are described for that reuse, and the title identifies a drip-resistant tip with bee guards for hummingbird feeder setups.
Two tubes suit a small conversion project or a limited number of replacements, and the conical rubber stoppers are identified for glass bottles. The red tips connect the kit to hummingbird feeding, while the title’s drip-resistant and bee-guard descriptions add relevant features for feeder use. The product details do not provide stopper dimensions or a specific bottle compatibility range, so the listed information gives no precise measurement for matching the stopper to an opening.
- Two feeder tubes included
- Conical rubber stoppers for glass bottles
- Red tips
- Title identifies drip-resistant tips with bee guards
- No stopper dimensions or specific bottle compatibility range are provided.
Skip it if you need more than two replacements; Baderke LE-Baderke-2472 lists a 12-piece set for regular feeding and replacement needs.
This kit fits buyers converting a glass bottle or making a small feeder setup, especially when the named drip-resistant tip and bee guards matter. Check your bottle opening carefully because stopper dimensions are not listed.
Full product details
| Brand | hejhncii |
|---|---|
| Color | Multicolor |
| Included Components | as described |
| Dimensions | 7.48"L x 5.12"W x 0.79"H |
| Manufacturer | hejhncii |
| Part Number | hejhncii |
| Model Number | hejhncii |
| Special Feature | Durable |
Listed on Amazon as: Hummingbird Feeders Tube 2PCS, Conical Rubber Stopper for Glass Bottles, Bird Feeding Kits with Drip-Resistant Tip Bee Guards for Hummingbird Feeders
View on AmazonWhy a stopper can leak even when it looks close
A stopper can leak when its taper or insertion depth does not match the feeder opening, even if the tube itself appears suitable. The product set illustrates why dimensions matter: Creative Hobbies Hummingbird Tubes and HASSLICKIT Floral Tubes list one-inch stoppers tapering from 15/16 inch to 5/8 inch, while Ministry of Warehouse Feeder Tubes gives two widths for its rubber stopper: 3/4 inch at the insertion end and 7/8 inch at the tube end. These measurements describe different parts, so do not compare them as if they were all opening diameters.
Before buying, measure the feeder opening and compare it with the stopper section that must enter it. Ministry of Warehouse notes that its rubber is soft and can be cut with a razor, but trimming is not a substitute for checking the fit; an overly small stopper may still fail to seal.
The DECOHS listing also says pulling flower parts outward can help prevent leakage, so assembly position can matter too.
What the BB claim does—and does not—establish
Only Ministry of Warehouse Feeder Tubes explicitly identifies a ball bearing inside the red rubber tip, so it is the clearest match for the BB part of this search. The other listings describe floral tips, tapered stoppers, or drip-resistant designs, but they do not establish that they contain a ball bearing. Nor does the supplied product information explain how the bearing affects nectar flow or whether it blocks insects.
Treat those as questions to verify rather than assuming a flower tip or a stopper performs the same function. A practical trade-off is choosing the exact named feature over a different design with more documented fit details: Ministry of Warehouse supplies the BB claim and stopper measurements, while Creative Hobbies and HASSLICKIT give more explicit taper dimensions but no BB claim.
If a bearing is essential, check the received part and confirm the seller’s current description before relying on it for a specific pest-control purpose.
How to Choose Feeder Tubes and Stoppers
Stopper dimensions and feeder opening
Look first for a stopper measurement you can compare with your feeder opening. Creative Hobbies Hummingbird Tubes and HASSLICKIT Floral Tubes list a one-inch stopper tapering from 15/16 inch to 5/8 inch; Ministry of Warehouse Feeder Tubes lists 3/4 inch at the insertion end and 7/8 inch at the tube end. DECOHS Floral Feeder Tubes describes a one-inch tapered stopper but gives no taper widths.
These are not interchangeable measurements, so identify which section enters your feeder before comparing. Buyers replacing a known-size part may favor a listing with explicit dimensions; those with an unusual opening should measure carefully and contact the seller if fit remains unclear.
Ministry of Warehouse notes its soft rubber can be trimmed, but that does not guarantee a seal.
Pack size and included extras
Choose a pack size that suits how many feeders you maintain and whether you want cleaning tools included. The available range runs from hejhncii Feeder Tubes at two pieces to Baderke White Feeder Tubes at 12; Ministry of Warehouse Feeder Tubes and Baderke Feeder Tubes each list DECOHS Floral Feeder Tubes includes nine tubes plus three brushes, while most listings describe replacement tubes without brushes.
A single feeder owner may prefer a smaller kit to avoid storing extras, while someone rotating several feeders may value a larger set. Remember that a higher stated tube count does not mean each component is identical: confirm the listed tip, stopper, and material details before choosing based on quantity alone.
Tip design and stated materials
Check whether you prefer a floral tip and whether the listing identifies the materials, rather than assuming every red tip is built the same way. Creative Hobbies Hummingbird Tubes and HASSLICKIT Floral Tubes describe plastic tubes with red floral-style tips; Jiozermi Feeder Tube lists glass, plastic, and rubber and describes a red silicone flower. Ministry of Warehouse Feeder Tubes uses a red rubber tip with a stated ball bearing, making its configuration distinct from the floral designs.
A buyer seeking the specific BB feature should prioritize that explicit description, while a DIY maker may favor a floral-style tip and a clear stopper taper. Material details vary and are not supplied for every option, so check the product listing when material is a deciding requirement.
Which feeder tube and stopper should you choose?
For the specific BB feature, choose Ministry of Warehouse Feeder Tubes: it is the only listing that explicitly says a ball bearing is inside the red rubber tip, and it supplies stopper measurements. If matching a tapered stopper to a blown-glass feeder is your priority, Creative Hobbies Hummingbird Tubes or HASSLICKIT Floral Tubes list a one-inch taper from 15/16 to 5/8 inch. Choose DECOHS Floral Feeder Tubes if included cleaning brushes matter; it comes with three.
For the largest stated tube quantity, Baderke White Feeder Tubes provides 12 pieces. Jiozermi Feeder Tube is the option whose listed materials include glass, plastic, and rubber.
For any option, compare the stopper section that enters your feeder with the opening measurement; the product descriptions do not establish a universal fit.
Related Buying Guides
Frequently Asked Questions
How can I check whether a replacement stopper will fit my feeder opening?
Measure the feeder opening and compare it with the stopper section that enters it; do not assume a universal fit. The Ministry of Warehouse listing gives stopper dimensions of 3/4 inch at the insertion end and 7/8 inch where the glass tube fits. Some listings also describe a taper, so check the stated measurements against your feeder.
How often should hummingbird feeder tubes and stoppers be cleaned?
Clean the tubes and stoppers whenever you clean the feeder, and follow the feeder maker’s care directions. Take the parts apart if possible, rinse away nectar residue, and let them dry before reassembly. The DECOHS set includes three brushes, which may help with cleaning, but the listing does not specify a cleaning schedule.
Do ball bearings in feeder tips prevent bees or other insects from reaching nectar?
A ball bearing should not be assumed to keep bees or other insects away. The Ministry of Warehouse listing says its red rubber tip has a ball bearing inside, but it does not establish that the feature prevents insect access. Check the feeder design and observe how it performs after installation.
Which replacement tubes are described as having a tapered stopper?
Creative Hobbies Hummingbird Tubes and HASSLICKIT Floral Tubes list a one-inch taper from 15/16 to 5/8 inch. Compare those measurements with your feeder opening before choosing, since the listings do not establish a universal fit. A tapered shape alone does not confirm compatibility with every blown-glass feeder.
Which option includes brushes, and how many are provided?
The DECOHS set includes three cleaning brushes, according to its product title. This may suit buyers who want brushes included with replacement tubes and stoppers. Check that the tube and stopper arrangement also suits your feeder; the presence of brushes does not indicate that the parts will fit a particular opening.
Final Words
For a BB specifically, the Ministry of Warehouse set is the clearest match: its listing identifies a ball bearing inside the red rubber tip and provides stopper measurements. Compare those measurements with your feeder opening before ordering. If a tapered stopper is your priority, consider Creative Hobbies or HASSLICKIT; choose DECOHS for included brushes or Baderke for the largest stated tube quantity.
No listed option is established as a universal fit.

