Best Edelbrock Carb For Chevy 350: Compare 10 Models

#1 · Best Overall

1. Edelbrock 1906 AVS2

• Weight: 3.8 lb
• Compatible with Vehicle Type: Car
• Dimensions D x W x H: 4.1"D x 5.5"W x 5.5"H

Best for: Street builds needing electric choke.

Why it ranks #1: Its 650 CFM rating suits a street-focused small-block comparison, while annular primary boosters and an electric choke add useful listed features.

Annular primary boosters are the 1906 AVS2’s key distinction, promoting fuel atomization for smooth throttle response in a street-oriented 650-CFM setup. Its electric choke adds an automatic choke option, while the satin-finish four-barrel format suits buyers seeking an Edelbrock replacement or upgrade for a small-block application.

Edelbrock says the AVS2 is calibrated for street performance in small-block and some big-block engines, making its 650-CFM rating relevant to buyers choosing a four-barrel for that use. Annular primary boosters improve fuel atomization, which supports the stated smooth throttle response. The electric choke avoids a manual-choke control routine, and the included base gasket and fuel filter provide two installation-related components in the package. Its listed compatible vehicle type is car.

Skip it if you need a manual choke or a higher-flow carburetor than its 650-CFM rating provides.

Choose this for a street-driven small-block Chevy 350 build where 650 CFM, an electric choke, and annular primary boosters suit the intended setup. Check the engine and manifold requirements before choosing this four-barrel replacement.

Listed on Amazon as: Edelbrock 1906 AVS2 Carburetor 650 CFM With Electric Choke, Satin Finish

#2 · Manual Choke Option

2. Edelbrock 1905 AVS2

• Weight: 8.9 lb
• Compatible with Vehicle Type: Car
• Dimensions D x W x H: 7.38"D x 13.25"W x 6.75"H

Best for: Manual-choke street cruising.

Why it ranks #2: This 650 CFM AVS2 has annular primary boosters and a manual choke, making it a close street-oriented alternative when manual control is preferred.

Annular-flow primary boosters distinguish the Edelbrock 1905 AVS2, supporting improved fuel atomization for off-idle and cruising performance. Its 650-CFM rating and manual choke suit a street-focused four-barrel setup where the driver prefers choke control, while the square-flange, non-EGR configuration identifies the mounting and emissions format stated in the listing.

Edelbrock describes the AVS2 calibration as improving off-idle and cruising performance, a practical match for a street-driven Chevy 350 rather than a buyer selecting solely for maximum airflow. Its annular primary boosters improve fuel atomization and are associated with smooth throttle response. The 650-CFM capacity sets the airflow category, while the manual choke means the driver operates choke control instead of relying on an electric choke. The listing identifies a square flange and non-EGR configuration.

Skip it if you want an electric choke; the Edelbrock 1906 AVS2 offers electric choke operation at the same listed 650-CFM rating.

This fits a street Chevy 350 owner who wants the AVS2 booster design and prefers manual choke control. Its 650-CFM rating, square flange, and non-EGR description should align with the planned intake and vehicle configuration.

Listed on Amazon as: Edelbrock 1905 AVS2 Series Carburetor 650 cfm Square Flange Non-EGR Manual Choke Satin AVS2 Series Carburetor

#3 · Electric Choke 600

3. Edelbrock 1406 Performer

• Weight: 9.3 lb

Best for: Electric-choke 600-CFM builds.

Why it ranks #3: The listed 600 CFM, square-bore Performer configuration and electric choke offer a lower-flow alternative to the 650 CFM AVS2 models.

Electric choke is the key convenience on the Edelbrock 1406 Performer, a 600-CFM, four-barrel square-bore carburetor with a satin exterior. Those listed traits give Chevy 350 owners a straightforward configuration to evaluate when seeking moderate airflow and electric choke operation in a Performer-series carburetor.

The 1406 combines a 600-CFM rating with a square-bore four-barrel format, allowing a Chevy 350 buyer to compare its airflow and flange style with the planned intake. Its electric choke provides choke operation without specifying a manual control, which may simplify the driver's routine. Edelbrock lists a satin exterior and single inlet, adding finish and fuel-entry details for installation planning. The supplied listing does not provide further calibration or secondary specifications.

Skip it if you need a specified secondary type or detailed calibration information before choosing; this listing does not provide those details.

This suits a Chevy 350 owner seeking a 600-CFM square-bore Performer with electric choke and a satin exterior. Because the listing leaves secondary and calibration details unspecified, verify those requirements from the carburetor documentation before committing.

Listed on Amazon as: Edelbrock 1406 Edelbrock Performer Series Carburetor

#4

4. Edelbrock 1405 Performer

• Weight: 8.7 lb
• Compatible with Vehicle Type: Car

Best for: Manual-choke 600-CFM setups.

Why it ranks #4: Its 600 CFM square-bore design, air-valve secondary, and manual choke make it a clearly specified option for a street-oriented comparison.

A 600-CFM square-bore four-barrel with a manual choke gives the Edelbrock 1405 a clear fit for buyers who want direct choke control on a street-oriented Chevy 350. The listing also identifies air-valve secondaries, a single-feed fuel inlet, and calibration for gasoline, making its configuration easy to evaluate against an existing setup.

Edelbrock describes the 1405 as calibrated for optimum marine performance, while its verified facts also point to daily-driving capability; buyers should weigh that stated application against their own Chevy 350 use. The 600-CFM capacity and square-bore flange define core airflow and mounting characteristics. An air-valve secondary and single-feed fuel inlet further specify its fuel and secondary arrangement, while the manual choke requires driver involvement. A base gasket and instruction book are included.

Skip it if you prefer electric choke operation; the Edelbrock 1406 is also listed at 600 CFM and has an electric choke.

A Chevy 350 owner wanting a 600-CFM square-bore carburetor with air-valve secondaries and manual choke can consider this Performer. Take its stated marine calibration into account, and check the intake and intended application before installation.

Listed on Amazon as: Edelbrock 1405 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor

#5

5. Edelbrock 9906 Performer

• Weight: 5 lb

Best for: Renewed economy-minded builds.

Why it ranks #5: This remanufactured 600 CFM model has vacuum secondaries and an electric choke; its listing says it is inspected and cleaned before reassembly.

A fully disassembled, inspected, and cleaned remanufacturing process sets this 600-CFM Edelbrock Performer apart, with failed parts replaced before reassembly. Its vacuum secondary and electric choke pair with a fuel-economy focus, making it a candidate for a Chevy 350 owner seeking a renewed carburetor rather than a new unit.

The 600-CFM rating places this Performer in a moderate airflow category for a street-oriented Chevy 350, while the vacuum secondary configuration identifies its secondary operation. Its electric choke supplies automatic choke control, and the listing describes the carburetor as designed for fuel economy and smoother acceleration. As an Amazon Renewed remanufactured unit, it is disassembled, inspected, cleaned, and reassembled, with parts failing performance standards replaced; studs and hardware are included.

Skip it if you require a new carburetor; the Edelbrock 1405 Performer is listed as new and offers a 600-CFM manual-choke setup.

Consider it for a Chevy 350 street build prioritizing a 600-CFM carburetor, electric choke, and renewed fuel-economy-focused unit. Its remanufactured status and vehicle-specific fit designation make those details important to the purchase decision.

Listed on Amazon as: Edelbrock 9906 Performer 600 CFM Vacuum Secondary Electric Choke Remanufactured Carburetor (Renewed)

#6 · Lowest CFM

6. Edelbrock 1404 Performer

• Weight: 0.27 g
• Compatible with Vehicle Type: Scooter
• Dimensions D x W x H: 10.6"D x 13"W x 6.6"H

Best for: Mild street builds with manual choke.

Why it ranks #6: At 550 CFM, it has the lowest stated airflow here and a manual choke, offering a lower-flow option for buyers prioritizing mild street performance.

A 550-CFM rating makes the Edelbrock 1404 the lowest-capacity option in this roundup, giving mild Chevy 350 street builds a specific airflow category to consider. Its manual choke, single inlet, and primary venturi booster provide further configuration detail, with the booster identified as supporting smoother acceleration and drivability.

The 1404 is described as calibrated for good street performance and fuel economy in Edelbrock Performer manifolds, a specific application context for Chevy 350 shoppers. Its 550-CFM capacity and mild-performance description help define the intended street-oriented choice. A primary venturi booster supports smoother acceleration and drivability, while the manual choke requires driver control. The package listing also includes an instruction guide, metering jets, metering rods, and a step-up spring for setup-related work.

Skip it if you need 600 CFM; the Edelbrock 1405 Performer offers that rating with a manual choke.

Choose this for a mild street-oriented Chevy 350 setup that suits 550 CFM and a manual choke, particularly when using an Edelbrock Performer manifold. Its lower airflow rating is the central fit boundary to consider.

Listed on Amazon as: Edelbrock 1404 Performer Series 550 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor

#7

7. Edelbrock 1407 Performer

• Weight: 8.96 oz

Best for: Higher-airflow manual-choke builds.

Why it ranks #7: The 750 CFM rating exceeds the 600–650 CFM options, and its air-valve secondary and manual choke are specified for buyers considering more airflow.

The 750-CFM rating makes the Edelbrock 1407 the higher-airflow manual-choke option among the listed Performer choices, while its bottom-feed primary venturi booster is specified for smoother acceleration and drivability. Its square-bore four-barrel format and single-feed inlet give Chevy 350 builders concrete configuration details to assess.

For a Chevy 350 build whose setup calls for more airflow than a 600-CFM option, the 1407’s 750-CFM rating establishes its intended capacity category; the listing does not prescribe a specific engine combination. Its bottom-feed primary venturi booster is stated to support smoother acceleration and drivability. The air-valve secondary, single-feed fuel inlet, gasoline calibration, and manual choke define key operating choices, so buyers can evaluate these against their intake and choke preferences.

Skip it if you want a 600-CFM setup; the Edelbrock 1405 Performer offers that rating with a manual choke.

Pick this for a Chevy 350 combination specifically calling for a 750-CFM, square-bore four-barrel and manual choke. Its higher airflow category and single-feed arrangement merit checking against the engine setup and intake before purchase.

Listed on Amazon as: Edelbrock 1407 Performer 750 CFM Square Bore 4-Barrel Air Valve Secondary Manual Choke New Carburetor

#8 · Electric Choke 750

8. Edelbrock 1411 Performer

• Compatible with Vehicle Type: Car
• Dimensions D x W x H: 10.7"D x 12.9"W x 6.6"H

Best for: Electric-choke 750-CFM builds.

Why it ranks #8: This 750 CFM Performer pairs an electric choke with an air-valve secondary, but its higher stated airflow may be less fitting than the midrange choices.

A 750-CFM rating paired with an electric choke makes the Edelbrock 1411 a high-airflow Performer choice for Chevy 350 builds that call for that capacity. Its bottom-feed primary venturi booster is identified as supporting smoother acceleration and drivability, while the four-barrel square-bore flange specifies its mounting format.

The 1411’s 750-CFM capacity sets it apart for a combination that calls for more airflow than a 600-CFM Performer, though the listing does not prescribe a particular Chevy 350 build. Its electric choke avoids the manual-choke control routine, and the bottom-feed primary venturi booster is stated to promote smoother acceleration and drivability. A single-feed fuel inlet and air-valve secondary add useful configuration details for checking the carburetor against the intake and fuel arrangement.

Skip it if you need a 600-CFM rating; the Edelbrock 1406 Performer is listed at 600 CFM with an electric choke.

Consider this for a Chevy 350 setup calling for a 750-CFM square-bore carburetor, electric choke, and air-valve secondary. Its airflow rating is the main boundary: match it to the engine and intake rather than choosing by choke type alone.

Listed on Amazon as: Edelbrock 1411 Performer Carburetor 750 CFM With Electric Choke Satin Finish Non-EGR

#9

9. Edelbrock 1913 AVS2

• Weight: 8.8 lb
• Dimensions D x W x H: 7.4"D x 13.4"W x 6.6"H

Best for: Higher-flow AVS2 street setups.

Why it ranks #9: Its 800 CFM rating is the largest listed, and it includes AVS2 annular primary boosters; that capacity is a less conservative starting point for a street 350.

The 800-CFM rating is the defining feature of the Edelbrock 1913 Thunder Series AVS2, positioning it for Chevy 350 combinations that call for more airflow than a 650-CFM AVS2. Its square-flange format, electric choke, and annular-booster AVS2 design give buyers several concrete setup factors to weigh.

Edelbrock describes AVS2 carburetors as calibrated for street performance in small-block and some big-block engines, and the 1913 listing gives this model an 800-CFM rating. Annular primary boosters improve fuel atomization, supporting the stated smooth throttle response. The square-flange format and electric choke help buyers assess mounting and choke-control needs, while its higher capacity makes engine airflow requirements especially relevant. The listed dimensions are 7.4 by 13.4 by 6.6 inches.

Skip it if you want a 650-CFM AVS2; the Edelbrock 1906 offers that rating and also has an electric choke.

This is for a Chevy 350 build whose airflow requirements support an 800-CFM AVS2 and whose setup suits a square flange and electric choke. Confirm available space and intake compatibility, especially given its listed dimensions.

Listed on Amazon as: Edelbrock 1913 Thunder Series AVS2 Carburetor 800 cfm Square Flange

#10

10. Edelbrock 1901 Q-Jet

• Weight: 9 lb
• Compatible with Vehicle Type: ATV

Best for: Small-engine and dual-quad projects.

Why it ranks #10: The description targets small-cubic-inch engines and dual-quad applications, not a typical single-carb Chevy 350 match, so its stated use is least aligned.

Calibration for small-cubic-inch engines and dual-quad applications is the defining use case of the Edelbrock 1901 Q-Jet. That makes it a specialized alternative for a Chevy 350 project only when the intended arrangement matches those stated applications; the listing does not provide a CFM rating or choke specification.

Edelbrock identifies the 1901 as calibrated for small-cubic-inch engines and dual-quad applications, including named Edelbrock manifolds such as the RPM Dual-Quad Air-Gap, C-26, F-28, and Street Tunnel Ram. For a Chevy 350 buyer, that application guidance makes the intake and carburetor arrangement central to selection. The description also says single-carb applications should be matched with an Edelbrock Performer or Performer EPS manifold, or other brands. No CFM or choke detail is supplied.

Skip it if you need a stated CFM rating or choke type; the Edelbrock 1906 AVS2 lists 650 CFM and an electric choke.

This is for a buyer planning a dual-quad arrangement or a single-carb setup matched to the stated manifold guidance. A Chevy 350 installation should be evaluated around that application, since the listing supplies neither CFM nor choke specifications.

Listed on Amazon as: Edelbrock 1901 Q-Jet Carburetor