Best Boat Navigation Lights for Bow, Stern and Portable Setups

#1 · Best Overall

1. attwood Clamp-On Kit

• Lens Material: Polycarbonate
• Wattage: 5 W
• Voltage: 12 V DC

Best for: Small-boat portable kit.

Why it ranks #1: A complete portable set includes red/green bow and white stern lights, quick-release C-clamps, a threaded pole and hardware for small boats.

Quick-release C-clamp mounts let this Attwood kit add red/green bow and white stern lighting without permanent fixtures, a practical setup for small boats and tenders. Its plug-and-play package includes a threaded pole and mounting hardware, while sealed, shock-proof composite housings and shatter-proof polycarbonate lenses protect the light components in marine use.

The separate bow and stern lights provide the two positions needed for navigation lighting, and the clamp mounts make the kit portable between suitable boats rather than dependent on permanent mounting points. A threaded pole and included hardware round out the installation pieces. The sealed composite housings and polycarbonate lenses address exposure and impact concerns, while the 12-volt specification means this kit is not a power-free option; it suits boats with a compatible 12-volt supply.

Skip it if you need lighting for a boat without a 12-volt source; this kit is specified for 12-volt DC operation.

Choose this kit if you want portable bow-and-stern lighting for a small boat, tender, or similar craft and value clamp mounting. Its 12-volt requirement makes the available onboard power the key fit consideration.

Listed on Amazon as: attwood 14190-7 Water-Resistant Portable Clamp-On LED Light Kit with Marine Gray Finish

#2 · Best Flush Mount

2. Oznium Flush-Mount Pair

• Lens Material: Polymethylacrylate
• Wattage: 5 W
• Voltage: 12 V

Best for: Flush-mount bow-light buyers.

Why it ranks #2: The red and green flush-mount pair lists 112.5-degree coverage and two-nautical-mile visibility, with USCG certification stated in its features.

Flush mounting keeps this Oznium red-and-green LED pair discreet on the boat while providing a stated two-nautical-mile visibility range. The lights are specified for 112.5-degree coverage and described as USCG certified, with ABYC and NMMA compliance claims; the low-profile installation suits buyers who want bow signaling without a protruding fixture.

The flush-mount format keeps the lights close to the boat’s surface, a useful option where a protruding fixture would interfere with the vessel’s appearance or available space. Red portside and green starboard lights provide the two bow signals, while the 112.5-degree coverage is specified for each position. Oznium states two-nautical-mile visibility and USCG certification, plus ABYC and NMMA compliance. The 12-volt requirement means installation depends on a compatible onboard electrical supply.

Skip it if you need a complete navigation-light kit with a white stern lamp; the attwood 14190-7 includes bow and stern lights.

This pair suits boat owners who want discreet flush-mounted red-and-green bow lights with a stated two-nautical-mile range. Make sure the boat supports 12-volt power and has a separate stern light where needed.

Listed on Amazon as: Brightest 2 Mile LED Boat Navigation Lights Pair. Flush Mount, USCG 112.5 Degree 2nm boating nav light for pontoon boat, yacht, kayak, air boats, marine. 1 Red Portside, 1 Green Starboard (Black)

#3 · Best 3NM Bow Light

3. Sebnux Bow Light

• Lens Material: Polycarbonate
• Wattage: 5 W
• Voltage: 12 V

Best for: Corrosion-conscious bow-light buyers.

Why it ranks #3: This 12-volt red-and-green bow light lists three-nautical-mile visibility, IP67 waterproofing and a two-year manufacturer warranty.

A copper-plated zinc housing gives the Sebnux red-and-green bow light a specific corrosion-resistance feature for marine use. The listing also states a three-nautical-mile visual range and IP67 waterproofing, combining a defined visibility claim with protection against water exposure. Its 12-volt specification makes onboard power compatibility a key part of choosing this light.

The copper-plated zinc housing is identified as enhancing corrosion and UV resistance, addressing two concerns for hardware mounted on a boat. Sebnux lists a three-nautical-mile visual range and says the light meets the USCG 3NM requirement, giving buyers a stated visibility benchmark. IP67 waterproofing is intended to help avoid short-circuit damage from water exposure. The 12-volt input and red-and-green bow-light format make the boat’s electrical supply and required lighting positions relevant to installation.

Skip it if you need lighting for a boat without a 12-volt supply; the attwood 14190-7 is also specified for 12-volt DC.

This suits buyers seeking a red-and-green bow light with a stated three-nautical-mile range and a corrosion-conscious housing. Its 12-volt requirement and bow-light role should match the boat’s power and navigation-light setup.

Listed on Amazon as: LED Boat Navigations Light Marine Red and Green Bow Light (Silver)

#4

4. Obcursco Bow Lights

• Lens Material: Plastic
• Wattage: 5 W
• Voltage: 12 V

Best for: Fog-conscious bow-light buyers.

Why it ranks #4: The 12-volt red-and-green deck-mount light lists a 225-degree radiation angle and two-nautical-mile visibility, and states that it meets USCG requirements.

A stated two-nautical-mile visibility range gives the Obcursco red-and-green bow light a clear role for boaters seeking visible port and starboard signals after dark. Its 225-degree radiation angle and die-cast, triple chrome-plated zinc cover pair directional lighting with a corrosion-conscious housing, while the 12-volt specification ties it to a compatible onboard supply.

The red and green lenses provide the two bow-side colors, and the stated 225-degree radiation angle defines their coverage rather than offering all-around illumination. Obcursco says the light meets USCG requirements for two-nautical-mile visibility, a useful specification for night navigation. A die-cast zinc cover with triple chrome plating is intended to withstand marine exposure, while the 12-volt DC input and 20AWG wire specification matter when planning the electrical connection.

Skip it if you need a complete bow-and-stern kit; the attwood 14190-7 includes red/green bow and white stern lights.

This fits boaters seeking a 12-volt, red-and-green bow light with a specified two-nautical-mile range. Consider the 225-degree coverage and its bow-light role when deciding whether it supplies the lighting positions your boat needs.

Listed on Amazon as: Obcursco Boat Navigation Lights, Red and Green LED Light, Boat Accessories

#5 · Best Task-Light Combo

5. attwood LightArmor Pole

• Lens Material: Polycarbonate
• Wattage: 10 W
• Voltage: 12 V

Best for: Foredeck task-light users.

Why it ranks #5: This 10-inch red/green pole light adds an integrated task light, corrosion-resistant construction and pre-installed wiring leads.

An integrated task light distinguishes this 10-inch Attwood bi-color pole light, adding foredeck illumination alongside red-and-green navigation lighting. Its straight pole has corrosion-resistant construction and a locking collar, while pre-installed wiring leads can simplify the connection workflow. The cool-to-the-touch LED engine is rated for more than 50,000 hours of use.

Red-and-green lighting provides the bi-color navigation function, and the integral task light can illuminate the foredeck when that extra work light is useful. The 10-inch straight pole and locking collar form a defined pole-light setup, while pre-installed wiring leads reduce the need to prepare those leads separately. Attwood describes the construction as corrosion resistant and the LED engine as cool to the touch, rated for over 50,000 hours; the unit operates on 12 volts.

Skip it if you need a height-adjustable stern pole; the Obcursco OS004-001-036 telescopes from 27 to 48 inches.

This fits 12-volt boaters wanting red-and-green pole lighting plus a foredeck task light. Its fixed 10-inch pole suits installations that do not require adjustable height, and the locking collar and wiring leads shape the mounting workflow.

Listed on Amazon as: attwood NV6LC2-10-7 Marine Bi-Color LightArmor LED Navigation Pole Light, 10-Inch, Red/Green

#6

6. Nilight 24LED Bow Light

• Lens Material: Polycarbonate
• Voltage: 12 V

Best for: Simple surface-mount bow lighting.

Why it ranks #6: Its 24 LEDs split evenly between red and green, with 112.5-degree illumination angles and screws included for installation.

Twenty-four LEDs, split evenly between red and green, give this Nilight bow light a compact two-color signal in one surface-mounted housing. Its 112.5-degree illumination angles are specified for both colors, and the included two screws support a straightforward mounting process. The light runs on 12 volts and uses a polycarbonate lens.

The 12 red and 12 green 2835 LEDs combine both bow-side colors in one fixture, reducing the number of separate light housings to position. Nilight lists 112.5-degree illumination angles for both colors, which defines the coverage provided. The stainless-steel housing comes installed, and two included screws secure the light in place. Its waterproof design and polycarbonate lens address exposure and lens construction, while the 12-volt specification determines whether the boat’s electrical system is compatible.

Skip it if you need a white stern light included; the attwood 14190-7 packages bow and stern lights together.

Choose this for a 12-volt boat needing a single red-and-green bow fixture with screws included for mounting. Its one-light package means buyers completing a full navigation setup need to account for stern lighting separately.

Listed on Amazon as: Nilight Marine Boat Navigation Light 24LED Red Green Signals Bow Lights

#7

7. Botepon Bow Lights

• Lens Material: Acrylic
• Wattage: 3.6 W
• Voltage: 12 V

Best for: 12-volt bow-light upgrades.

Why it ranks #7: These 12-volt red-and-green lights are described as waterproof and intended for several boat types, but supplied details give no visibility distance.

Botepon says these red-and-green bow lights are at least three times brighter than original marine navigation lights, a stated upgrade for boat owners seeking greater visibility at night. The pair is specified for 12-volt operation and uses acrylic lenses; its IP67 waterproof claim also suits buyers considering exposure to wet boating conditions.

The red-and-green color pairing identifies this as bow lighting, while the product description positions its increased brightness against original marine navigation lights. That distinction may matter to owners upgrading existing bow illumination, though the supplied details do not give a visibility distance. A 12-volt specification clarifies the power requirement, and the IP67 waterproof claim supports use in wet conditions. Its acrylic lenses complete the listed optical construction; check that the boat's power and mounting arrangement suit the installation.

Skip it if you need a stated visibility distance or a complete stern-and-bow kit; the Obcursco BNL009 lists two-nautical-mile visibility.

Consider these lights if you want a 12-volt red-and-green bow-light upgrade and value the listed IP67 rating. The supplied information gives no visibility distance, so buyers prioritizing a stated range may prefer another option.

Listed on Amazon as: Navigation Lights For Boats Led, Boat Red and Green Bow Lights, Boat Night Fishing Lights, Deck Lights, IP67 Waterproof for Pontoon Boat Bas Boat Dinghy Kayak Jon Boat Yacht

#8 · Best Telescoping Stern

8. Obcursco Telescoping Stern Light

• Lens Material: Alloy
• Wattage: 3.5 W

Best for: Adjustable stern-light shoppers.

Why it ranks #8: The white stern light has a 27-to-48-inch adjustable pole, 360-degree angle and stated three-nautical-mile visibility.

An adjustable 27-to-48-inch pole lets the Obcursco stern light adapt its height to different mounting needs, while its 360-degree beam serves as an all-around anchor light. The 63 SMD LEDs are listed with a three-nautical-mile visibility distance, and the 12-volt specification makes this a powered stern-light choice for compatible boats.

The telescoping pole’s 27-to-48-inch adjustment gives buyers latitude to set the light height for their mounting arrangement, and the 360-degree angle provides all-around illumination. Obcursco lists 63 SMD LEDs, a 6000K white color temperature, and three-nautical-mile visibility, so the product’s role is clearly a white stern or anchor light rather than a red/green bow pair. Its 12-volt operating voltage and IP67 waterproof claim inform power planning and exposure considerations.

Skip it if you need red-and-green bow signals in the same purchase; the attwood 14190-7 includes bow and stern lights.

Pick this for a boat needing an adjustable-height, all-around white stern or anchor light. The telescoping range helps with mounting flexibility, but it does not replace red-and-green bow lighting when a complete navigation setup is needed.

Listed on Amazon as: Obcursco Boat Stern Lights, 27"-48” Telescoping Pole Anchor Light with Base

#9

9. AMBIPASION Telescoping Stern Light

• Lens Material: Acrylic
• Wattage: 3 W
• Voltage: 12 V

Best for: Telescoping anchor-light buyers.

Why it ranks #9: This 12-volt stern light includes a telescoping pole, base, spare bulb and wiring; its listed title gives a 26-to-48-inch range.

A telescoping pole adjusts from 26 to 48 inches, giving the AMBIPASION stern light height flexibility for different transom setups. Its 360-degree illumination is listed as meeting USCG requirements, while the package includes a pole base, spare LED bulb, spare wire, and mounting screws to support setup and future component replacement.

The adjustable pole allows height selection within the listed 26-to-48-inch span, which can help adapt the light to a boat’s mounting position. Its 360-degree all-around illumination serves the stern-light role, and the listing states a three-nautical-mile visibility claim. The package includes a two-pin pole-light base, a spare replaceable LED bulb, spare wire, and three mounting screws, giving buyers installation pieces and replacement components. The light is specified at 12 volts, so confirm the boat’s power matches.

Skip it if you need a stated 12-to-24-volt range; the AMBIPASION APBAL001 lists 12-to-24-volt compatibility.

Choose this for a boat needing an adjustable-height, all-around stern or anchor light with replacement parts included. Its listed 12-volt specification and 26-to-48-inch pole range are the key electrical and mounting boundaries.

Listed on Amazon as: Stern Light Boat Anchor Light, 26"–48" Telescoping Pole Boat Lights with Base, Marine Navigation Lights for Boats LED, for Pontoon, Fishing, Bass & Jon Boats, 12–24V (Silver)

#10

10. AMBIPASION Fold-Down Stern Light

• Lens Material: Acrylic
• Wattage: 3 W
• Voltage: 12 V

Best for: Fold-down stern-light buyers.

Why it ranks #10: This is a white stern-only light rather than a complete set; it lists a 12-inch foldable design, three-nautical-mile visibility and a three-year warranty.

A 180-degree foldable design gives this 12-inch AMBIPASION stern light a practical storage advantage when the light is not upright for use. The listing specifies IP67 waterproofing and a three-nautical-mile visibility claim, making it a white rear-light option for small boats and pontoons with a compatible 12-to-24-volt system.

The 12-inch light folds down through 180 degrees, which can make it easier to lower for storage or when not in its operating position. Its stated 12-to-24-volt compatibility supports a broader range of listed electrical systems than a single-voltage specification would. AMBIPASION lists IP67 waterproofing and three-nautical-mile visibility, while the included four mounting screws provide basic installation hardware. As a white stern light, it serves a different position from red-and-green bow lights.

Skip it if you need bow and stern lights together; the attwood 14190-7 packages red/green bow and white stern lighting.

This is a fit for boaters wanting a fold-down white stern light and a stated 12-to-24-volt operating range. Check that a 12-inch light and the included mounting-screw approach suit the boat’s stern installation.

Listed on Amazon as: 12 Inches Anchor Light Stern Light, White Navigation Lights for Boats LED Waterproof IP67, Fold Down Rear Boat Lights for Marine, Pontoon, Jon Boat, Small Boats (12-24V)