Best Atv Lift Table for ATVs, UTVs, and Dirt Bikes

#1 · Best Overall

1. VEVOR 1500 lb ATV Scissor Lift

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: ATV, Motorcycle, Powersports, UTV
• Dimensions: 33.1 x 16.1 x 4.7 in

Best for: Versatile Powersports Garage Lift.

Why it ranks #1: Explicitly lists ATV, motorcycle, powersports, and UTV compatibility, with 1,500-pound capacity, foot-operated hydraulics, four wheels, and two ratchet belts.

A 1,500-pound capacity paired with listed ATV, motorcycle, powersports, and UTV compatibility makes this VEVOR hydraulic scissor lift unusually versatile for a garage. Its foot-operated mechanism raises the load, while four casters make the 58-pound steel jack movable between work areas.

The foot-operated hydraulic system lifts without requiring an air compressor, and the included long handle supports operation of the jack. A three-position safety pin provides selectable mechanical locking, while two ratchet belts are included to help secure a machine. The 33.1-by-16.1-inch unit has four wheels for repositioning, though the compact jack form differs from a full-length shop table. Its 1,500-pound rating and broad listed vehicle compatibility suit varied powersports maintenance.

Skip it if you need a full-length motorcycle platform; Black Widow's 105.5-inch ProLift provides a much larger work surface.

This works for garage owners lifting motorcycles, ATVs, UTVs, or other listed powersports machines with a compact wheeled hydraulic jack. Consider its small footprint if you need a broad platform for full-vehicle service.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Jack 1500 LBS Capacity ATV Scissor Lift Jack Portable Motorcycle Lift Table with 4 Wheels Hydraulic Foot-Operated Hoist Stand for Motorcycle ATV UTV Powersports

#2 · Wide ATV Platform

2. ZEEVIUMFT 1500 lb ATV Lift Table

• Load Capacity: 1500 lb
• Compatible with Vehicle Type: ATV, UTV, Motorcycle, Lawn Tractor, Power…
• Dimensions: 106 x 48 x 33.5 in

Best for: Mixed Equipment Maintenance Shop.

Why it ranks #2: Designed for ATVs, UTVs, motorcycles, and lawn tractors; its 48-inch-wide deck extends to 106 inches and lifts up to 1,500 pounds.

A 48-inch-wide steel deck and listed compatibility with ATVs, UTVs, motorcycles, and lawn tractors make this ZEEVIUMFT lift a broad-use shop platform. Its 1,500-pound air-hydraulic system raises equipment from 7 to 33.5 inches, while a front extension reaches 106 inches in length.

The front extension and included side extensions, ramps, and anti-slip mat support loading and positioning different machines on the wide deck. At 106 inches long with the front extension installed, the platform accommodates longer equipment, including the listed lawn tractors and UTVs. Air-hydraulic lifting provides a 7-to-33.5-inch range with a 1,500-pound limit. Buyers should plan around this large platform and its pneumatic operation; the product listing identifies a foot pedal and does not specify an air-pressure range.

Skip it if you need a stated compressor pressure before planning installation; Black Widow's pneumatic table lists its 90–110 PSI requirement.

This suits a shop maintaining several types of power equipment that can use the extended, wide platform. Its 106-inch length and unspecified air-pressure requirement deserve consideration when planning workspace and air supply.

Listed on Amazon as: 1,500 LB ATV/Motorcycle Lift Table – Heavy-Duty Air/Hydraulic Power Lift, Extra-Wide 48" Platform, Ergonomic Stand-Up Installation, Bonus Jack, Fits ATV/UTV/Motorcycle/Lawn Tractors

#3 · Highest Capacity

3. Black Widow 2500 lb UTV Table

• Load Capacity: 2500 lb
• Material: Alloy Steel
• Compatible with Vehicle Type: Utility Terrain Vehicle
• Dimensions: 94.5 x 64 x 48 in

Best for: Heavy UTV and Golf-Cart Service.

Why it ranks #3: Its 2,500-pound rating and 94.5-by-60-inch platform suit larger UTVs, ATVs, and golf carts; air/hydraulic lifting reaches 48.5 inches.

A 2,500-pound rating and 60-inch-wide platform put this Black Widow table in a heavier class for UTV, ATV, and golf-cart service. Air-over-hydraulic foot-pump operation raises machines from 8 to 48.5 inches, providing an elevated work surface for maintenance and detailing.

The 94.5-by-60-inch platform gives larger recreational vehicles room on the table, and the foot pump raises them to a maximum of 48.5 inches. Its air-over-hydraulic system requires compressed air; the listed range is 90–150 PSI, and the compressor is not included. Wheel stops support positioning for four-wheelers, while a ten-position automatic safety lock adds locking choices during work. The 946-pound steel lift is shop-scale equipment rather than a portable jack.

Skip it if you lack a compressed-air supply; VEVOR's hydraulic 1,500-pound scissor lift operates by foot pedal without listed air requirements.

This is aimed at shops servicing heavier UTVs, ATVs, or golf carts that need a wide elevated platform. Its 946-pound weight and air requirement make workspace and compressor planning essential.

Listed on Amazon as: 64" W UTV Lift Table, 2,500 lb, Air/Hydraulic, ATV Motorcycle, Black Widow

#4 · Portable ATV Jack

4. VEVOR 350 lb Scissor Lift

• Load Capacity: 350 lb
• Material: Steel
• Compatible with Vehicle Type: ATV, Dirt Bikes
• Dimensions: 19.1 x 18.5 x 15.8 in

Best for: Light-Duty Dirt-Bike Garage Work.

Why it ranks #4: Specifications name ATV compatibility, and four wheels, a 350-pound rating, and a 13.8-to-36-inch lift range suit lighter off-road machines.

A 36-inch maximum lift height gives this VEVOR scissor table a taller working range than its 350-pound capacity might suggest, helping raise off-road motorcycles for hands-on garage work. Foot-operated hydraulics, a wide deck, J-hooks, and four wheels round out a setup aimed at moving and supporting lighter machines.

The foot pedal operates the hydraulic lift, so raising a bike does not require turning a screw or working a separate hand pump. Its 13.8-to-36-inch range offers several working heights, while the wide deck and J-hook help support and secure the machine. Four wheels make the 63-pound steel unit mobile around a workspace. The 350-pound capacity and listed ATV and dirt-bike compatibility make it a better match for lighter machines than heavy touring motorcycles.

Skip it if you need to raise a machine above 350 pounds; VEVOR's 1,500-pound hydraulic lift is a better match.

This suits owners servicing lighter dirt bikes or ATVs who want pedal lifting and a wheeled stand with substantial height range. Check the 350-pound limit against the machine before choosing it for regular shop work.

Listed on Amazon as: VEVOR Hydraulic Motorcycle Lift Table, 350 lbs Capacity Motorcycle Scissor Jack Lift with Wide Deck, J-Hooks, 4 Wheels, Hydraulic Foot-Operated Jack Stand for ATV Dirt Bikes

#5

5. TrailBlaze 350 lb Lift Table

• Load Capacity: 350 LBS
• Compatible with Vehicle Type: Motorcycle
• Dimensions: 15 x 15 x 12.99 in

Best for: Portable Light-Duty Workshop Lift.

Why it ranks #5: The listing describes ATV and UTV use and provides a 350-pound capacity, 13-to-34-inch range, and four swivel casters, two of them locking.

Four swivel casters, including two locking wheels, help this TrailBlaze lift move around a garage and stay positioned for work. The hydraulic foot-operated scissor stand handles up to 350 pounds and adjusts from 13 to 34 inches, giving lighter motorcycles and ATVs a raised service position.

The 13-to-34-inch range supports different working heights for repairs, cleaning, tire changes, and inspections, while the wide non-slip deck helps support the machine. A solid-steel scissor structure and red powder-coated finish are listed for workshop use, with the description noting resistance to oil and rust. Four 360-degree casters allow repositioning, and two lock for stability when parked. At 350 pounds, it is limited to lighter machines despite its broad vehicle wording.

Skip it if you service machines above 350 pounds; Black Widow's 2,500-pound UTV table covers substantially heavier vehicles.

This is a practical option for owners moving a light motorcycle or ATV around a home workshop, with casters and a useful height range. Its 350-pound limit should decide whether it fits your machine.

Listed on Amazon as: Heavy Duty Hydraulic Motorcycle Lift Table, 350 lbs Capacity – Wide Non-Slip Deck, Foot-Operated Scissor Jack – 4 Swivel Casters & Safety Pin – Portable Red Platform for Motorcycle, ATV

#6

6. Jack Boss 350 lb Lift Jack

• Load Capacity: 3.5E+2 lb
• Compatible with Vehicle Type: Motorcycle

Best for: Compact Rubber-Pad Bike Stand.

Why it ranks #6: The title names ATV and dirt-bike use; it supports 350 pounds, lifts from 12 to 33.5 inches, and has a rubber-padded steel deck.

A striped-vein rubber pad gives this Jack Boss scissor stand a contact surface intended to resist slipping and scratching during motorcycle work. The foot-operated hydraulic lift supports up to 350 pounds and moves from 12 to 33.5 inches, with four wheels for repositioning.

The 12-to-33.5-inch range provides several lift heights for maintenance, while the 15-by-11.5-inch table keeps the support platform compact. Its solid-steel construction has a red powder coating described as rust-preventive and easier to clean after repairs. The rubber pad adds a protective, grippy surface where the bike contacts the stand. At 18.73 kilograms and 350 pounds of capacity, it fits lighter motorcycle tasks rather than larger vehicle platforms.

Skip it if you need a wide platform for a UTV; Black Widow's 60-inch-wide table is listed for utility terrain vehicles.

This fits motorcycle owners wanting a compact wheeled stand, a rubber contact pad, and useful lift range for lighter service jobs. Its small 15-by-11.5-inch platform is the key fit boundary.

Listed on Amazon as: Jack Boss 350 Lbs Motorcycle Lift Jack Table, Hydraulic Foot-Operated Scissor Lift Jack for ATV Dirt Bike, Motorcycle Stand with 4 Wheels

#7

7. VIVOHOME 350 lb Lift Table

• Load Capacity: 350 lb
• Material: Iron + Steel
• Compatible with Vehicle Type: Dirt Bikes, Sport Bikes, Mini Bikes
• Dimensions: 11.4 x 15 x 30.9 in

Best for: Quick-Setup Dirt-Bike Lifting.

Why it ranks #7: Its 350-pound hydraulic jack is suited to dirt bikes, with a 12-to-30.9-inch lift, locking pin, J-hook, and included adapter bars.

Ninety percent pre-assembly means this VIVOHOME hydraulic table needs only its four wheels attached before setup is complete. It lifts up to 350 pounds from 12 to 30.9 inches using a foot pedal, while a locking pin and J-hook add support for dirt-bike maintenance.

The foot pedal raises the machine without bending or kneeling, and the two-position legs let users fine-tune the working height. A locking pin is specified to prevent accidental drops if the release lever is hit, while the J-hook secures the bike. Included adapter bars expand the listed use to dirt bikes, sport bikes, and mini bikes. Its 350-pound capacity and 12-to-30.9-inch range set clear limits for heavier or taller lifting needs.

Skip it if you need to lift a machine over 350 pounds; VEVOR's 1,500-pound hydraulic lift supports a higher rated load.

This suits dirt-bike and mini-bike owners who want quick assembly and a foot-operated lift with a locking pin. Check the 350-pound limit and listed height range against your particular maintenance needs.

Listed on Amazon as: VIVOHOME 350 Lbs Hydraulic Motorcycle Lift Table Motorcycle Scissor Jack

#8

8. ZEEVIUMFT 1500 lb ProLift

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: Motorcycle
• Dimensions: 106 x 24 x 33.5 in

Best for: Wide-Deck Motorcycle Shop Setup.

Why it ranks #8: This 1,500-pound air/hydraulic table has a 48-inch-wide platform and side extensions, but the listed vehicle compatibility is motorcycle only.

A 48-inch-wide platform gives this ZEEVIUMFT air-hydraulic table room to support large motorcycles, while its 1,500-pound capacity suits substantial machines. The pneumatic foot pedal raises bikes from 7 to 31.25 inches, and eight height positions let riders settle on a working level for maintenance.

The 106-inch-long platform and 48-inch width provide a broad loading surface, while included side extensions and ramps help configure the table for motorcycle access. The pneumatic foot pedal raises up to 1,500 pounds through eight positions, supporting controlled positioning during service. Operation requires 90–110 PSI from an air compressor, which is not included, so the shop needs a compatible air source. The listed vehicle compatibility is motorcycles, not ATVs or UTVs.

Skip it if you need a lift explicitly listed for ATVs and lawn tractors; ZEEVIUMFT's 1,500-pound ATV model covers those machines.

This is a fit for motorcycle owners with compressed air who want a wide platform and multiple work heights. Its listed vehicle compatibility is motorcycle, so shoppers servicing ATVs should consider that boundary.

Listed on Amazon as: 1500 LB Motorcycle Lift Table, Heavy Duty Air/Hydraulic ATV Lift with Side Extensions, 48" W x 33.5" H, User-Friendly Installation Design with Motorcycle Jack, Fits Harley/Indian/Custom

#9

9. Black Widow ProLift

• Load Capacity: 1500 lb
• Material: Steel
• Compatible with Vehicle Type: Motorcycle
• Dimensions: 105.5 x 48 x 31.25 in

Best for: Air-Powered Cruiser Maintenance.

Why it ranks #9: The pneumatic table supports 1,500 pounds and has an extra-wide platform, but its listed vehicle compatibility is motorcycle rather than ATV.

A 1,500-pound capacity and 48-inch-wide platform give the Black Widow ProLift room for heavy cruiser and V-twin service. Its pneumatic foot pedal lifts from 7 to 31.25 inches, while an adjustable wheel clamp and tie-down points help hold a motorcycle upright as work begins.

The air-powered pedal raises a motorcycle smoothly across a 7-to-31.25-inch range, but requires 90–110 PSI and a separate compressor. To load, push the motorcycle onto the platform and into the adjustable wheel clamp, tighten the vise, then attach safety straps to built-in tie-down points. That sequence supports a more secure service setup. The 105.5-by-48-inch table is listed for motorcycles, and the product ships by freight.

Skip it if you need a hydraulic table for ATVs or UTVs; VEVOR's 1,500-pound lift lists those vehicle types.

Choose this for servicing a large motorcycle in a shop with compressed air and space for a 105.5-by-48-inch table. Its motorcycle focus and freight delivery are important planning considerations.

Listed on Amazon as: Black Widow Motorcycle Lift Table, Pneumatic, 1,500 lb, ProLift, 31.25"

#10

10. Orion Motor Tech Scissor Jack

• Load Capacity: 1100 lb.
• Material: Rubber, Steel
• Compatible with Vehicle Type: Motorcycle
• Dimensions: 1.57 x 10.24 x 4.33 in

Best for: Manual Cruiser and Dirt-Bike Lifting.

Why it ranks #10: This manually operated 1,100-pound jack is listed for motorcycles, not ATVs, and its 3.7-to-14.6-inch lift range is comparatively limited.

An 1,100-pound capacity gives the Orion Motor Tech scissor jack room for heavier motorcycles than many compact stands. Its wide deck lifts from 3.7 to 14.6 inches by T-handle or 3/8-inch socket and ratchet, offering a manual setup for maintenance without hydraulic or pneumatic operation.

The T-handle lets users raise the jack by hand, while the included 3/8-inch socket supports operation with a ratchet wrench. Its 3.7-to-14.6-inch range suits lower-height motorcycle lifting rather than tall shop-table access. The manufacturer recommends manual operation to extend screw life and prevent wear. A safety bar is included, and the listed vehicle compatibility is motorcycles, including cruisers and dirt bikes; this is a compact jack rather than a full-length platform.

Skip it if you need a work surface above 14.6 inches; VEVOR's 350-pound lift reaches 36 inches for lighter off-road bikes.

This suits motorcycle owners seeking a manual jack with a higher stated capacity and modest lift height for lower-level work. Consider the 14.6-inch ceiling if your repairs need a standing-height platform.

Listed on Amazon as: OMT 1100lb Motorcycle Scissor Lift Jack Wide Deck Motorbike Hoist Stand