Best Small Block Chevy Crate Engine for Different Builds

#1 · Best Overall

1. BluePrint 350 Crate Engine

• Weight: 575 lb

Best for: Dyno-tested 350 street builds.

Why it ranks #1: Its 350-cubic-inch engine delivers 390 hp and 410 lb-ft, is dyno-tested, and lists classic Chevy platform compatibility and ready-to-install intent.

Dyno testing paired with 390 horsepower and 410 lb-ft of torque gives this 350-cubic-inch BluePrint engine a concrete performance and preparation advantage. It is aimed at builders who want a tested small-block foundation for a classic Chevy restoration, street machine, or hot rod project.

The stated 390 horsepower and 410 lb-ft of torque make this a higher-output 350 option for street-oriented builds. BluePrint says each engine is fully dyno-tested before shipping, which gives the installer a validated engine rather than an untested assembly. The listing describes it as ready to install and names Camaro, Nova, Chevelle, and Chevy II compatibility; other chassis may require appropriate mounts. At 575 pounds, its listed weight is relevant when planning handling and installation.

Skip it if you need a lighter listed engine; Chevrolet Performance 19355722 is listed at 485 pounds, though its output is unspecified.

A hot-rod builder or classic Chevy restorer wanting a dyno-tested 350 with stated 390-horsepower output has a clear match here. Account for the 575-pound listed weight and appropriate mounts for non-Chevrolet chassis.

Listed on Amazon as: BluePrint Engines 350 Small Block Chevy Crate Engine, 390 HP, 410 lb-ft Torque, 350 Cubic Inch, Dyno-Tested

#2 · Best 350 Carbureted

2. BluePrint 350 Base Carbureted

Best for: 390-horsepower carbureted 350.

Why it ranks #2: It matches the 390 hp and 410 lb-ft output of the lead option and lists a carburetor, distributor, oil pan, timing cover, and valve covers.

A listed 390 horsepower and 410 lb-ft of torque distinguish this base-dressed, carbureted 350 for buyers targeting strong small-block output. The listing also names a carburetor, distributor, oil pan, timing cover, and valve covers, giving the build a substantial set of specified components.

This 350-cubic-inch engine combines its stated 390 horsepower and 410 lb-ft of torque with a 4-bolt-main, high-strength cast-iron block. The 1-piece rear main seal and mechanical fuel-pump provision provide concrete configuration details for the installation plan. Its listed carburetor, distributor, oil pan, timing cover, and valve covers help cover key engine components, while the drilled-and-tapped clutch linkage provision supports builds using that linkage arrangement.

Skip it if you prefer electronic fuel injection; BluePrint Engines BP3505CTFD supplies a Holley Sniper 2 EFI system.

This fits a builder seeking a high-output 350 with carbureted equipment and specified clutch-linkage and fuel-pump provisions. Choose it when those details suit the vehicle; the listing's base-dressed format is not the EFI alternative.

Listed on Amazon as: GM Small Block Compatible 350 c.i. Engine – 390 Horsepower – Base Dressed – Carbureted – BP3505CTC

#3 · Best EFI Option

3. BluePrint 350 Deluxe EFI

Best for: EFI-equipped 390-horsepower 350.

Why it ranks #3: This 350 delivers 390 hp and 410 lb-ft with a Holley Sniper 2 EFI system, offering a fuel-injected alternative to the carbureted 350s.

A genuine Holley Sniper 2 EFI system sets this 390-horsepower, 350-cubic-inch BluePrint engine apart from the listed carbureted 350s. It pairs that fuel-injection configuration with 410 lb-ft of torque, giving builders a clearly specified engine for projects calling for EFI and strong small-block output.

The 390-horsepower and 410 lb-ft ratings define the engine's output, while the Holley Sniper 2 EFI system identifies its fuel-injection setup. That distinction matters to a builder choosing an EFI configuration instead of a carburetor. The 9.2:1 compression ratio and hydraulic roller cam with .495-inch intake and .502-inch exhaust lift provide further planning specifications. The listing recommends 87+ octane fuel, a practical requirement to include in operating decisions.

Skip it if you require a carbureted 350; BluePrint Engines BP3505CTC is listed as base-dressed and carbureted.

This is a match for a builder wanting a 390-horsepower 350 with Holley Sniper 2 EFI and a stated 87+ octane recommendation. Ensure that fuel-system choice and compression specification align with the intended setup.

Listed on Amazon as: GM Small Block Compatible 350 c.i. Engine – 390 Horsepower – Deluxe Dressed – Fuel Injected

#4 · Best Carbureted 383

4. BluePrint 383 Deluxe Carbureted

• Weight: 475 lb

Best for: Carbureted 383 stroker power.

Why it ranks #4: Its 383-cubic-inch stroker produces 436 hp and 443 lb-ft, with aluminum heads and a hydraulic roller cam in a deluxe carbureted format.

The 383-cubic-inch displacement and 436 horsepower make this BluePrint engine a higher-output carbureted stroker option for a small-block build. Its 443 lb-ft of torque and hydraulic roller cam add concrete performance details for buyers planning around a dressed GM-compatible engine.

A 10:1 compression ratio and hydraulic roller cam with .544-inch intake and .555-inch exhaust lift define the engine's performance-oriented specification, while the listed 436 horsepower and 443 lb-ft of torque set clear output targets. Aluminum cylinder heads and a steel crankshaft with a 3.750-inch stroke contribute to the stated 383-cubic-inch combination. The deluxe-dressed, carbureted format distinguishes this version for buyers who want that fuel setup rather than an EFI configuration.

Skip it if you want a fuel-injected 383; BluePrint Engines BP38318CTFDK pairs 436 horsepower with a Holley Sniper 2 EFI system.

A builder seeking a 436-horsepower 383 with aluminum heads and a carbureted deluxe-dressed format should consider this version. The 10:1 compression ratio and chosen fuel system are important boundaries when matching it to the intended project.

Listed on Amazon as: BluePrint Engines GM Small Block Compatible 383 c.i. Engine – 436 HP – Deluxe Dressed – Carbureted

#5 · Best Dressed EFI

5. BluePrint 383 Deluxe EFI

Best for: EFI 383 with pulley kit.

Why it ranks #5: The deluxe 383 combines 436 hp and 443 lb-ft with Holley Sniper 2 EFI and a black pulley kit; its stated fuel recommendation is 91+ octane.

A genuine Holley Sniper 2 EFI system and black pulley kit distinguish this 436-horsepower, 383-cubic-inch BluePrint stroker. With 443 lb-ft of torque and a 91+ octane recommendation, its stated package and fuel requirement help buyers assess whether it suits their build.

The 383-cubic-inch engine's 436 horsepower and 443 lb-ft of torque set its output, while the Holley Sniper 2 EFI system specifies the fuel-injection approach. The included black pulley kit is a named package detail for the builder planning accessory-drive components. A 10:1 compression ratio and 91+ octane fuel recommendation are important operating considerations; the hydraulic roller cam and aluminum heads further describe the engine's configuration.

Skip it if you need a carbureted 383; BluePrint Engines BP38318CTC1D is listed as deluxe-dressed and carbureted.

Choose this 383 for a builder seeking EFI, the named black pulley kit, and the listed 436-horsepower output. Its 10:1 compression ratio and 91+ octane recommendation set a clear operating boundary.

Listed on Amazon as: GM Small Block Compatible 383 c.i. Engine – 436 Horsepower – Deluxe Dressed – Black Pulley Kit – Fuel Injected

#6

6. BluePrint 383 Base EFI

• Weight: 490 lb

Best for: Base-dressed EFI 383 stroker.

Why it ranks #6: It offers 436 hp and 443 lb-ft with fuel injection and a steel crank, appealing to buyers prioritizing stroker output in a base-dressed format.

A steel crankshaft paired with 436 horsepower and 443 lb-ft of torque gives this base-dressed 383 a specific performance profile. Its fuel-injected designation separates it from carbureted 383 listings, making it an option for builders seeking EFI in a GM-compatible small-block combination.

The 383-cubic-inch configuration is rated at 436 horsepower and 443 lb-ft of torque, while the 10:1 compression ratio and hydraulic roller cam specify key performance details. The steel crankshaft has a 3.750-inch stroke and works with 5.700-inch rods, defining the listed rotating assembly. Aluminum heads and a cast-iron block with 4-bolt mains are also identified. The fuel-injected, base-dressed format helps distinguish this engine when planning components and fuel-system choices.

Skip it if you require a named Holley Sniper 2 EFI system; BluePrint Engines BP38318CTFDK specifies that system.

This suits a builder seeking a base-dressed, fuel-injected 383 with a steel crank and stated 436-horsepower output. The supplied listing does not identify the EFI system, so that detail remains a significant selection boundary.

Listed on Amazon as: BluePrint Engines Compatible with GM Small Block, 383 c.i. Engine – 436 HP – Base Dressed – Fuel Injected

#7

7. BluePrint 383 Long Block

• Weight: 478 lb

Best for: 383 long-block foundation.

Why it ranks #7: This 383 long block lists 436 hp and 443 lb-ft, aluminum heads, and a steel crank, but its format calls for more build planning.

The long-block format is the defining choice here: this BluePrint 383 is rated at 436 horsepower and 443 lb-ft, with aluminum heads and a steel crankshaft. It gives builders a specified engine foundation while leaving the product format clearly distinct from dressed alternatives.

The 383-cubic-inch engine's 436 horsepower and 443 lb-ft of torque provide stated output figures, and its 10:1 compression ratio helps define the combination. A hydraulic roller cam with .544-inch intake and .555-inch exhaust lift and a steel crankshaft with a 3.750-inch stroke add useful planning specifics. Because the product is listed as a long block, buyers should account for that format when organizing the remaining components and installation workflow.

Skip it if you want a listed EFI system; BluePrint Engines BP38318CTFDK is a 436-horsepower 383 with Holley Sniper 2 EFI.

A builder assembling a 383 project around a long-block foundation can use the stated output, cam, and steel-crank specifications to plan. Choose another format if you specifically need listed EFI or deluxe-dressed components.

Listed on Amazon as: BluePrint Engines GM Small Block Compatible 383 c.i. Engine – 436 HP – Long Block

#8

8. BluePrint 350 Deluxe Carbureted

Best for: Carbureted deluxe 350 builds.

Why it ranks #8: The 350 produces 341 hp and 371 lb-ft and includes a carburetor, distributor, oil pan, timing cover, and valve covers in a deluxe setup.

A deluxe-dressed carbureted configuration combines a listed 341 horsepower and 371 lb-ft of torque with included essentials such as the carburetor, distributor, oil pan, timing cover, and valve covers. That package suits a builder seeking a 350-cubic-inch Chevy engine with key installation components already present.

The 350-cubic-inch engine's 341 horsepower and 371 lb-ft of torque provide defined output for planning a small-block street build. Its carburetor, distributor, oil pan, timing cover, and valve covers are identified as included, reducing the need to source those named parts separately. A 4-bolt-main cast-iron block and 1-piece rear main seal add useful construction details for project planning. The drilled-and-tapped clutch linkage and mechanical fuel-pump provision address specific setup needs.

Skip it if you want fuel injection instead of a carburetor; BluePrint BP3505CTFD includes a Holley Sniper 2 EFI system.

Choose this for a carbureted 350 project where the named deluxe components and clutch-linkage provision suit the build. Its 341-horsepower rating is below the 390-horsepower BluePrint 350 options, so match output to your goal.

Listed on Amazon as: GM Small Block Compatible 350 c.i. Engine – 341 Horsepower – Deluxe Dressed – Carbureted – BP350CTCD

#9

9. BluePrint 350 Base Carbureted

• Weight: 534 lb

Best for: Moderate-output carbureted 350.

Why it ranks #9: Its 341 hp and 371 lb-ft suit a lower-output 350 build; the base-dressed carbureted format has a 9.2:1 compression ratio and hydraulic roller cam.

A 9.2:1 compression ratio paired with a hydraulic roller cam distinguishes this 341-horsepower, 350-cubic-inch BluePrint engine. Its base-dressed carbureted format suits buyers who want defined small-block specifications and 371 lb-ft of torque without choosing one of the listed 390-horsepower variants.

The 341-horsepower and 371 lb-ft ratings give a builder concrete output figures for a 350-cubic-inch project. A hydraulic roller cam with .477-inch intake and .471-inch exhaust lift, plus 202/212-degree duration at .050 inch, makes the cam specification clear for planning. The 9.2:1 compression ratio and aluminum heads further identify the combination. Its cast crankshaft and base-dressed carbureted format distinguish it from higher-output or fuel-injected listings.

Skip it if you need the higher listed 350 output; BluePrint Engines BP3505CTC is rated at 390 horsepower and 410 lb-ft.

Consider this for a carbureted small-block build where 341 horsepower, a 9.2:1 compression ratio, and the stated roller cam fit the plan. Its output rating is the key boundary versus stronger 350 options.

Listed on Amazon as: BluePrint Engines GM Small Block Compatible 350 c.i. Engine – 341 HP – Base Dressed – Carbureted

#10

10. Chevrolet Performance Crate Engine

• Weight: 485 lb

Best for: Chevrolet-branded crate-engine option.

Why it ranks #10: It is identified as a Chevrolet Performance crate engine, but the supplied listing does not specify displacement, horsepower, torque, or included components.

Chevrolet branding is the clearest differentiator for this crate engine, giving buyers seeking a Chevrolet Performance-labeled product a direct option to investigate. The supplied listing identifies model 19355722 and a package weight of 485 pounds, but provides no displacement, horsepower, torque, or engine configuration details.

The Chevrolet Performance name and model 19355722 identify the product, while its listed 485-pound weight and package dimensions of 43.5 by 34.38 by 31.38 inches provide handling and space-planning information. Those figures can help prepare for receiving and moving the package, but they do not establish engine output or configuration. The supplied details also give no compatibility or included-component information, so this listing alone offers limited guidance for matching the engine to a particular build.

Skip it if you need stated output and displacement; BluePrint Engines BP3505CTC identifies a 350-cubic-inch engine with 390 horsepower.

This suits a buyer specifically seeking the Chevrolet Performance 19355722 listing and able to research the fit and specification details separately. Its listed dimensions and weight help logistics, but the supplied data cannot establish performance or compatibility.

Listed on Amazon as: Chevrolet Performance 19355722 Crate Engine