Best Handlebars For Street Glide: Compare Rise and Wiring

#1 · Best Overall

1. Mofun 12 Pre-Wired

• Dimensions: 36.5"L x 12"W
• Dimensions L x W: 36.5"L x 12"W
• Material: Alloy Steel

Best for: Mid-Rise Prewired Touring Bar.

Why it ranks #1: Lists Street Glide FLHX fitment and pre-wired handlebars for compatible touring models, with a 12-inch rise, alloy-steel construction, and a one-year warranty.

Prewired construction paired with a 12-inch rise makes this Mofun bar a middle-height option for listed 2014–2023 Touring models. Its fitment names Street Glide, Street Glide Special, and several Electra Glide variants, while the chrome alloy-steel bar measures 36.5 inches long.

The 12-inch rise gives buyers a specific height to compare with taller or shorter alternatives, and the prewired construction addresses internal wiring during installation. Mofun lists Street Glide FLHX and Street Glide Special FLHXS fitment for 2014–2023, plus Electra Glide and Ultra Limited applications with their own year ranges. That detailed model coverage helps narrow compatibility, but the exact variant and year matter because the listed ranges differ across Touring models.

Skip it if you want a lower-rise handlebar; this Mofun option has a 12-inch rise.

A rider with a listed 2014–2023 Street Glide or covered Touring variant seeking a chrome, prewired bar can consider this 12-inch-rise option. Check the specific year range for the exact model before choosing it.

Listed on Amazon as: Mofun 12" Handlebars Pre-wired Ape Hangers Fit for Harley Touring 2014-2023

#2 · Best Tall Rise

2. Prewired 14 Chrome

• Dimensions: 36.1"L x 36.1"W
• Dimensions L x W: 36.1"L x 36.1"W
• Material: Carbon Steel

Best for: Later Touring Wiring Upgrade.

Why it ranks #2: Specifically lists Street Glide fitment and a 14-inch rise, with pre-wired CAN-Bus wiring; its stated exclusions make model verification especially important.

A prewired CAN-Bus harness with a guiding line is the practical draw of this 14-inch ape hanger, helping simplify the wire-threading step. Prewired lists fitment for 2014–2023 Street Glide models, while explicitly excluding 2023 CVO and 2024-and-newer models.

The 14-inch rise establishes a taller ape-hanger profile, and the 1.25-inch carbon-steel bar gives the handlebar its specified tube diameter. Its CAN-Bus wiring and guiding line address internal wire routing, which can make that part of installation more straightforward than threading without a guide. The fitment list includes 2014–2023 Street Glide, Electra Glide, and Ultra Limited models, but the stated 2023 CVO and 2024-up exclusions narrow that coverage.

Skip it if you ride a 2023 CVO or 2024-up model; the listed fitment excludes those bikes.

This suits riders of listed 2014–2023 Street Glide models who want a tall 14-inch profile and prewired CAN-Bus routing. Its model-year boundary matters: the listing excludes 2023 CVO and 2024-and-newer bikes.

Listed on Amazon as: 14" Handlebars 1.25" Fat 2014-2023 Street Glide Ape Hanger, Chrome

#3 · Newer-Model Fit

3. Mofun 12 Zero-Wire

• Dimensions: 34"L x 34"W
• Dimensions L x W: 34"L x 34"W

Best for: Recent Street Glide Wire Routing.

Why it ranks #3: Its compatibility list includes newer Street Glide models and it is described as a zero-wire-pulling pre-wired design, though the listed specs provide fewer construction details.

Its zero-wire-pulling design is the defining feature of this 12-inch Mofun bar, aimed at simplifying installation on newer listed Street Glide models. Mofun names 2024–2026 Street Glide fitment and several related 2023.5–2026 models, with a gloss-black finish.

The zero-wire-pulling approach and fully prewired construction address the internal wiring step, making this listing especially relevant to riders who want to avoid pulling wires through the bar. A 12-inch rise provides the stated handlebar height, while the 5.5-inch clamp-area width and 1-inch clamp diameter specify the mounting area. Mofun's fitment list focuses on newer batwing-fairing models, including Street Glide 2024–2026 and CVO Street Glide 2023.5–2025, so older applications are not listed.

Skip it if you have an older Street Glide; the listed standard Street Glide range begins with 2024 models.

A newer Street Glide owner seeking a 12-inch bar and a zero-wire-pulling prewired setup may find this focused on the right application. Its detailed fitment centers on 2023.5–2026 models, so older bikes fall outside the list.

Listed on Amazon as: Mofun 12" Zero Wire Pulling Pre-Wired Handlebar Fit for Street Glide

#4

4. Mofun 14 Pre-Wired

• Dimensions: 36.5"L x 14"W
• Dimensions L x W: 36.5"L x 14"W
• Material: Alloy Steel

Best for: Tall Prewired Touring Bar.

Why it ranks #4: Lists Street Glide, Special, and ST fitments alongside a 14-inch rise, pre-wired construction, alloy steel, and a one-year warranty.

The 14-inch rise and prewired construction define this Mofun handlebar for riders seeking a tall profile without starting wire routing from bare bars. Its stated compatibility covers numerous 2014–2023 Touring models, including Street Glide, Street Glide Special, and Street Glide ST.

The 1.25-inch bar tubing and 14-inch rise establish the main sizing and profile, while prewired construction addresses electrical routing during installation. Mofun lists fitment for Street Glide FLHX from 2014–2023, Street Glide Special FLHXS from 2014–2023, and Street Glide ST from 2022–2023, among other Touring models. The broad model list is useful for narrowing compatibility, but the exact bike variant and year remain important checks.

Skip it if you want a lower-rise bar; this Mofun handlebar has a 14-inch rise.

This fits a rider seeking a tall, prewired chrome bar for a listed 2014–2023 Street Glide variant or other covered Touring model. The 14-inch rise is the key boundary for buyers weighing handlebar height.

Listed on Amazon as: Mofun 14" Ape Hanger Pre-wired Handlebars Fit for Harley Touring 2014-2023

#5 · Heated-Grip Wiring

5. Eumti 12 Pre-Wired

• Dimensions: 12"L x 17"W
• Dimensions L x W: 12"L x 17"W
• Material: Carbon Steel

Best for: Heated-Grip Wiring Included.

Why it ranks #5: Provides a 12-inch rise and lists heated-grip, TBW, and CAN-Bus wiring; its fitment description includes Street Glide models but needs careful model checking.

Preinstalled CAN-Bus, TBW, and heated-grip wire harnesses set this 12-inch-rise Eumti bar apart for compatible Touring bikes. Its listing describes a plug-and-play design and names 2016–2023 Street Glide models, plus the 2013 CVO, among its supported applications.

The 1.25-inch diameter, 1-inch clamp area, and 17-inch base width give the bar a specific mounting footprint to compare with the bike. Preinstalled CAN-Bus and TBW wiring addresses internal routing, and the heated-grip harness is an explicit benefit for riders using that equipment. Eumti also calls the design plug-and-play and includes seam rippers and solder-seal connectors, while fitment is listed for 2016–2023 Street Glide models and the 2013 CVO.

Skip it if you ride a 2014–2015 Street Glide; those model years are not in the listed Street Glide range.

This is a fit for riders of listed 2016–2023 Street Glides or the named 2013 CVO who want heated-grip wiring included. Verify the exact model against the specific years stated in the fitment list.

Listed on Amazon as: 12" Rise Pre-Wired Meathook Ape Hangers Handlebars 1 1/4" Bagger Bar

#6

6. Dominator 14 Meathook

• Dimensions: 36"L x 6"W
• Dimensions L x W: 36"L x 6"W
• Material: Alloy Steel

Best for: Stock-Cable Compatibility Seeker.

Why it ranks #6: Lists Street Glide compatibility and a 14-inch pre-wired meathook bar, with internal wiring provisions and TBW notching for compatible applications.

Dominator lists compatibility with stock cables and controls on 2015–2023 Road Glides, a specific detail for riders considering a 14-inch prewired meathook bar. The same listing covers 2015–2023 Street Glide models and describes internal wiring passages with TBW notches.

The 1.25-inch alloy-steel bar has a 14-inch rise, specifying a tall profile for the listed bagger applications. Its internal wiring passages and TBW notches are intended to make wiring installation more direct, while the stated stock-cable and control compatibility specifically applies to 2015–2023 Road Glides. Separately, the product lists Street Glide, Electra Glide, and Ultra Limited compatibility for 2015–2023, so Street Glide buyers should use that model-year fitment rather than assume the Road Glide cable claim applies.

Skip it if you need confirmed stock-cable compatibility for a Street Glide; the listing specifies that claim for Road Glides.

This suits a rider seeking a 14-inch prewired bar for a listed 2015–2023 Street Glide or Road Glide. Note that the stock-cable and control statement is specifically about Road Glides.

Listed on Amazon as: Dominator Industries 1 1/4" PRE-WIRED 14" Meathook Bar Ape Hangers Handlebars Compatible with 2014-2022 Harley Davidson Bagger Electra & Street Glide Special Ultra Limited & Low (Gloss Black)

#7

7. Mofun 12 Bagger

• Dimensions: 35.5"L x 12"W
• Dimensions L x W: 35.5"L x 12"W
• Material: Alloy Steel

Best for: Wide Touring Bagger Bar.

Why it ranks #7: Lists Street Glide compatibility and gives useful geometry: 12-inch rise, 9-inch pullback, 35.5-inch width, and a 1.25-inch bar diameter.

A 9-inch pullback paired with a 12-inch rise gives this Mofun bar a defined reach-and-height profile for compatible Touring bikes. Its listed dimensions and batwing-fairing fitment span Street Glide and other Touring models, while polished, rust-proof plating addresses the bar's exterior finish.

The 1.25-inch tube, 35.5-inch end-to-end width, and 14-3/8-inch center width provide specific sizing information for evaluating the cockpit layout. A 9-inch pullback sets the stated sweep, while the 12-inch rise defines the vertical profile. Mofun also specifies triple polishing, smooth tube interiors, and plating tested in a 48-hour neutral salt spray, details relevant to finish quality and corrosion resistance during ownership.

Skip it if you want a lighter listed handlebar; this one weighs 5.1 kg.

A Street Glide or other listed batwing-fairing Touring owner wanting 12 inches of rise and 9 inches of pullback can assess this bar by its detailed dimensions. Its 5.1 kg listed weight is a relevant trade-off.

Listed on Amazon as: Mofun 12" Rise Bagger Handlebar Ape Hanger Fit for Harley Touring 1986-2023

#8

8. Prewired 12 Chrome

• Dimensions: 36.5"L x 8.7"W
• Dimensions L x W: 36.5"L x 8.7"W
• Material: Carbon Steel

Best for: Early Touring Prewired Upgrade.

Why it ranks #8: Targets earlier Street Glide models with a 12-inch rise, 1.25-inch diameter, and pre-wired design; the listing excludes heated-grip options.

A complete prewired TBW and CAN-Bus harness is the defining feature of this 12-inch-rise bar, helping streamline electrical routing during an upgrade. Prewired lists fitment for 2008–2013 Street Glide models and several other Touring bikes, with a specific exclusion for heated-grip options.

The 1.25-inch carbon-steel tubing and 12-inch rise give this bar its substantial ape-hanger profile, while the 5.4-inch clamping-area width and 17.3-inch base width specify the mounting geometry. Its supplied prewiring includes TBW and CAN-Bus harnesses, which can simplify routing compared with starting with bare bars. The stated fitment covers 2008–2013 Street Glide, Electra Glide, and Ultra Limited models, but the heated-grip exclusion is important when checking the bike's equipment.

Skip it if you need handlebars for heated grips; this listing explicitly excludes that option.

For a 2008–2013 Street Glide owner seeking a 12-inch-rise chrome ape hanger with TBW and CAN-Bus wiring already installed, this is a focused option; check the stated heated-grip exclusion before choosing it.

Listed on Amazon as: 1 1/4" Fat 12" Rise 2008-2013 Street Glide Handlebars, Chrome

#9 · Lowest Rise

9. Mofun 10 Chrome

• Dimensions: 38.58"L x 15.19"W
• Dimensions L x W: 38.58"L x 15.19"W
• Material: Alloy Steel

Best for: Lower-Rise Touring Setup.

Why it ranks #9: Its 10-inch rise is the shortest listed, and it gives 10-inch pullback and 36.5-inch overall width for riders considering a lower profile.

A 10-inch rise and 10-inch pullback give this Mofun handlebar a lower stated rise than the 12- and 14-inch options in this roundup. It lists broad batwing-fairing Touring compatibility, including Street Glide models, and uses a 1.25-inch bar tube.

The 10-inch rise and 10-inch sweep describe the bar's vertical height and pullback, helping buyers compare cockpit geometry before choosing a replacement. Mofun also specifies a 36.5-inch overall width, 17.1-inch center width, and 1-inch grip-area diameter, which clarify the bar's dimensions. The listing describes a steel pipe construction and states compatibility with batwing-fairing Touring models, including Street Glide FLHX; check the listed bike year and variant when assessing fit.

Skip it if you want a taller ape-hanger rise; this Mofun bar is specified at 10 inches.

This suits a Touring rider looking for a 10-inch-rise bar with a defined 10-inch pullback and listed Street Glide compatibility. Its lower rise is the central fit consideration for buyers seeking a taller profile.

Listed on Amazon as: Mofun 10" Handlebar Fit for Harley Touring 1986-2023 with Batwing Fairng

#10

10. Eumti 14 Pre-Wired

• Dimensions: 14"L x 17"W
• Dimensions L x W: 14"L x 17"W

Best for: Early-Model Black Prewired Bar.

Why it ranks #10: The 14-inch pre-wired bar is listed for earlier Street Glide fitments, but its narrower stated model range limits its usefulness across the category.

A 14-inch rise with preinstalled TBW and CAN-Bus harnesses makes this Eumti bar a tall, wiring-ready option for listed 2008–2013 Touring bikes. Its gloss-black finish and included seam-ripper and solder-seal connector kits distinguish the supplied setup.

The 1.25-inch bar diameter, 1-inch clamp-area diameter, and 17-inch base width provide useful measurements for assessing the cockpit and mounting layout. Preinstalled TBW and CAN-Bus harnesses reduce the need to route those wires through a bare bar, while the listing describes trimming existing TBW wires and connecting them. The stated fitment includes 2008–2013 Street Glide, Electra Glide Standard, and Ultra Limited models, so later bikes are outside the listed range.

Skip it if you ride a Street Glide outside 2008–2013; those model years are the listed fitment range.

A rider with a listed 2008–2013 Street Glide seeking a 14-inch gloss-black bar and preinstalled wiring may value the included connector tools. Check the exact model year against Eumti's stated range.

Listed on Amazon as: 14" Rise Pre-Wired Ape Hangers Handlebars 1 1/4" Fat 1" Clamp Meathook Monkey Bar for Harley Touring 2008-2013 Harley Street Glide FLHX Electra Glide Standard FLHT Ultra Limited FLHTK