Best Struts For Honda Crv: Complete Kits by Model Year

#1 · Best Overall

1. Monroe 1000283VK

• Compatible with Vehicle Type: Car
• Material Type: Alloy Steel

Best for: Four-corner AWD repair.

Why it ranks #1: Specifies 2012–2014 CR-V AWD fitment and bundles two front plus two rear Quick-Strut assemblies with the hardware for a four-corner repair.

A four-piece Quick-Strut bundle covers both axles on specified 2012–2014 Honda CR-V AWD models, enabling a coordinated four-corner suspension repair. Monroe includes two front and two rear assemblies, so buyers sourcing a complete set can address the front and rear together rather than piecing those positions together separately.

The bundle includes all necessary hardware, which gives installers the components needed for the listed four-corner repair in one kit. Its stated fit is limited to 2012, 2013, and 2014 CR-V AWD models, making drivetrain and model year important screening details before ordering. Monroe identifies alloy steel as the material and says its products are engineered and tested to durability standards and vehicle-tested for fit. The package is for front and rear replacement, not a front-only refresh.

Skip it if you own a 2002–2006 CR-V; Monroe 1000112VK covers those model years instead.

A fit for owners of 2012–2014 Honda CR-V AWD models planning a complete front-and-rear strut replacement. Its four-corner coverage suits a coordinated repair, but it is not listed for other years or for CR-Vs without AWD.

Listed on Amazon as: Monroe 1000283VK4 pc Front and Rear Quick-Strut Suspension Strut Assembly Set for Honda CR-V AWD

#2 · Best 2012–2014 Set

2. Complete Struts 2012–2014 Set

• Compatible with Vehicle Type: Car
• Material Type: Rubber, Steel, Possibly other metals
• Weight: 72 lb

Best for: Complete four-strut replacement.

Why it ranks #2: Covers 2012–2014 CR-V with two front and two rear complete assemblies; it also includes a one-year manufacturer warranty.

Four fully assembled front and rear struts let this Complete Struts kit replace the complete set without rebuilding the old assemblies, enabling a bundled suspension refresh for a 2012–2014 Honda CR-V. The package contains two assemblies for each axle, rather than limiting coverage to the front or rear.

Because the kit includes two front and two rear complete assemblies, it supports a four-corner replacement and avoids rebuilding the old struts. The stated vehicle fit is restricted to 2012, 2013, and 2014 CR-V models, so buyers should treat model year as a key compatibility boundary. The supplied guidance also recommends inspecting control-arm bushings and ball joints for wear and notes that an alignment is needed after installation to restore factory suspension configuration.

Skip it if you need a kit listed for 2002–2006 models; Complete Struts 4-AAFF7-ACA4C-001 covers those years.

Choose this set for a 2012–2014 CR-V owner replacing struts at all four corners with complete assemblies. Plan for a post-installation alignment and inspect related bushings and ball joints as the supplied guidance recommends.

Listed on Amazon as: COMPLETESTRUTS – Front & Rear Complete Strut Assemblies with Coil Springs Replacement for 2012-2014 Honda CR-V – Set of 4

#3 · Best 2002–2006 Set

3. Monroe 1000112VK

• Compatible with Vehicle Type: Car
• Material Type: Alloy Steel

Best for: Older CR-V four-corner kit.

Why it ranks #3: Matches 2002–2006 CR-V applications and supplies two front and two rear Quick-Strut assemblies with necessary hardware.

Two front and two rear Monroe Quick-Struts give this bundle coverage for a four-corner repair on 2002–2006 Honda CR-V models, enabling replacement across both axles in one kit. Included hardware supports the installation workflow, so buyers do not have to source those necessary pieces separately.

The four-piece set supplies front and rear assemblies together, making it relevant when the repair covers the full vehicle rather than one axle. Monroe says the necessary hardware is included for installation and describes its products as engineered and tested to durability standards and vehicle-tested for fit. Alloy steel is the listed material. Compatibility is stated for 2002–2006 CR-V models, so this kit's model-year range distinguishes it from newer-generation options.

Skip it if you have a 2012–2014 CR-V AWD; Monroe 1000283VK4 is listed for those models.

This Monroe bundle suits owners of a 2002–2006 Honda CR-V planning front-and-rear strut replacement and wanting hardware included. Its central boundary is the listed model-year range, so it is not the choice for newer CR-Vs.

Listed on Amazon as: Monroe 1000112VK 4 pc Front and Rear Quick-Strut Suspension Strut Assembly Set for 2002-2006 Honda CR-V

#4

4. Complete Struts 2002–2006 Set

• Compatible with Vehicle Type: Car
• Material Type: Rubber
• Weight: 72 lb

Best for: Four-corner kit for 2002–2006.

Why it ranks #4: Provides four complete assemblies for 2002–2006 CR-Vs, but excludes England production models with VIN beginning SHSRD.

Two front and two rear quick complete strut assemblies give this Complete Struts kit four-corner coverage for 2002–2006 Honda CR-V models, enabling a full set replacement without rebuilding the old struts. Its fitment has a clear exception: England production models with VIN prefix SHSRD are excluded.

The set contains four fully assembled front and rear struts, which avoids rebuilding old units and lets buyers address both axles in one repair. Complete Struts lists compatibility with 2002–2006 CR-Vs but explicitly excludes England production models with VIN 'SHSRD,' an important boundary to screen. The supplied installation guidance recommends checking control-arm bushings and ball joints for compromised components and notes that an alignment is needed after replacing the struts.

Skip it if you have a 2002–2006 CR-V AWD and want a Monroe kit; Monroe 1000112VK lists those model years.

This set suits owners of eligible 2002–2006 CR-Vs replacing struts at all four corners. Screen out England production vehicles with VIN prefix SHSRD, inspect related suspension components, and plan for the recommended alignment.

Listed on Amazon as: COMPLETESTRUTS – Front & Rear Complete Strut Assemblies with Coil Springs Replacement for 2002-2006 Honda CR-V – Set of 4

#5 · Best Kit With Links

5. Detroit Axle 80129-8

• Weight: 66 lb

Best for: Struts plus sway-bar links.

Why it ranks #5: Fits 2007–2011 CR-V and combines four strut and coil-spring assemblies with four front and rear sway bar links.

Four complete strut assemblies arrive with four sway-bar links, enabling a broader suspension parts replacement on 2007–2011 Honda CR-V models. Detroit Axle says the struts are ready for installation without additional work or special tools, a useful detail for buyers seeking more than struts alone.

Alongside front and rear struts with coil springs, the kit includes four front and rear sway-bar links, combining two categories of suspension parts in one order. Detroit Axle says the assemblies are ready for installation without additional work or special tools, which can simplify the parts-preparation stage. Its listed fitment is limited to 2007–2011 CR-Vs. The company also says products undergo impact, wear, and fatigue testing, while the kit's eight pieces make it broader than a strut-only replacement.

Skip it if you only need struts for a 2012–2014 CR-V; Complete Struts 4-AAF0C-AC087-001 lists four assemblies for those years.

This kit fits owners of 2007–2011 CR-Vs who want struts and sway-bar links together and value assemblies described as ready to install without special tools. It is broader than a strut-only parts list.

Listed on Amazon as: Detroit Axle – 8pc Suspension Kit for 2007-2011 Honda CR-V

#6

6. OREDY 2007–2011 Set

• Weight: 71.4 lb

Best for: Preassembled 2007–2011 set.

Why it ranks #6: Lists 2007–2011 CR-V fitment and includes four pre-assembled front and rear strut assemblies for left and right sides.

Four pre-assembled, quick-install-ready struts cover the front and rear of 2007–2011 Honda CR-Vs, enabling a complete replacement without assembling the units from separate listed parts. OREDY identifies left and right assemblies for both ends, making the four-corner coverage clear for shoppers planning a full set.

The kit includes four front and rear, right and left strut assemblies, and OREDY describes them as fully pre-assembled for quick installation. That can reduce assembly steps before fitting compared with sourcing component parts separately. The stated fitment is 2007–2011 CR-V, and the listing says the struts meet OE standards and are intended to improve ride comfort. The listed warranty is lifetime; fitment and the requirement for four assemblies should guide the purchase decision.

Skip it if you need sway-bar links included with struts; Detroit Axle 80129-8 combines both for 2007–2011 CR-Vs.

Choose this OREDY set for a 2007–2011 CR-V owner seeking pre-assembled struts at all four corners. Its year range is the key fit boundary, and buyers needing sway-bar links must source those separately.

Listed on Amazon as: OREDY Front & Rear Struts Replacement for 2007-2011 Honda CR-V – Set of 4

#7

7. AUTOMUTO 2002–2006 Set

• Compatible with Vehicle Type: Car
• Material Type: Alloy Steel, Rubber
• Weight: 79.4 lb

Best for: Component-rich older-model set.

Why it ranks #7: Lists 2002–2006 CR-V fitment and complete front and rear assemblies with struts, springs, mounts, boots, and bumpers.

Each AUTOMUTO assembly includes a strut, coil spring, mount, boot, bumper kit, spring seat, and isolator, enabling replacement of a broad set of front and rear suspension components together. The listing identifies fitment for 2002–2006 Honda CR-V models, giving older-model owners a specific year range to screen.

The component list goes beyond the strut and spring to name mounts, boots, bumper kits, spring seats, and isolators, which lets buyers see what is included in each complete assembly. AUTOMUTO states that the assemblies are intended to reduce road-surface vibration and improve driving stability. Its listed fitment spans 2002–2006 CR-Vs, while alloy steel and rubber are the specified materials. Check the year range against the vehicle before making this the basis of a repair plan.

Skip it if you want a set explicitly listed as two front and two rear Quick-Struts; Monroe 1000112VK offers that for 2002–2006 CR-Vs.

A fit for 2002–2006 CR-V owners looking for assemblies with numerous named components, including mounts, boots, and isolators. The listing does not specify engine or drivetrain details, so those vehicle particulars remain a boundary to assess.

Listed on Amazon as: AUTOMUTO Strut Spring Assembly Front and Rear Fit for Honda CR-V 2002-2006

#8 · Best Newer-Model Coverage

8. TRQ SKA34276

• Compatible with Vehicle Type: Car
• Weight: 56.3 lb

Best for: DIY video-supported suspension kit.

Why it ranks #8: Covers 2017–2019 and specified 2020–2022 trims, with two front strut-and-spring assemblies and two rear shocks.

TRQ pairs two front strut-and-spring assemblies with two rear shock absorbers, enabling a four-piece suspension replacement supported by the brand's catalog of DIY repair videos. Its fitment listing covers 2017–2019 CR-Vs and specified 2020–2022 trims, giving shoppers explicit vehicle boundaries to check.

The kit combines front strut-and-spring assemblies with rear shocks, so it covers both axles while identifying the different components used at each end. TRQ's DIY video catalog may help owners follow a repair workflow, and the product listing names 2017–2019 CR-Vs plus EX, EX-L, LX, Touring, and Special Edition trims for specified 2020–2022 models. Those year and trim limits matter when checking fit; the package does not describe four complete strut assemblies.

Skip it if you want complete front and rear strut assemblies; Complete Struts 4-AAF0C-AC087-001 lists four assemblies for 2012–2014 CR-Vs.

A relevant option for DIY-minded owners of listed 2017–2022 CR-V configurations who need front springs and struts plus rear shocks. Check the specified year and trim coverage, and account for the distinct rear components.

Listed on Amazon as: TRQ Front and Rear Complete Strut Assembly & Shock Absorber Kit Complete

#9

9. MAC 193025

Best for: 2017–2022 mixed-axle kit.

Why it ranks #9: Lists 2017–2022 CR-V fitment and pairs front complete spring struts with rear complete shocks and shock mounts.

This MAC kit pairs complete front spring struts with rear shock assemblies, enabling a mixed-component refresh across both axles on listed 2017–2022 Honda CR-V models. The front assemblies include springs and upper mounts, while the rear side is described as complete shocks with shock mounts.

The listed contents distinguish the front and rear jobs: complete spring struts for the left and right front, plus rear shock absorbers with shock mounts. That pairing gives buyers a single kit for both axles rather than front struts alone. MAC lists CR-V model years 2017 through 2022 and says its parts are inspected and manufactured to meet fit, form, and function requirements. The listing also specifies an improved variable-rate spring for the front-left assembly.

Skip it if you need a kit with listed trim-level coverage for 2020–2022; TRQ SKA34276 names its covered trims.

Consider this MAC set for a 2017–2022 CR-V owner seeking front spring-strut assemblies and rear shocks with mounts in one purchase. Note the different front and rear component types when planning the repair.

Listed on Amazon as: Front Complete Struts & Rear Shocks Assembly Replacement Parts For Honda CR-V CRV 2017 2018 2019 2020 2021 2022

#10

10. A-Premium APSA0666

• Compatible with Vehicle Type: Car
• Material Type: Metal

Best for: Front-axle spring assembly.

Why it ranks #10: Fits 2007–2014 CR-V 2.4L applications and includes front driver and passenger complete struts, but does not cover the rear.

Included coil springs, mounts, and dust shields make this A-Premium pair a more complete front-axle option than struts alone, enabling replacement of several front suspension components together. The set covers the driver and passenger sides and is listed for 2007–2014 Honda CR-V models with a 2.4L L4 engine.

The two assemblies include a strut, coil spring, mount, and dust shield, so buyers can replace those named parts at both front positions as a set. A-Premium lists fitment for 2007–2014 CR-V models with the 2.4L L4, which makes engine and year key compatibility checks. The listed body and extended lengths provide installation dimensions, while the front-left and front-right placement clarifies that the kit does not supply rear suspension parts.

Skip it if you need all four corners in one order; OREDY Front & Rear Struts covers 2007–2011 CR-Vs.

A practical choice for a 2007–2014 CR-V 2.4L L4 owner replacing both front assemblies and wanting springs, mounts, and dust shields included. Look elsewhere if the job also calls for rear suspension parts.

Listed on Amazon as: A-Premium Front Complete Strut Assemblies with Coil Springs, Set of 2