Best Wheel Spacers For Toyota Tacoma: 10 Options Compared

#1 · Best Overall

1. KSP 1.25-Inch Spacers

• Weight: 5 lb

Best for: Forged 1.25-inch Tacoma upgrade.

Why it ranks #1: Lists Tacoma fitment and a moderate 1.25-inch thickness, with forged 6061-T6 aluminum and 24 lug nuts included for a complete four-spacer set.

KSP’s forged 6061-T6 aluminum construction is the defining feature of this 1.25-inch spacer set, pairing a lightweight material with a corrosion-resistant anodized finish. The 6×139.7mm pattern and included lug nuts give Tacoma owners a specified hardware package for moving their wheels outward, while the listing also names 4Runner fitment.

The 1.25-inch thickness provides a middle ground between a subtle spacing change and the two-inch options in this roundup. KSP says its in-house engineers CNC-machine the spacers to measured OEM hub and bore dimensions, supporting a more precise fit. Heat-treated, hardened 10.9-grade Geomet bolts are specified to resist breaking or stripping, and the four spacers, 24 lug nuts, and instruction manual put the key installation components together in one package.

Skip it if you need a two-inch wheel offset; dynofit’s 2-inch 6×5.5 spacers provide that greater thickness.

Tacoma and 4Runner owners seeking a forged, 1.25-inch spacer set with supplied lug nuts may appreciate KSP’s measured-hub approach. Check that the vehicle’s bolt pattern and application match the listing before choosing it.

Listed on Amazon as: KSP 1.25 inch Wheel Spacers for Tacoma 4Runner 1996-2023, 6×5.5 Wide Spacer

#2 · Best Hub-Centric Fit

2. Richeer 1-Inch Spacers

• Weight: 11.97 lb

Best for: One-inch hub-centric Tacoma set.

Why it ranks #2: Specifies 1995–2023 six-lug Tacoma fitment, a 106mm center bore, 6×139.7mm pattern, and a one-inch thickness.

Richeer specifies a 106mm center bore on this one-inch, hub-centric spacer set, giving Tacoma owners a clear bore dimension to compare with their vehicle. The listing covers 1995–2023 six-lug Tacomas and also names 4Runner, Tundra, and FJ Cruiser applications, with four spacers included by specification.

The one-inch thickness suits buyers seeking a less pronounced spacing change than the 1.5- and two-inch choices in this roundup. Its 6×139.7mm vehicle and wheel bolt patterns, 106mm center bore, and 12×1.5 studs give several concrete fit dimensions to check together. Richeer specifies Grade 12.9 studs with 1000MPa tensile strength and recommends 70–80 ft-lb torque, helping buyers plan hardware checks and installation around the supplied guidance.

Skip it if you have a five-lug Tacoma; the listed compatibility is specifically for six-lug models.

This Richeer set fits the brief for six-lug Tacoma owners wanting one-inch spacers and clearly stated bore, stud, and torque specifications. Confirm those dimensions against the intended vehicle and wheel setup before installation.

Listed on Amazon as: Richeer 1 inch 6×5.5 Hub Centric Wheel Spacers for 1995-2023 Tacoma

#3

3. FLYCLE 1-Inch Spacers

• Weight: 11.77 lb

Best for: 106mm bore, one-inch fitment.

Why it ranks #3: Lists 1995–2023 Tacoma compatibility, a 106mm center bore, 12×1.5 studs, and one-inch thickness for a restrained spacing change.

FLYCLE’s 106mm center bore and one-inch thickness make this set a defined option for Tacoma owners seeking a modest wheel-spacing change. Its compatibility list includes 1995–2023 Tacoma, explicitly excludes five-lug Tacoma models, and also names 4Runner, Tundra, FJ Cruiser, Sequoia, and other applications.

The 6×139.7mm pattern, 106mm center bore, and 12×1.5 studs give buyers specific dimensions to compare with their vehicle before fitting the spacers. One-inch thickness offers a smaller outward shift than the 1.5- and two-inch options here. The listing identifies forged construction and describes installation as easy, while its model-by-model fitment list adds useful boundaries, including the explicit exclusion of five-lug Tacoma models.

Skip it if you have a five-lug Tacoma; this FLYCLE listing specifically says it does not fit that configuration.

FLYCLE suits six-lug Tacoma owners seeking one-inch spacers with a 106mm bore and a broad named fitment list. Its five-lug exclusion is decisive, so assess the vehicle’s lug configuration and listed application before buying.

Listed on Amazon as: FLYCLE 6×5.5 Hubcentric Wheel Spacers 1 Inch for 1995-2023 Tacoma 4Runner, 6×139.7mm with 12×1.5 Studs 106mm Center Bore Forged Wheel Spacer for Tundra FJ Cruise Fortuner Sequoia GX460 GX470

#4 · Best Anodized Option

4. Nilight 1-Inch Spacers

• Weight: 6.6 lb

Best for: Lightweight anodized one-inch set.

Why it ranks #4: Lists 1995–2023 Tacoma fitment and four one-inch spacers, with 6061 aluminum, CNC processing, and an anodized-black finish.

Nilight specifies CNC-processed 6061 aluminum alloy with an anodized black surface on its one-inch spacer set, combining a lightweight material with a finish intended to resist rust. The four-piece package lists a 6×139.7mm pattern and 108mm hub bore, with Tacoma and 4Runner among its compatible vehicles.

A one-inch thickness gives buyers seeking a modest wheel-spacing change a smaller step than the 1.5- or two-inch alternatives. The 108mm hub bore and M12x1.5 thread size provide concrete dimensions to compare with the vehicle and wheel hardware. Nilight also lists 6061 aluminum alloy, CNC processing, and anodized treatment, connecting the material and finish to the stated goals of lower weight, durability, and rust resistance.

Skip it if you need a 106mm bore; Richeer’s one-inch spacers specify a 106mm center bore.

Nilight is a practical match for buyers seeking a one-inch set with an anodized aluminum finish and clearly listed 108mm bore. Compare that bore and the M12x1.5 thread specification with the intended Tacoma setup.

Listed on Amazon as: Nilight 6×5.5 Wheel Spacers for Toyota Tacoma 4Runner 1995-2023

#5

5. maXpeedingrods 1-Inch Spacers

• Weight: 11.9 lb

Best for: Torque-specified one-inch spacers.

Why it ranks #5: Provides a 6×139.7mm pattern, 106mm hub bore, M12x1.5 thread pitch, and four spacers; its listing recommends verifying vehicle fitment.

maXpeedingrods specifies a 72–80 ft-lb hand-wrench torque range for its one-inch spacers, giving installers a concrete tightening reference. The 6×139.7mm bolt pattern, 106mm hub bore, and M12x1.5 thread pitch provide fit dimensions, while the package specification lists four six-lug spacers.

The one-inch thickness offers a modest spacing change compared with the 1.5- and two-inch alternatives in this roundup. Its 106mm hub bore and 6×139.7mm pattern help buyers compare the spacer with the intended Tacoma wheel setup, while the M12x1.5 thread pitch and grade 10.9 studs specify hardware details. maXpeedingrods recommends 72–80 ft-lb using a hand wrench, a useful installation reference grounded in the listed specifications.

Skip it if you need model-year-specific Tacoma fitment listed; Richeer names Tacoma coverage from 1995–2023 for six-lug vehicles.

maXpeedingrods suits buyers seeking one-inch spacers with a stated bore, thread pitch, stud grade, and torque range. The supplied application information does not name Tacoma model years, so vehicle fit needs careful assessment.

Listed on Amazon as: maXpeedingrods 1′′ 6×5.5 Wheel Spacers with 106mm Hub Bore | M12x1.5

#6 · Best 1.5-Inch Pick

6. Rough Country 1.5-Inch Spacers

• Weight: 8.53 lb

Best for: Wider tires, preinstalled studs.

Why it ranks #6: Offers a 1.5-inch spacer for listed 2005–2022 Tacoma fitment, with a 6×139.7mm pattern, 6061-T6 aluminum, and preinstalled studs.

Rough Country specifies preinstalled studs on its 1.5-inch spacers, a practical hardware detail for buyers planning a wider-tire setup. The hub-centric design and 6×139.7mm pattern are paired with stated Tacoma and 4Runner applications, while the listing notes that hub-centric construction is not available for every model.

The 1.5-inch thickness is intended to space wheels outward and allow wider tires, linking the spacer dimension to a stated use case. Rough Country specifies 6061-T6 aluminum for corrosion resistance and preinstalled studs, so buyers can evaluate both material and supplied hardware before installation. Its listing covers 2005–2022 Tacoma and 2010–2022 4Runner, sold as pairs. Because hub-centric design is not available for all models, that qualification matters when checking application.

Skip it if you need four spacers in one set; Nilight’s listing specifies four pieces.

Rough Country fits owners of listed Tacoma and 4Runner models seeking 1.5-inch spacing for wider tires, especially when preinstalled studs matter. Check whether hub-centric design applies to the specific vehicle; the product is sold as pairs.

Listed on Amazon as: Rough Country 1.5" Wheel Spacers for 05-22 Tacoma/10-22 4-Runner | 6×5.5-10089,Silver

#7

7. BDFHYK 1.5-Inch Spacers

• Weight: 7.72 lb

Best for: 1.5-inch Toyota and Lexus coverage.

Why it ranks #7: Lists 2002–2022 Tacoma compatibility, a 38.1mm thickness, 106mm center bore, and M12x1.5 thread pitch.

BDFHYK’s 1.5-inch thickness offers a midrange spacing choice for owners who want more than a one-inch spacer without moving to a two-inch set. Its stated 6×139.7mm pattern and 106mm center bore accompany compatibility listings for Tacoma, 4Runner, Tundra, FJ Cruiser, Sequoia, and Lexus GX models.

The 38.1mm thickness and M12x1.5 thread pitch give buyers precise dimensions to consider when selecting a spacer for a named six-lug application. BDFHYK lists Tacoma years 2002–2022 and also covers several Toyota and Lexus models, helping owners assess the set against its stated range. The package details include four spacers, a pair of gloves, and a steel-wire ball; the listing also notes lifetime after-sales service.

Skip it if you have a 1995–2001 Tacoma; FLYCLE’s fitment list includes Tacoma models from 1995 onward.

BDFHYK suits buyers seeking 1.5-inch spacers for a Tacoma in its stated 2002–2022 range or another listed Toyota or Lexus model. Its earlier Tacoma-year boundary is important when assessing vehicle fit.

Listed on Amazon as: BDFHYK 6×139.7mm Wheel Spacers 1.5 Inch 6×5.5 for Lexus Toyota 1996-2022

#8

8. ILONPA 1.5-Inch Spacers

• Weight: 15.51 lb

Best for: Forged 1.5-inch construction.

Why it ranks #8: Specifies a 106mm hub bore, 6×139.7mm pattern, 12×1.5 studs, and forged 6061-T6 aluminum, though Tacoma model-year coverage is not stated.

ILONPA pairs 1.5-inch thickness with forged 6061-T6 aluminum, making this a middle-thickness choice with a specified high-strength aluminum construction. Its 106mm hub bore, 6×139.7mm pattern, and 12×1.5 studs provide fit dimensions, while the listing names Tacoma, 4Runner, and several related vehicles.

The 1.5-inch spacing falls between the one-inch and two-inch choices, giving buyers a clearly defined thickness to evaluate for their wheel position. ILONPA says each spacer is CNC-machined and anodized, connecting precision machining and surface treatment to the stated goals of accurate installation and corrosion resistance. Geomet-treated 10.9-grade studs and heat-treated lug nuts add specified hardware details. The 106mm bore and 6×139.7mm pattern remain key fit checks.

Skip it if you want a published torque recommendation; Richeer’s one-inch set specifies 70–80 ft-lb.

ILONPA fits buyers seeking forged 1.5-inch spacers with treated studs and heat-treated lug nuts. Check its 106mm bore, 6×139.7mm pattern, and vehicle application; the supplied details do not provide a torque recommendation.

Listed on Amazon as: ILONPA 6×5.5 1.5 inch Forged Wheel Spacers with 106mm Hub Bore Fits Toyota Tacoma 4Runner Tundra Fortuner Ventury, GX460 470 400 J120 J150, 4pcs 6×139.7mm Wheel Adapters with 12×1.5 Studs 6 Lugs

#9

9. dynofit 2-Inch Spacers

• Weight: 19.14 lb

Best for: Two-inch offset, broad fitment.

Why it ranks #9: Lists broad Tacoma compatibility and a 2-inch thickness, but its details give conflicting hub-bore figures of 108mm and 95.2mm.

A two-inch thickness is the dynofit set’s clearest differentiator, giving buyers seeking a more pronounced wheel offset a thicker option than the one-inch spacers in this roundup. Its 6×5.5-inch pattern and stated Tacoma coverage span 1995–2023 six-lug models, alongside a long list of other named applications.

The listing pairs a 6×139.7mm bolt pattern with a 95.2mm hub bore, identified as hub-centric, so buyers can evaluate those dimensions against their vehicle and wheels. Forged construction is named as a special feature, while the two-inch thickness supports the intended wider wheel position. The broad fitment list includes Tacoma, 4Runner, and FJ Cruiser, among others. The seller also notes local width rules and advises keeping wheels and tires within legal limits.

Skip it if you need a 106mm center bore; FLYCLE’s 1-inch 106mm-bore spacers list Tacoma compatibility.

Choose dynofit if a two-inch spacer and its extensive named vehicle coverage match your plan. Its 95.2mm hub bore is a key fit dimension to assess, and the listing cautions against wheels or tires exceeding legal width limits.

Listed on Amazon as: dynofit 6×5.5 Wheel Spacers 2 Inch Compatible with Toyota Tacoma, 4Runner, FJ Cruiser | M12x1.5 Extended Lug Nuts, 108mm Hub Bore, 6×139.7 Forged Spacers for Tundra GX460 GX470 Sequoia Fortuner

#10

10. EZISOE 2-Inch Spacers

Best for: Two-inch spacers with extended nuts.

Why it ranks #10: Lists six-lug Tacoma fitment and a 2-inch thickness, but its stated 108mm bore and fitment descriptions should be carefully verified.

EZISOE combines a two-inch spacer thickness with 12×1.5 extended shank lug nuts, a pairing aimed at buyers seeking a substantial outward wheel position and specified fastening hardware. Its listing names six-lug Tacoma and 4Runner fitment, along with other applications, and specifies a 108mm hub bore.

The two-inch thickness is among the larger options in this roundup, while the 6×139.7mm bolt pattern identifies the wheel arrangement it serves. EZISOE specifies aluminum construction, a 108mm hub bore, and extended 12×1.5 shank lug nuts, giving buyers several dimensions and hardware details to check before installation. The stated Tacoma compatibility is for six-lug vehicles; the listing also covers 4Runner, FJ Cruiser, Tundra, Sequoia, and additional models.

Skip it if you have a five-lug Tacoma; EZISOE states compatibility only for six-lug Tacoma vehicles.

This EZISOE set is suited to six-lug Tacoma owners seeking two-inch spacers and extended shank lug nuts. Its 108mm hub bore and vehicle-specific lug configuration are essential fit considerations before installation.

Listed on Amazon as: 2" 6×5.5”(6×139.7mm) Wheel Spacers 108mm M12x1.5 for Tacoma, 4Runner