Best Motorcycle Grips For Numb Hands: 10 Options Compared

#1 · Best Overall

1. Grip Puppy Comfort Grips

• Dimensions: 6"L x 1.45"W
• Material: Technical Foam Product, Stable, Closed Cell
• Compatible with Vehicle Type: ATV, Scooter
• Size: Original

Best for: Foam overgrips for vibration relief.

Why it ranks #1: Stable, closed-cell technical foam is designed to reduce vibration and fatigue, and the over-grip format fits over standard round grips.

Stable, closed-cell technical foam is the defining material of Grip Puppy GP-O, giving numb-hand-conscious riders a vibration-reducing layer over standard round grips. Its overgrip format preserves the existing grip beneath, while the hand-finished texture and rounded ends focus attention on comfort at the contact points.

Grip Puppy’s foam is specified to reduce vibration and hand fatigue, while its textured, hand-finished surface supports grip and control. These are overgrips that fit over standard round motorcycle grips, scooters and ATVs, so installation adds a layer rather than replacing the original grips. The six-inch length and 1.45-inch width help gauge the resulting coverage. The listed installation method uses dilute soapy water to lubricate the inside before working the covers onto the bars.

Skip it if you want a direct rubber replacement with a defined left-right fit; Coxotom VHG-BK lists 22 mm and 24 mm grips.

Choose Grip Puppy GP-O if you want foam comfort without removing standard round grips, including on a motorcycle, scooter or ATV. Its six-inch length and overgrip format are important considerations for available bar space.

Listed on Amazon as: The Original Grip Puppy Comfort Grips

#2 · Best Pillow Top

2. Pro Taper Pillow Top Grips

• Dimensions: 6.4"L x 2.6"W
• Material: Plastic, Rubber
• Compatible with Vehicle Type: Motorcycle
• Size: 6.4 in x 2.6"

Best for: Pillow-top grip for off-road use.

Why it ranks #2: Its Vibrasonix pillow top is described as cushioning impact and eliminating vibration, with a tacky surface compound aimed at off-road riders.

Pro Taper’s Vibrasonix pillow top is the key comfort feature, specified to eliminate vibration and cushion impact for riders on rougher routes. A tacky, gel-like surface targets off-road grip, while the denser anti-rip tip and self-cleaning outer surface address wear and mud during use.

The pillow-top construction is described as cushioning impact and reducing vibration, directly addressing comfort over uneven terrain. Its tacky gel-like compound supports grip for off-road riding, and the denser anti-rip tip is intended to extend grip life. The outer surface is designed to shed mud and self-clean, helping keep the contact area clearer in dirty conditions. The listing identifies these as motorcycle grips, but supplies limited fitment detail, so the listed dimensions should be considered when checking bar space.

Skip it if you need a stated 7/8-inch twist-throttle fit; G2 Ergonomics Domino Moto GP A01041C specifies that handlebar compatibility.

Pro Taper’s Pillow Top grips suit off-road riders seeking vibration cushioning, a tacky surface and mud-shedding features. Because the listing gives limited fitment information, check the stated grip dimensions against your handlebar space.

Listed on Amazon as: PRO TAPER Pillow Top Motorcycle Grips – BLACK – CRF YFZ RMZ KXF SXF XC -024858

#3 · Impact Cushioning

3. Pro Taper Pillow Grip

• Dimensions: 9.5"L x 1.3"W
• Material: Silicone, Synthetic Rubber
• Compatible with Vehicle Type: Bicycle, Motorcycle
• Size: 9.5 in x 1.3"

Best for: Cushioned contact for off-road rides.

Why it ranks #3: The listed Vibrasonix pillow top cushions impact, and the product uses silicone and synthetic rubber; the listing covers motorcycle use.

Vibrasonix pillow-top cushioning is the defining feature of this Pro Taper grip, with the description stating that it reduces vibration and cushions impact. A tacky gel-like surface targets off-road hand contact, while silicone and synthetic rubber make up the listed materials for motorcycle and bicycle use.

The pillow-top surface is specified to cushion impact and eliminate vibration, making it the central comfort feature for rougher rides. Its tacky gel-like compound is described as suited to off-road riders, while the inner core is intended to improve its bonding interface with the bars. A denser anti-rip tip is meant to increase grip life, and the outer surface is designed to shed mud. The listing gives a 9.5-inch length, so check available bar space before selecting it.

Skip it if you need a specified 7/8-inch motorcycle fit; G2 Ergonomics Domino Moto GP A01041C lists 7/8-inch twist-throttle compatibility.

Choose this Pro Taper grip if you want pillow-top cushioning and a tacky surface for off-road use on a motorcycle or bicycle. Its listed 9.5-inch length makes handlebar space a key fit consideration.

Listed on Amazon as: ProTaper Pillow Grip – Black/Grey/Red 024851

#4 · Best Foam Covers

4. CHENGRUN Foam Grip Covers

• Dimensions: 4.52"L x 1.3"W
• Material: foam
• Compatible with Vehicle Type: Universal Motorcycle Grip Covers
• Size: 1 inch x 4.52"

Best for: Foam comfort for long rides.

Why it ranks #4: High-density foam covers are specified for 25 mm handlebars and are described as absorbing vibration; the pair measures 115 mm long.

High-density foam is the defining feature of these CHENGRUN TRADE covers, giving riders a softer handlebar contact point while absorbing vibration. Their textured, anti-slip surface also supports a steadier hold with wet hands or gloves, and the 25 mm inside diameter targets standard 25 mm and 7/8-inch handlebars.

The foam construction is specified to absorb handlebar vibration and reduce hand fatigue on long rides, making these covers a comfort-focused option for standard bars. A frosted, textured anti-slip finish supports a secure grip with wet hands or gloves. The stated 25 mm inside diameter and 115 mm length help assess fit before installation; the included pair covers left and right sides. Installation calls for a water-and-washing-up-liquid mixture, so have that ready to help fit the covers.

Skip it if you need a specified fit for a nonstandard bar; Coxotom VHG-BK lists separate 22 mm and 24 mm grip diameters.

Choose these foam covers if vibration and hand fatigue are concerns on longer rides and your bars match the 25 mm sizing. Their 115 mm length and wet-installation method are practical fit considerations.

Listed on Amazon as: 2 Pcs Motorcycle Foam Hand Grips Covers, 25 mm/0.98 Inch Universal Anti Slip Motorcycle Grip Covers Shock Absorption Handlebar Grip for BMW Yamaha Honda Suzuki Kawasaki

#5

5. Surpassme Comfort Grips

• Dimensions: 4.92"L x 1.26"W
• Material: Rubber
• Compatible with Vehicle Type: Motorcycle
• Size: Bar End-7/8"&1"(22mm&24mm)

Best for: Soft rubber for mixed bar sizes.

Why it ranks #5: Soft, shock-resistant rubber is described as helping relieve fatigue, and the stated fit is 7/8-inch left and 1-inch right.

Soft, shock-resistant rubber is the main comfort feature of these Surpassme grips, with the listing connecting it to reduced fatigue on long rides. Their 22 mm left and 24 mm right sizing gives buyers a specific handlebar layout to check, while the non-slip surface supports a steadier hold.

The rubber construction is described as soft and shock-resistant, offering a comfort-oriented contact surface for longer rides. A non-slip finish supports grip, while the stated 7/8-inch left and 1-inch right fit helps identify the intended bar arrangement. The grips are listed for motorcycles and measure 4.92 inches long. Installation is described as easy, but instructions are not included, so buyers should be prepared to fit them without a supplied instruction sheet.

Skip it if you want supplied installation instructions; Benlari 1inch Cable Throttle Handlebar Grips lists defined cable-throttle fitment details.

Choose Surpassme if you want soft, shock-resistant rubber and your motorcycle uses the stated 22 mm-left, 24 mm-right layout. The lack of included instructions is worth considering if you prefer guided installation.

Listed on Amazon as: Motorcycle Grips Non Slip Rubber Bar End Thruster Grip 7/8" 22mm 24mm Motorcycle Comfort Hand Handlebar Grip Thruster Grip

#6

6. Coxotom Rubber Grips

• Dimensions: 4.92"L x 1.25"W
• Material: Rubber
• Compatible with Vehicle Type: ATV, Bike, Dirt Bike, Harley, Motorcycle…
• Size: 7/8"22mm left grip & 1" 24mm right grip

Best for: Vintage diamond universal fit.

Why it ranks #6: Soft, non-slip rubber is described as comfortable for long rides, with a vintage diamond design and 7/8-inch left, 1-inch right sizing.

A vintage diamond pattern gives Coxotom’s rubber grips their clearest point of difference, adding a textured contact surface for motorcycle and dirt-bike riders. The pair uses distinct 22 mm left and 24 mm right diameters, so its stated sizing supports a more informed fit check than a single-size description.

Soft, non-slip rubber is specified to provide a comfortable hold and help relieve fatigue during long drives. The diamond design adds texture, while the separate 7/8-inch left and 1-inch right sizing reflects the stated grip layout. The listing covers a broad range including Harley, Honda, Yamaha, Suzuki, Kawasaki and dirt bikes. If installation feels tight, the supplied guidance recommends detergent or lubricant to help slide the grips onto the handlebars.

Skip it if you need cushioning without replacing your existing grips; Grip Puppy GP-O fits over standard round grips.

Pick Coxotom’s pair if you want soft rubber, a vintage diamond pattern and the stated 22 mm-left, 24 mm-right layout. Check those different diameters against your bars, especially when selecting grips for a specific motorcycle.

Listed on Amazon as: Universal Motorcycle Handles Grips – Non Slip Rubber Motorcycle Grips for Harley Honda Yamaha Suzuki Kawasaki Dirt Bike

#7 · Best Lock-On

7. ODI X-Treme Lock-On Grips

• Material: Rubber
• Compatible with Vehicle Type: ATV
• Size: 130mm

Best for: Lock-on traction for ATV riders.

Why it ranks #7: The patented lock-on system is specified as slip-free, and tacky diamond-plate pads provide traction; the 130 mm design is listed for ATV use.

ODI’s patented Lock-On system is the defining feature of the X-Treme grips, with the listing specifying slip-free performance for riders seeking dependable bar contact. Tacky diamond-plate pads add a grippy surface, while the small 3/4-inch flange is intended to help keep hands on the bars.

The tacky diamond-plate pads are specified to provide traction, supporting a secure hold across conditions. ODI’s Lock-On system is described as slip-free, addressing grip movement at the bar rather than adding a separate cushioning claim. At 130 mm long, these rubber grips give ATV riders a defined length to compare with their handlebar space. Their ATV compatibility and small 3/4-inch flange further shape the fit and hand-position considerations for off-road use.

Skip it if you need grips explicitly listed for a street bike; G2 Ergonomics Domino Moto GP A01041C fits 7/8-inch twist-throttle bars.

Choose these ODI X-Treme grips if you ride an ATV and prioritize tacky traction with a Lock-On system. Their stated 130 mm length and ATV-specific compatibility are the key boundaries when considering fit.

Listed on Amazon as: ODI ATV X-Treme Lock-On Off-Road Motorcycle Hand Grips – Black/Black/One Size

#8

8. G2 Domino Moto GP Grips

• Dimensions: 4.96"L x 0.87"W
• Material: Thermoplastic Rubbers
• Compatible with Vehicle Type: Sport Bike
• Size: For 22mm (7/8") handlebars with twist grip

Best for: Precise feel for sport-bike bars.

Why it ranks #8: Dual thermoplastic compounds are described as combining comfort with precise control, but the grips were designed for road-race competition.

A dual-compound thermoplastic construction distinguishes the Domino Moto GP grips, combining a medium inner grip with a different outer compound for a comfortable yet precise feel. At 126 mm long, the pair is listed for 7/8-inch handlebars with a twist throttle, targeting sport-bike riders who value controlled hand contact.

The two thermoplastic compounds separate the inner grip from the outer contact surface, with the supplied description linking that construction to comfort and precision. Their 126 mm length suits the stated 7/8-inch twist-throttle fit, while the inner lip can be removed with a sharp blade to reduce length to 120 mm. That trim option helps accommodate shorter grip space, but requires careful cutting. The product is described as developed for road-race competition and is sold as a pair.

Skip it if you want foam specifically described for vibration absorption; Grip Puppy GP-O uses technical foam to reduce vibration.

Consider the Domino Moto GP pair if your sport bike has 7/8-inch twist-throttle bars and you value the stated dual-compound feel. Its 126 mm length, optional lip trimming and road-race focus define the fit.

Listed on Amazon as: G2 by Domino Moto GP Motorcycle Grips for 7/8" (22mm) Handlebar (Pair)

#9

9. ODI Vans Cult Street Grips

• Dimensions: 4.92"L x 1"W
• Material: Rubber
• Compatible with Vehicle Type: Street Bike
• Size: 125mm x 25.4mm

Best for: One-inch street-bike replacement.

Why it ranks #9: These 1-inch rubber grips are listed for street bikes, but the supplied product details do not identify a vibration-damping or cushioned feature.

A 1-inch size and rubber construction define the ODI Vans Cult Street grips, making them a straightforward candidate for riders seeking replacement grips for a compatible street bike. Their 125 mm length gives a concrete sizing reference, while the product listing identifies the intended vehicle category as a street bike.

These grips use rubber and measure 125 mm long by 25.4 mm wide, so the dimensions offer a useful check against a bike’s existing grip space. The listing identifies them for street bikes and describes them as 1-inch black motorcycle hand grips, but supplies no cushioning or vibration-reduction feature to guide a numb-hands decision. That makes them a fit-led option: verify that the bar and throttle arrangement match the stated 1-inch size before choosing them.

Skip it if you want stated vibration cushioning; Grip Puppy GP-O uses soft foam to reduce vibration and hand fatigue.

Consider these ODI Vans Cult grips if you need 1-inch rubber replacements for a street bike and can match the listed dimensions. Riders prioritizing documented vibration cushioning should look to a foam or pillow-top option instead.

Listed on Amazon as: ODI Vans Cult Street Motorcycle Hand Grips – Black / 1"

#10

10. Benlari Cable Throttle Grips

• Dimensions: 5.5"L x 1.7"W
• Material: Aluminum
• Compatible with Vehicle Type: Fit for Harley Davidson Touring Dyna Softail…
• Size: 1inch Cable Throttle Handlebar Grips

Best for: Cable-throttle Harley fitment.

Why it ranks #10: These grips target specified Harley models with a 1-inch cable throttle and exclude electric throttles; the listing gives no vibration-damping feature.

A cable-throttle configuration and 1-inch sizing make Benlari’s grips a targeted option for compatible Harley-Davidson owners. The listing names Touring, Sportster, Softail and Dyna applications alongside specific year ranges and exclusions, helping buyers narrow fitment before considering the rubber hand-contact surface.

These grips are listed for 1-inch handlebars and cable throttles, with fitment covering specified Harley-Davidson Touring, Sportster, Softail and Dyna models. The long list of model-year ranges and exceptions means checking the exact motorcycle is central to the purchase. Rubber provides the stated hand-contact material, while the 5.5-inch length and 1.7-inch width help assess dimensions. The product description explicitly excludes 1-1/4-inch throttle-side bars and electric-throttle handlebars, making those boundaries decisive.

Skip it if you have an electric throttle; G2 Ergonomics Domino Moto GP A01041C is listed for 7/8-inch twist-throttle handlebars.

These are for riders with a listed Harley model, 1-inch bars and a cable throttle who want a direct grip pair. The model-year exceptions and exclusion of electric throttle make precise fitment essential.

Listed on Amazon as: Benlari 1inch Handlebar Grips, Cable Throttle Hand Grips, Non-Slip Rubber Motorcycle Handgrips Fit for Harley Davidson Touring Dyna Softail Sportster 883 1200