Best Shocks For Jeep Grand Cherokee: Compare 10 Options

#1 · Best Overall

1. Bilstein 5100 Monotube Set

• Weight: 26.1 lb

Best for: Adjustable front ride height.

Why it ranks #1: Covers front and rear on listed 2005–2010 Grand Cherokees, with 46-millimeter monotube construction, digressive valving, and zinc plating.

Front ride-height adjustment from zero to three inches makes this Bilstein 5100 set relevant to 2005–2010 Grand Cherokee owners configuring a coilover-style suspension. Its 46 mm monotube construction and digressive valving add damping features, while zinc plating addresses exposure to harsh environmental elements.

Bilstein describes the monotube design as delivering consistent, non-fading performance, and its digressive valving responds to changing road surfaces for comfort and control on and off road. The front shocks allow ride-height adjustment from zero to three inches, offering a defined adjustment range for coilover-style suspensions. Zinc plating is specified for resistance to environmental elements. These details suit buyers balancing ride-height setup with road response, but the listing identifies a particular 2005–2010 vehicle application.

Skip it if you need a lift-specific set for a 1999–2004 Grand Cherokee; Bilstein’s B8 5100 set is listed for a 1.5–2-inch lift on those years.

This set fits buyers adjusting front ride height on a 2005–2010 Grand Cherokee with coilover-style suspension. Its zero-to-three-inch range and listed vehicle application should guide the setup decision.

Listed on Amazon as: Bilstein 5100 Monotube Gas Adj Shock & Strut Set for 05-10 Jeep Grand Cherokee

#2 · Best Older-Model Set

2. ECCPP Front Rear Shocks

• Weight: 17.2 lb
• Material Type: Steel
• Compatible with Vehicle Type: Car

Best for: Four-shock replacement set.

Why it ranks #2: Includes four front and rear shocks for Grand Cherokees from the specified older range, and the listing states it meets or exceeds OE specifications.

A four-piece front-and-rear shock set gives 1999–2004 Grand Cherokee owners both axle pairs in one package, enabling a coordinated replacement rather than piecing together front and rear units. ECCPP lists steel construction with chrome or zinc coating, and states that the shocks meet or exceed OE specifications for form, fit, and function.

The set includes four front and rear shocks, so buyers replacing both axles can source the listed components together. Its stated 1999–2004 Grand Cherokee fitment narrows the application, while the steel construction and chrome or zinc coating speak to the shock bodies’ material and finish. ECCPP says the units meet or exceed OE specifications in form, fit, and function. The package excludes strut mounts, coil springs, and rubber buffers, so it is not a complete strut assembly.

Skip it if you need a complete strut assembly with mounts and springs; KUIPERAUTO’s 2005–2010 complete assemblies suit that different model range.

Choose this set when replacing front and rear shocks on a 1999–2004 Grand Cherokee and sourcing both axle pairs together. It is a shock-only package, so retain or obtain mounts, springs, and buffers separately.

Listed on Amazon as: Grand Cherokee Shocks,ECCPP 4x Front Rear Shocks Absorbers for Jeep Fits 1999 2000 2001 2002 2003 2004 for Jeep Grand Cherokee 344342 344341 Auto Shocks Gas Struts Sets (Set of 4 Front and Rear)

#3 · Best Lifted Set

3. Bilstein B8 5100 Set

• Weight: 19.2 lb
• Compatible with Vehicle Type: SUV

Best for: Lifted 1999–2004 Grand Cherokee.

Why it ranks #3: Provides front and rear shocks for 1999–2004 Grand Cherokees with a 1.5–2-inch lift, using a 46-millimeter monotube design.

A specified 1.5–2-inch lift range makes Bilstein’s B8 5100 set a targeted choice for 1999–2004 Grand Cherokee owners running that lift height. The front-and-rear package combines 46 mm monotube construction with digressive valving, connecting lift compatibility to damping response across changing surfaces.

Bilstein’s 46 mm monotube design is described as providing consistent, fade-free performance, while its digressive valving reacts to changing surface conditions. Together, those features address sustained damping and surface transitions for road or trail use. The set is identified as a direct-fit solution for lifted SUVs, and hardware is included, which supports a more straightforward installation workflow. Its stated application is specifically Grand Cherokees with a 1.5–2-inch lift, rather than stock-height or differently lifted setups.

Skip it if you have a 2005–2010 Grand Cherokee and need front ride-height adjustment; Bilstein’s 24-225793/33-225807 set covers that later range.

Choose this Bilstein set for a 1999–2004 Grand Cherokee with the specified 1.5–2-inch lift, especially when monotube consistency and surface-responsive valving matter. The listed lift range is the key fit boundary.

Listed on Amazon as: Bilstein 24-185622 33-236957 5100 Series Set of Front & Rear Shocks fit 1999 2004 Jeep Grand Cherokee with 1.5-2" lift

#4 · Best Progressive Valving

4. Rancho RS5000X Gas Shocks

• Weight: 25 lb
• Material Type: Iron Alloy
• Compatible with Vehicle Type: Car

Best for: 1999–2004 on-road and trail.

Why it ranks #4: Fits 1999–2004 Grand Cherokee 2WD and 4WD models; progressive engagement valving is designed to reduce initial impacts at low speeds.

Rancho’s vehicle-tuned progressive engagement valving is intended to reduce initial impacts at low speeds, giving 1999–2004 Grand Cherokee owners a comfort-focused reason to consider this RS5000X set. Cross Tuned technology combines rebound valving with an advanced compression phase for handling on and off road.

The progressive engagement valving is custom-tuned for each vehicle and is described as minimizing a rough ride by reducing initial low-speed impacts. Rancho’s Cross Tuned system adds an exclusive rebound-valving system and advanced compression phase, linking ride response with handling goals on road and off. A 16 mm nitro-carburized piston rod is specified to resist scuffs and corrosion. The listing identifies a set compatible with 2WD and 4WD WJ Grand Cherokees from 1999–2004.

Skip it if you drive a 2011–2022 Grand Cherokee and need rear shocks; Rough Country’s 23299_A N3 pair is listed for that newer range.

Rancho’s set suits 1999–2004 WJ owners seeking vehicle-tuned impact control for mixed road and off-road use. Its stated compatibility covers both 2WD and 4WD, but not later Grand Cherokee ranges.

Listed on Amazon as: Rancho RS5000X Gas Shocks Set compatible with 1999-2004 Jeep Grand Cherokee 2WD 4WD WJ

#5 · Best Complete Assembly

5. KUIPERAUTO Complete Assemblies

• Material Type: Metal, Oil
• Compatible with Vehicle Type: Car

Best for: Complete assemblies for 2005–2010.

Why it ranks #5: Lists front and rear assemblies for 2005–2010 Grand Cherokees except SRT8, making it a broad option for owners needing assembly-style replacements.

Complete front-and-rear strut assemblies make this KUIPERAUTO four-piece package the option for buyers seeking more than standalone shocks. Listed for 2005–2010 Jeep Grand Cherokee models except SRT8, it also fits 2006–2010 Jeep Commander, giving owners of those vehicles a specified replacement range.

KUIPERAUTO describes these as complete front and rear assemblies, which distinguishes the package from shock-only replacements and supports a more consolidated parts purchase. The stated Grand Cherokee range excludes SRT8, while the additional Commander fitment covers 2006–2010 models. The product description says the absorbers reduce body bounce, smooth road bumps, and improve stability and comfort; those stated effects make the set relevant to buyers seeking changes in both ride and vehicle control.

Skip it if you own a 1999–2004 Grand Cherokee; ECCPP’s four-shock set covers that earlier range.

This package suits owners of eligible 2005–2010 Grand Cherokees who want complete front and rear assemblies, or Commander owners in the listed years. SRT8 Grand Cherokees are outside the stated fitment.

Listed on Amazon as: KUIPERAUTO Front and Rear Struts Complete Assembly Shocks Absorbers Compatible for 2005-2010 Jeep Grand Cherokee / 2006-2010 Jeep Commander,171377L,171377R,911278 4PCS

#6

6. Monroe Load Adjusting Shocks

• Weight: 1000 g
• Material Type: Polytetrafluoroethylene
• Compatible with Vehicle Type: Car, Truck

Best for: Load-adjusting towing support.

Why it ranks #6: Its calibrated spring is intended to adjust to road and weight conditions, and the listed fitment includes Grand Cherokee models in the specified range.

A heavy-gauge calibrated spring adjusts to road and weight conditions, giving Monroe’s load-adjusting shocks a specific role for Grand Cherokee owners who tow or carry varying loads. The two-piece shock-and-coil-spring assembly is listed across several 2005–2010 Grand Cherokee applications and selected Commander models.

The calibrated spring is intended to adjust as operating weight and road conditions change, while Monroe says the load-adjusting design helps reduce sag under load. That combination makes the assembly relevant to vehicles that alternate between lighter use and towing or carrying cargo. The pack contains two assemblies, not a complete four-corner set. Monroe lists several model-year applications, so the vehicle’s engine and trim details matter when narrowing the stated fitment.

Skip it if you want shocks without load-adjusting springs; Bilstein’s 24-225793/33-225807 set uses monotube shocks and includes front ride-height adjustment.

This Monroe pair suits a Grand Cherokee used to tow or carry changing loads, particularly when reducing sag is a concern. Check the listed year, engine, and trim application; it is not a four-corner kit.

Listed on Amazon as: Monroe Load Adjusting 58646 Suspension Shock Absorber and Coil Spring Assembly Pack of 2 for Jeep Grand Cherokee

#7

7. PM Auto Rear Shocks

• Weight: 18.2 lb
• Material Type: Metal
• Compatible with Vehicle Type: Car

Best for: Rear shocks for specified suspensions.

Why it ranks #7: Offers a pair of rear shocks for specified 2011–2021 Grand Cherokee Sport or Eco suspension applications, while excluding air, electronic, and load-leveling suspension.

A premium OE-grade seal is specified for dependable performance under a range of temperatures, making this PM Auto pair a rear-shock option for listed 2011–2021 Grand Cherokee suspension configurations. The package contains two complete rear shock absorbers, not front units or a four-corner set.

The pair targets particular Grand Cherokee applications: 2011–2015 models with Sport suspension and 2016–2021 models with Eco suspension, subject to listed exclusions. PM Auto specifies a premium OE-grade seal for dependable performance under temperature extremes. That seal detail speaks to operating conditions, while the suspension-specific fitment helps narrow the application. Air, electronic, and load-leveling suspension are excluded in the listed fitment, so this pair is not a universal rear-shock match for those model years.

Skip it if you need front shocks or have air suspension; Rough Country’s 23299_A pair is a rear-shock option for a different Grand Cherokee year range.

Consider this PM Auto pair for the listed Sport- or Eco-suspension Grand Cherokee applications when replacing rear shocks. Its exclusions for air, electronic, and load-leveling suspension make suspension type central to selection.

Listed on Amazon as: PM Auto Pair of 2 Rear Complete Shock Absorber kit Compatible With 2011-2021 Jeep Grand Cherokee w/Sport or Eco Suspension

#8

8. Rough Country N3 Rear Shocks

• Weight: 12.8 lb
• Material Type: Alloy Steel, Aluminum, Rubber
• Compatible with Vehicle Type: 2011-2023 2WD Jeep Grand

Best for: Variable-valving rear pair.

Why it ranks #8: The two rear N3 shocks offer 10-stage variable valving and nitrogen charging for listed 2011–2022 Grand Cherokee applications, with a 0–2.5-inch range.

Ten-stage variable valving is the defining feature of these Rough Country N3 rear shocks, letting the damping response vary across operating conditions. The pair is listed for 2011–2022 Grand Cherokee models in the title, making it a rear-axle-focused choice rather than a complete four-corner replacement.

The 10-stage variable valving is paired with a nitrogen charge, features Rough Country describes as blending off-road action with highway ride quality. A 54 mm shock body and fast-cooling design are listed alongside a spring-loaded piston rod seal, giving buyers several construction details relevant to repeated suspension movement. Rubber bushings are included. The package contains two rear shocks, so buyers planning a full-vehicle replacement will need to address the front separately.

Skip it if you need front shocks too; Rough Country’s 23169_A N3 pair is the listed front-shock option for older ZJ/MJ Grand Cherokees.

Consider this pair when the rear shocks are the target on a Grand Cherokee within the stated year range and variable valving is a priority. Its two-shock package does not replace all four corners.

Listed on Amazon as: Rough Country 0-2.5" N3 Rear Shocks for 11-22 Jeep Grand Cherokee – 23299_A

#9

9. Rough Country N3 Front Shocks

• Material Type: Rubber
• Compatible with Vehicle Type: 1993-2004 4WD Jeep Grand

Best for: Front N3 pair for lifted ZJ/MJ.

Why it ranks #9: Includes two front shocks for specified older Grand Cherokee applications, but covers only the front and lists 1993–2004 4WD compatibility.

A stated 0.5–3-inch lift range distinguishes these Rough Country N3 front shocks for older Grand Cherokee ZJ/MJ applications. The pair uses 10-stage variable valving and nitrogen charging, features Rough Country describes as balancing off-road action with smooth highway ride quality.

Ten-stage variable valving and a nitrogen charge form the core of the N3 setup, with Rough Country describing the combination as suited to both off-road use and highway ride quality. A 54 mm shock body, fast-cooling design, rubber bushings, and spring-loaded piston rod seal add listed construction details. The package contains two front shocks, so rear shocks are not included. The stated fitment is for 1993–2004 4WD Jeep Grand Cherokee, alongside the title’s ZJ/MJ designation.

Skip it if you need rear shocks for a 2011–2022 Grand Cherokee; Rough Country’s 23299_A N3 pair is listed for that rear application.

This front pair suits owners of listed 1993–2004 4WD Grand Cherokee ZJ/MJ models seeking N3 shocks within the 0.5–3-inch lift range. It does not cover the rear axle.

Listed on Amazon as: Rough Country 0.5-3" N3 Front Shock Absorbers for 86-04 Jeep Grand Cherokee ZJ/MJ -23169_A

#10

10. Skyjacker H7016 Hydro Shock

• Weight: 0.27 g
• Material Type: Polyurethane (PU)
• Compatible with Vehicle Type: Jeep Grand Cherokee (WJ)

Best for: Velocity-sensitive WJ shock.

Why it ranks #10: The listing identifies Jeep Grand Cherokee WJ compatibility and velocity-sensitive valving, but supplies less specific vehicle-year and axle fitment detail.

Multi-stage velocity-sensitive valving lets the Skyjacker H7016 respond to changing shock movement, giving WJ Grand Cherokee owners a feature aimed at stable resistance across slow, fast, rough, and smooth driving. Twin-tube construction and a hardened, double-chrome rod complete the listed design.

Skyjacker says the velocity-sensitive internal components respond to on- and off-road conditions, providing a stable, controlled level of resistance at different speeds and over varied terrain. Twin-tube construction is paired with a 5/8-inch hardened, double-chrome rod, while red polyurethane bushings and a red boot are included. These are relevant construction and included-component details for buyers choosing a shock by design. The product listing identifies WJ compatibility but does not specify a model-year range.

Skip it if you need a stated year range before selecting; Rancho’s RS5000X listing specifies 1999–2004 Grand Cherokee compatibility.

This shock suits WJ Grand Cherokee owners prioritizing velocity-sensitive response across road and terrain changes. The listing gives the WJ designation without model years, so that missing range is a meaningful fit boundary.

Listed on Amazon as: Skyjacker H7016 Softride Hydro Shock Absorber