Best Leveling Kit For Chevy Colorado: Compare 10 Options

#1 · Best Overall

1. Rough Country 2-inch Kit

• Material: Metal
• Material Type: Metal

Best for: Two-inch stance and clearance.

Why it ranks #1: Lists Colorado and Canyon fitment, a two-inch leveling setup, included strut and pre-load spacers, and a limited lifetime replacement warranty.

Rough Country’s two-inch leveling kit pairs upper strut spacers with pre-load spacers to raise the Colorado or Canyon’s front end. That added clearance is intended to help with on- and off-road obstacles, while leveling the front with the rear removes the factory rake for a more even stance.

The included pair of upper strut spacers and pair of pre-load spacers make this a front-suspension kit for owners seeking the listed two-inch lift, rather than a rear-block setup. Rough Country describes the installation as an at-home bolt-on process supported by the company, which suits buyers planning a home installation. The kit is listed for 2015–2022 Colorado and Canyon models; the supplied fitment information does not specify ZR2 exclusions, so check the vehicle details before buying.

Skip it if you need a kit with a listed ZR2 exclusion; ILONPA’s 2-inch kit explicitly states that it does not fit ZR2 models.

Colorado and Canyon owners seeking a two-inch front lift, added obstacle clearance, and an at-home bolt-on approach are the intended buyers. Check the vehicle’s exact fitment and plan the specified recurring fastener checks after installation.

Listed on Amazon as: Rough Country 2" Leveling Kit for 2015-2022 Chevy Colorado/GMC Canyon – 922

#2 · Made in USA

2. Superlift 1.25-inch Kit

• Material: Alloy Steel, Aluminum
• Material Type: Alloy Steel, Aluminum

Best for: Bolt-on alloy-steel lift.

Why it ranks #2: Fits listed Colorado and Canyon models, is made in the USA, and uses a bolt-on installation with factory mounting locations.

Superlift’s 1.25-inch leveling kit uses factory mounting locations and requires no cutting or welding. That installation approach can simplify the work for Colorado and Canyon owners seeking a modest front lift, while the listed fitment excludes ZR2 models.

The kit is listed for 2015–2022 Chevrolet Colorado and GMC Canyon models and includes suspension components, necessary hardware, and installation instructions where applicable. Using factory mounting locations and avoiding cutting or welding gives buyers a clearly described installation path without those fabrication steps. Superlift also says its leveling kits aim to preserve factory ride quality and handling characteristics, a relevant consideration for owners who want a changed stance while retaining familiar driving behavior. The specified lift is 1.25 inches.

Skip it if you need fitment for a ZR2; ReadyLift’s 66-3071 title specifically includes Colorado, Canyon, and ZR2, unlike this kit.

This fits owners of listed 2015–2022 Colorado and Canyon models seeking a 1.25-inch lift and a bolt-on installation without cutting or welding. It is not suitable for ZR2 models.

Listed on Amazon as: SUPERLIFT SUSPENSION 1.25" Leveling Kit for Chevry Colorado/GMC Canyon | Strut Spacers | 40029 | Fits 2015-2022 Chevrolet Colorado / GMC Canyon ( Does Not fit ZR2 Models )

#3 · Smallest Lift

3. ReadyLift 1.25-inch Kit

• Material: Aluminum
• Material Type: Aluminum

Best for: No-cut 1.25-inch lift.

Why it ranks #3: Provides a specified 1.25 inches of front lift, includes installation hardware, and uses a direct bolt-on installation without cutting.

ReadyLift’s 66-3071 provides 1.25 inches of front leveling lift with a direct bolt-on installation that requires no cutting. Those details make it relevant to Colorado and Canyon owners seeking a modest front-height change without the fabrication steps associated with cutting parts.

ReadyLift includes installation hardware with the leveling kit, supporting the stated direct bolt-on installation. The 1.25-inch front lift addresses the factory rake with a smaller change than the two- and three-inch front options in this roundup. Its title names Colorado, Canyon, and ZR2, while the supplied information does not give model-year fitment or further configuration details. Buyers should therefore use the specific vehicle information available to assess fit before choosing this kit.

Skip it if you need an explicitly listed 2015–2022 fitment range; Superlift’s 40029 lists that range for Colorado and Canyon, though it excludes ZR2 models.

This suits buyers seeking a 1.25-inch front lift with a direct bolt-on, no-cut installation. The title names Colorado, Canyon, and ZR2, but model-year fitment is not supplied, so verify the vehicle application.

Listed on Amazon as: ReadyLift 66-3071 1.25" Front Leveling Kit – GM Colorado/Canyon / ZR2

#4 · Mild Leveling

4. Rough Country 1-inch Kit

• Material: Metal
• Material Type: Metal

Best for: Subtle one-inch front leveling.

Why it ranks #4: Its one-inch front spacer setup is designed to retain a slight factory rake while offering a smooth, factory-like ride.

Rough Country’s one-inch upper strut spacers offer a smaller front lift than the two-inch options in this roundup. The modest height is intended to level the Colorado or Canyon while retaining a slight factory rake, making it a fit for owners who want a less pronounced change in stance.

The kit includes two metal upper strut spacers and is listed for 2015–2022 Colorado and Canyon models. Rough Country says the lift maintains a smooth, factory-like ride and increases clearance for on- and off-road obstacles, connecting the mild height change with everyday use and additional obstacle room. The company also describes installation as easy to do at home with its support. The supplied safety information calls for periodic bolt and nut tightness checks after fitting.

Skip it if you want a listed two-inch lift; Rough Country’s 922 kit offers that height for Colorado and Canyon models in the same 2015–2022 range.

Choose this for a mild front-height adjustment that preserves some factory rake rather than a fully level appearance. It is listed for 2015–2022 Colorado and Canyon models, and requires the stated recurring fastener checks.

Listed on Amazon as: Rough Country 1" Leveling Kit for 2015-2022 Chevy Colorado/GMC Canyon – 921

#5

5. ILONPA 2-inch Spacers

• Material: Aluminum
• Material Type: Aluminum

Best for: Aluminum front-spacer lift.

Why it ranks #5: Lists Colorado and Canyon fitment with an explicit exclusion for one off-road trim, aluminum construction, and a 12-month warranty.

ILONPA uses aluminum strut spacers for a listed two-inch front lift on 2015–2022 Chevy Colorado and GMC Canyon models. The front-only setup aims to create a more aggressive stance and add fender clearance, giving owners a straightforward way to alter the truck’s front height without choosing a front-and-rear kit.

The kit is supplied as a set of two spacers with housing, and ILONPA notes that spacer thickness is less than two inches because suspension geometry means thickness and lift height are not a one-to-one match. That detail helps set expectations when comparing lift figures. The listed vehicle range excludes ZR2 models, and the manufacturer recommends an alignment after installation, so buyers should account for that follow-up step when planning the work.

Skip it if you own a ZR2 or want a front-and-rear lift; KSP Performance’s 3-inch-front, 2-inch-rear kit is another listed option for non-ZR2 trucks.

This suits Colorado and Canyon owners seeking aluminum front spacers and a more aggressive front stance. It is not for ZR2 models, and the recommended post-installation alignment should be part of the installation plan.

Listed on Amazon as: 2" Front Leveling Lift Kit Strut Spacers Compatible with 2015-2022 Chevy Colorado, GMC Canyon, Raise Front Suspension Struts by 2 inch, Set of 2

#6

6. Autsurles 2-inch Kit

• Material: Aluminium
• Material Type: Aluminium

Best for: Wrought-iron spacer kit.

Why it ranks #6: Lists two-wheel- and four-wheel-drive fitment for Colorado and Canyon, excludes one off-road trim, and specifies a two-year warranty.

Autsurles specifies wrought iron and solid 12.9-grade bolts for its two-inch front leveling kit. That combination makes durability the defining feature in the supplied description, while the stated lift targets Colorado and Canyon owners seeking a higher front stance without adding rear lift blocks.

The kit is listed for 2015–2022 Chevy Colorado and GMC Canyon models in both 2WD and 4WD, but excludes ZR2 versions. Autsurles notes that suspension geometry means kit thickness does not translate one-to-one into lift height, a useful distinction when comparing spacer dimensions with the stated two-inch vehicle lift. The manufacturer recommends an alignment after installation. Its wrought-iron construction, 12.9-grade bolts, and CNC processing are the listed construction details buyers can weigh.

Skip it if you own a ZR2 or want a stated front-and-rear lift; maXpeedingrods lists a 3-inch front and 2-inch rear setup for non-ZR2 models.

This is for 2015–2022 Colorado and Canyon owners seeking a two-inch front lift with the listed wrought-iron and high-grade bolt construction. It excludes ZR2 models, and the manufacturer recommends alignment after installation.

Listed on Amazon as: 2 inch Front Leveling Kits Lift Kit Fit for 2015-2022 Chevy Colorado 2WD 4WD GMC Canyon 2WD 4WD Front Strut Spacers

#7

7. BIGLKNM 2-inch Kit

• Material: Metal
• Material Type: Metal

Best for: Two-inch kit for 2WD or 4WD.

Why it ranks #7: Lists Colorado and Canyon fitment across two- and four-wheel drive, includes upper strut and pre-load spacers, and has a one-year warranty.

BIGLKNM lists its two-inch leveling kit for 2015–2022 Colorado and Canyon models in both 2WD and 4WD configurations. That broad stated drivetrain coverage, paired with upper strut and pre-load spacers, makes it an option for owners seeking a front lift and a more level stance.

The included two upper strut spacers, two pre-load spacers, and hardware form the components of the listed kit. BIGLKNM says the installation requires no cutting or drilling and identifies a spring compressor, impact wrench, and ratchet wrench in its instructions, giving buyers specific tools to consider before starting. The manufacturer also describes the result as added clearance and a level front-to-rear appearance while maintaining smooth OEM driving. The listed coverage includes 2WD and 4WD trucks.

Skip it if you need an explicit ZR2 exclusion or inclusion; ILONPA clearly states its 2-inch kit does not fit ZR2 models.

This is for 2015–2022 Colorado and Canyon owners seeking a two-inch kit across listed 2WD and 4WD configurations. Plan around the named installation tools, and resolve ZR2 fitment before purchase.

Listed on Amazon as: 2 Inch Leveling Kit for Chevy Colorado GMC Canyon 4WD 2WD 2015-2022  

#8 · Front-Rear Lift

8. KSP Performance Front-Rear Kit

• Material: Carbon Steel
• Material Type: Carbon Steel

Best for: Front-and-rear lift setup.

Why it ranks #8: Combines a stated 2.75-inch front lift with a two-inch rear block and includes extended U-bolts; the listing excludes one off-road trim.

KSP Performance combines front strut spacers with rear lift blocks and extended U-bolts, giving this kit a front-and-rear approach rather than a front-only spacer lift. Its listed setup targets a 2.75-inch front lift and a two-inch rear lift, for buyers seeking a more substantial overall stance.

The kit includes two front strut spacers, two rear lift blocks, and four extended U-bolts, so its contents address both ends of the truck. KSP specifies that the front spacer’s thickness is less than two inches even though the resulting front lift can reach 2.75 inches; the rear block lift matches its thickness. The steel construction and stated exclusion of ZR2 models are important selection details. The included installation instructions support planning the multi-component installation.

Skip it if you want only a mild front adjustment; Rough Country’s one-inch 921 kit is a listed front-only option for Colorado and Canyon models.

This suits non-ZR2 owners looking for a pronounced front-and-rear lift and prepared to install spacers, blocks, and extended U-bolts. Check the stated lift-height details carefully, since front spacer thickness is not the resulting lift.

Listed on Amazon as: KSP Chevy Canyon Lift Kits 2015-2021, 3"F+2"R GMC Colorado Leveling Kit

#9

9. maXpeedingrods 3-plus-2 Kit

• Material: Zinc
• Material Type: Zinc

Best for: Larger-tire front-and-rear lift.

Why it ranks #9: Offers a three-inch front and two-inch rear lift, but excludes one off-road trim and is a larger front-and-rear setup rather than a simple leveling spacer.

maXpeedingrods pairs a three-inch front lift with a two-inch rear lift and lists tire clearance for sizes up to 31 inches. That combination serves Colorado and Canyon owners looking for a more aggressive stance, greater ground clearance, and room for larger tires than a front-only leveling kit provides.

The kit is listed for 2015–2022 Colorado and Canyon 2WD and 4WD models, excluding ZR2, and includes a front strut spacer and installation hardware. Its front-and-rear lift figures address both ends of the truck, while the stated 31-inch tire capacity gives buyers a specific reference when planning wheel and tire changes. The estimated installation time is two to four hours, which helps set expectations for the work involved. Check the listed ZR2 exclusion before selecting it.

Skip it if you own a ZR2 or only want a modest front lift; Superlift’s 1.25-inch 40029 is a smaller listed option for non-ZR2 trucks.

This suits non-ZR2 Colorado and Canyon owners seeking front-and-rear lift and clearance for tires up to 31 inches. Its larger lift and stated two-to-four-hour installation estimate are relevant planning considerations.

Listed on Amazon as: 3" Front & 2" Rear Leveling Lift Kit for Chevy Colorado/GMC Canyon 2WD/4WD 2015-2022 | Front Strut Spacer, Rear Lift Block, Sway Bar Mounts Spacer

#10

10. C-Tzu 2-inch Kit

• Material: Metal
• Material Type: Metal

Best for: Broad Colorado and Canyon coverage.

Why it ranks #10: Lists Colorado and Canyon fitment and includes strut and pre-load spacers, but excludes several suspension configurations and provides limited warranty detail.

C-Tzu lists its two-inch leveling kit for 2015–2022 Colorado and Canyon models in both 2WD and 4WD configurations. The included upper strut and pre-load spacers make it a front-lift option for owners seeking a more level stance, subject to its stated suspension exclusions.

The kit contains two upper strut spacers, two pre-load spacers, and hardware, giving buyers the listed components for the leveling setup. Its compatibility notes name Colorado and Canyon 2WD and 4WD models, while explicitly excluding Trail Boss, ZR2, and vehicles with Multimatic DSSV suspension, including AT4X. Those exclusions make trim and suspension identification essential before ordering. The supplied title mentions 2015–2023, but the detailed compatibility text specifies 2015–2022, so use that stated range when assessing fit.

Skip it if you have a Trail Boss, ZR2, or Multimatic DSSV suspension; ReadyLift’s 66-3071 title includes ZR2, though its model-year details are not supplied.

This suits 2015–2022 Colorado and Canyon owners seeking a two-inch setup and whose truck matches the detailed compatibility notes. It excludes Trail Boss, ZR2, and Multimatic DSSV-equipped models, including AT4X.

Listed on Amazon as: 2" Leveling Kit for Chevy Colorado GMC Canyon 2wd/4wd 2015-2023 – 922