Best Struts For Honda Accord: Compare Complete and Front Sets

#1 · Best Overall

1. Complete Struts Complete Assemblies

• Material Type: Rubber, Spring Steel
• Compatible with Vehicle Type: Car
• Weight: 80 lb

Best for: Full-set 2003–2007 replacement.

Why it ranks #1: The set supplies two front and two rear complete assemblies for 2003–2007 Accords, excluding hybrids, so it covers all four corners.

A four-piece package supplies two front and two rear complete strut assemblies with coil springs for 2003–2007 Honda Accords. Because the assemblies arrive complete, the set avoids rebuilding the old struts and replaces their components together, making it a practical option for buyers planning a front-and-rear suspension refresh.

The front-and-rear coverage means one purchase addresses all four corners, while the complete assemblies remove the need to rebuild the existing struts. Rubber and spring-steel construction are specified for the set. Its application is limited to 2003–2007 Accords and explicitly excludes hybrid models, so it suits owners within that range rather than later cars or hybrids. After installation, the supplied guidance recommends inspecting control-arm bushings and ball joints and getting an alignment to restore factory suspension settings.

Skip it if you own a hybrid Accord or a model outside 2003–2007; this set is listed only for non-hybrid cars in that year range.

Choose this set for a non-hybrid 2003–2007 Accord when replacing both front and rear assemblies together. Plan for a post-installation alignment, and inspect bushings and ball joints as recommended before settling the suspension.

Listed on Amazon as: COMPLETESTRUTS – Front & Rear Complete Strut Assemblies with Coil Springs Replacement for 2003-2007 Honda Accord – Set of 4

#2 · Best Full-Corner Kit

2. Detroit Axle 2.4L Struts

• Material Type: Rubber, Spring Steel
• Compatible with Vehicle Type: Car

Best for: 2.4L sedan and coupe set.

Why it ranks #2: It includes four front and rear struts with coil springs for 2008–2012 2.4L sedan and coupe models, with a stated 10-year warranty.

Four front-and-rear struts with coil springs make this Detroit Axle kit a complete suspension-set option for 2008–2012 Honda Accord 2.4L sedans and coupes. The ready-to-install assemblies are specified to require no additional work or special tools, simplifying the installation workflow.

With four assemblies covering the front and rear and coil springs included, the kit groups the listed components for a full-set replacement. Detroit Axle describes its assemblies as ready for installation without additional work or special tools, a practical benefit for the installation process. Impact, wear, and fatigue testing is also specified. Fitment is limited to 2008–2012 2.4L sedan and coupe applications, so body style and engine are central selection checks.

Skip it if you have a 2008–2012 Accord with a 3.5L engine; GDSMOTU 808178-5263-1350594582 lists specified 3.5L applications from those years.

This kit suits owners replacing front and rear suspension assemblies on a 2008–2012 2.4L Accord sedan or coupe. Its all-four-corners coverage is useful, but the stated engine and body-style fitment is the boundary.

Listed on Amazon as: Detroit Axle – 2.4L Struts for 2008-2012 Honda Accord Sedan Coupe

#3 · Best Newer 1.5L Kit

3. Detroit Axle 1.5L Kit

• Weight: 50 lb

Best for: 1.5L front-and-rear suspension kit.

Why it ranks #3: This kit combines two front struts with coil springs and two rear shocks for specified 2018–2022 1.5L trims and transmissions.

Detroit Axle pairs two front struts with coil-spring assemblies and two rear shock absorbers for specified 2018–2022 1.5L Honda Accords. The mixed front-strut and rear-shock configuration gives buyers coverage at both ends while matching the listed engine and trim applications.

The kit’s front assemblies include coil springs, while the rear components are shock absorbers, so buyers get the different listed components for each end in one package. Detroit Axle says the complete front assemblies are ready to install without additional work or special tools, simplifying that part of the job. The application is limited by model year, 1.5L engine, and listed trim/transmission details; check those boundaries before choosing it for an Accord.

Skip it if you own a 2018–2022 Accord with an engine other than 1.5L; A-Premium APSA2448 also lists front assemblies, but only for specified 1.5L applications.

This kit fits owners addressing front and rear suspension components on a listed 1.5L Accord, with trims and transmission varying by year. Its front-strut/rear-shock mix and application limits should guide the fit decision.

Listed on Amazon as: Detroit Axle – 1.5L Struts Kit for 2018 2019 2020 2021 2022 Honda Accord

#4 · Best Four-Piece Set

4. KUIPERAUTO 2013–2017 Assembly

• Material Type: Steel
• Compatible with Vehicle Type: Truck

Best for: Four-piece 2013–2017 set.

Why it ranks #4: Its four-piece front-and-rear assembly listing targets 2013–2017 Accords and identifies OEM references 172971, 172970, and 172984.

Four front-and-rear strut and shock assemblies are the defining feature of KUIPERAUTO’s 2013–2017 Accord package. That coverage lets owners address both ends of the car in one replacement set, while the micro-polished, double-chrome-plated steel rod targets durability in the strut’s working component.

The set combines front and rear assemblies with steel rods treated by micro-polishing and double chrome plating, which the listing presents as a durability measure. Oil seals and a sturdy dust cover are intended to help resist impacts, leakage, and deformation; the stated temperature stability also supports operation across varying temperature environments. Its listed vehicle application is the 2013–2017 Honda Accord, making the year range a key fitment boundary when selecting the package.

Skip it if you need parts for an Accord outside 2013–2017; A-Premium APSA2448 covers specified 2018–2022 1.5L front applications instead.

This package suits owners replacing front and rear components on a 2013–2017 Accord who value the specified rod treatment, seals, and dust cover. Its stated year range is the important boundary; later Accords require a different application.

Listed on Amazon as: KUIPERAUTO 4PCS Front and Rear Struts Shocks Absorbers & Coil Spring Assembly Compatible for 2013-2017 Honda Accord Replacement 171451 171452 172984

#5

5. ECCPP 2003–2007 Struts

• Compatible with Vehicle Type: Car
• Weight: 59.5 lb

Best for: Front-and-rear 2003–2007 set.

Why it ranks #5: The listing targets 2003–2007 Accords and describes front and rear pair assemblies, but its included-component text also references other vehicle years.

Front-and-rear complete strut-and-spring assemblies are the central feature of ECCPP’s listing for 2003–2007 Honda Accords. The package aims to cover both ends in one purchase, while its specified SAE9254 spring steel and surface treatment give buyers material details beyond the fitment range.

The listing identifies a complete front-and-rear strut and spring assembly set, a useful arrangement for buyers planning work at both ends rather than ordering only front parts. ECCPP specifies SAE9254 spring steel and a special surface treatment, which it associates with strength, toughness, and corrosion resistance. It also describes vibration attenuation through the frame and body. The stated Accord application is 2003–2007, so the generation range remains central to choosing this kit.

Skip it if you own an Accord outside 2003–2007; Detroit Axle 10083-4 is listed for 2008–2012 2.4L sedan and coupe models.

This ECCPP set is for owners refreshing front and rear suspension assemblies on a 2003–2007 Accord. Its material details may help narrow the choice, but the stated model-year range does not cover newer generations.

Listed on Amazon as: ECCPP Complete Struts Spring for 2003-2007 for Honda for Accord

#6

6. Peforway 2.4L Struts

• Material Type: Iron, Steel
• Compatible with Vehicle Type: Car

Best for: 2.4L Accord suspension components.

Why it ranks #6: This 2013–2017 2.4L listing includes front strut assemblies and several sway bar links; the supplied component list is incomplete.

A 2.4L-only application is the key distinction of this Peforway listing for 2013–2017 Honda Accords. Its specified components include front strut-and-coil-spring assemblies and sway-bar links, giving buyers a package that reaches beyond struts alone when addressing listed suspension parts.

The component details identify driver- and passenger-side front strut and coil-spring assemblies, plus front sway-bar links for both sides and a rear driver-side sway-bar link. That combination can consolidate several listed replacement parts into one order, rather than limiting the package to struts. The listing specifies iron and steel materials and a two-year warranty. Fitment is expressly tied to 2013–2017 Accord 2.4L models, so engine and year must match the application.

Skip it if you have a 2013–2017 Accord with a different engine; KUIPERAUTO K104GJ549550551X2 lists the model years without a 2.4L-only restriction.

Consider this listing if your 2013–2017 Accord has the 2.4L engine and you also need the specifically listed sway-bar links. The component list is not a universal Accord fitment, so engine application matters.

Listed on Amazon as: Struts Fit for Honda Accord (2.4L) 2013-2017 Front and Rear

#7 · Best Older Front Pair

7. ECCPP Front Struts

• Material Type: Spring Steel
• Compatible with Vehicle Type: struts for 2001 2002 2003 for Acura CL 1999…

Best for: Front struts for older Accords.

Why it ranks #7: The front-pair assembly is listed for 1998–2002 Accords, with spring steel construction and a one-year warranty.

SAE9254 spring steel is the specified spring material in ECCPP’s front strut assembly listing for 1998–2002 Honda Accords. Paired with the complete strut assembly, that spring specification gives owners of these older models a front-end replacement option rather than a rear suspension kit.

The listing combines a strut and spring assembly and identifies SAE9254 spring steel, with special surface treatment described as supporting strength, toughness, and corrosion resistance. ECCPP also says the assembly helps attenuate vibration through the frame and body, connecting the component’s function to ride impacts. The application covers 1998–2002 Accords, and the style is identified as front-pair struts, so it addresses the front rather than a complete four-corner refresh.

Skip it if you need rear suspension parts in the same package; Complete Struts 4-AA87A-AC0C0-001 includes front and rear assemblies for 2003–2007 non-hybrid Accords.

Choose this ECCPP listing when replacing front struts on a 1998–2002 Accord and the spring-steel specification suits your priorities. It does not cover the rear, and its stated year range ends before later Accord generations.

Listed on Amazon as: ECCPP Complete Struts Spring Assembly Front Struts Fit for Honda for Accord

#8

8. A-Premium Front Assemblies

• Weight: 42.9 lb

Best for: Front pair for 1.5L Accords.

Why it ranks #8: This set of two front gas struts fits specified 2018–2022 1.5L trims, with some year and trim limits differing within the range.

A set of two gas-type, double-pipe front complete strut assemblies is the focus of A-Premium’s listing for specified 2018–2022 1.5L Accord trims. The direct-replacement format provides a front-pair option for buyers who do not need rear components in this order.

The pair is specified for the front, with gas shock type and a double-pipe system, giving buyers concrete construction details for comparing replacement assemblies. A stated extended length of 20.12 inches further identifies the unit, while direct-replacement fitment indicates its intended replacement role. The application varies by year and trim, but is confined to listed 1.5L Accord configurations; this is a front set, not a package covering rear shocks or struts.

Skip it if you want front and rear components together; Detroit Axle 4AQ471817 includes front struts and rear shocks for listed 2018–2022 1.5L Accords.

This pair suits owners replacing the front assemblies on a listed 2018–2022 1.5L Accord, especially when direct-replacement fitment is the priority. Check the year-and-trim application, and source rear components separately if needed.

Listed on Amazon as: A-Premium Front Complete Strut Assemblies with Coil Springs, Set of 2

#9

9. GDSMOTU Front Assemblies

• Weight: 61.7 lb

Best for: Front pair for 2008–2012 Accords.

Why it ranks #9: It supplies two front assemblies for listed 2008–2012 2.4L and 3.5L trims, rather than a complete front-and-rear kit.

Two front struts with coil-spring assemblies define this GDSMOTU package for specified 2008–2012 Honda Accord 2.4L and 3.5L trims. The front-pair format suits owners replacing the front assemblies without ordering rear components as part of the same package.

The two listed front assemblies include coil springs, consolidating those parts for a front-end replacement. Fitment spans specified 2.4L EX/LX models from 2008–2012 and specified 3.5L EX, EX-L, and HFP applications, with year differences for the 3.5L trim list. The listing notes that the assemblies may arrive in two packages or separate packages because of batch, length, and weight; it states performance and use remain consistent.

Skip it if you need front and rear parts together; Detroit Axle 10083-4 lists four assemblies for 2008–2012 2.4L sedans and coupes.

This GDSMOTU pair suits owners replacing front assemblies on a listed 2008–2012 2.4L or 3.5L Accord trim. Check the year-specific application, and note that rear suspension parts require a separate purchase.

Listed on Amazon as: GDSMOMTU Strut Shock Assembly Fit 2008-2012 for Honda for Accord 2.4L/3.5L

#10

10. CCIYU V6 Front Struts

• Weight: 38.9 lb

Best for: V6-only 2013–2017 front pair.

Why it ranks #10: Its front pair is restricted to 2013–2017 V6 3.5L Accords, making it a narrow option compared with broader-year or full-car kits.

Fitment restricted to 2013–2017 Honda Accord V6 3.5L models distinguishes this cciyu front strut listing. Its complete assembly incorporates the coil spring, combining those components in a front replacement unit for owners whose engine and model years match the stated application.

The listing describes a strut assembly that incorporates the coil spring, which combines the spring and strut in one unit rather than treating them as separate replacement pieces. Its stated front application is limited to 2013–2017 V6 3.5L Accords, a crucial boundary for buyers comparing listings from the same generation. Cciyu also specifies an oil seal and high-strength piston rod, alongside advanced material and easy-installation features, as part of the assembly’s stated construction.

Skip it if you have a 2013–2017 Accord with a 2.4L engine; Peforway PR5618 specifically lists that engine application and includes front sway-bar links.

Choose this cciyu listing for a matching 2013–2017 V6 3.5L Accord when replacing the front complete assembly. The V6-only fitment is the key boundary; it is not listed for the generation’s 2.4L models.

Listed on Amazon as: CCIYU Front Complete Strut shock and Strut Fit for Honda for Accord 13-17