Best Utv Chase Lights for UTVs and Off-Road Rigs

#1 · Best Overall

1. Xprite 36-Inch Chase Bar

• Dimensions: 43 x 4 x 3 in
• Weight: 4 lb
• Voltage: 12 V

Best for: Drivers wanting independent light controls.

Why it ranks #1: Its 36-inch, six-block layout combines running, stop, turn, strobe and reverse or lighting functions, with seven amber strobe patterns and a 116-inch cord.

Six separately assigned LED blocks give the 36-inch Xprite chase bar distinct running, stop, turn, strobe, and lighting or reverse functions. That layout helps UTV drivers combine rear signaling and attention-getting amber flashes in one bar, with the brake, reverse, and strobe patterns independently controlled.

The aluminum 36-inch bar runs on 12 volts and has a flood lens, pairing a wide-format rear light with a setup intended to improve visibility in poor weather. Amber strobes offer seven patterns plus solid light, so drivers can choose a flash style rather than rely on one sequence. Two types of switch controls are included, and the 116-inch cord gives a stated wire length from bar to wire end for installation planning.

Skip it if you need a compact rear bar for a tight mounting area; its listed length is 36 inches.

Choose it if your UTV has room for a 36-inch rear bar and you want separately controlled brake, reverse, and strobe patterns. Check the available mounting width and plan wiring around its 116-inch cord.

Listed on Amazon as: Xprite 36" Rear LED Chase Light Bars, w/Strobe Brake Reverse Turn Signal

#2 · Best Included Harness

2. KEMIMOTO 30-Inch Chase Bar

• Dimensions: 32.28"L x 3.74"W x 3.54"H
• Weight: 4 lb
• Voltage: 12 V

Best for: Polaris and Honda fitment shoppers.

Why it ranks #2: The 30-inch, five-block bar offers running, stop, turn, strobe and lighting or reverse functions, and includes switch harnesses, brackets and an extension cable.

A supplied three-pin extension cable and two switch-harness options make this 30-inch KEMIMOTO chase bar notable for buyers planning their wiring setup. Its five LED blocks combine running, stop, turn, strobe, and center lighting or reverse functions, giving off-road drivers several rear-light roles in one assembly.

The aluminum bar uses five blocks with six high-power LEDs each and a flood lens, supporting rear visibility in fog, rain, and snow. Blocks at the ends handle running, stop, and turn signals; the inner blocks provide seven strobe patterns, while the center block handles lighting or reverse. The package lists a three-pin extension cable, mounting brackets and screws, plus rocker-switch and in-line dual-switch harnesses, giving installers multiple wiring components to work with.

Skip it if you require a stated wire-run measurement before installation; the listing gives no exact harness length.

Consider it for a 12-volt UTV, especially if its listed Polaris or Honda compatibility matches your vehicle. The 30-inch bar, extension cable, brackets, and two switch-harness types suit buyers who want those components included.

Listed on Amazon as: KEMIMOTO 30 inch UTV Chase Light Bar with Extension Harness LED Tail Light

#3 · Best Pattern Control

3. Xprite 30-Inch Chase Bar

• Dimensions: 30 x 2.5 x 2.5 in
• Weight: 4 lb
• Voltage: 12 V

Best for: Buyers wanting five-block signaling.

Why it ranks #3: Its five-block, 30-inch layout includes running, stop, turn, strobe and reverse functions; amber strobes offer seven patterns and separately controlled functions.

A five-block layout puts running, stop, and turn signals at the ends, strobe lights beside them, and lighting or reverse in the center. This 30-inch Xprite bar lets UTV and ATV drivers consolidate several rear-light functions, while its amber strobe system offers seven patterns plus a solid setting.

The 12-volt bar has a flood lens and a listed 30-watt rating, linking a wide rear light to a modest, defined electrical specification for vehicle planning. Its polycarbonate lens and waterproof feature are listed alongside compatibility with ATV, truck, and UTV use. Amber patterns include alternating fast and slow options, and the brake, reverse, and strobe patterns can be independently controlled, allowing those functions to be managed separately.

Skip it if you need vehicle-by-vehicle fitment confirmation from a listed model chart; this page gives only broad vehicle categories.

Choose this Xprite if a 30-inch bar with separate signaling, strobe, and center lighting or reverse functions suits your 12-volt ATV, truck, or UTV. Its listed compatibility is broad rather than model-specific.

Listed on Amazon as: Xprite 30" LED Chase Strobe Light Bar, Offroad Safety Flashing Lightbar

#4 · Most Flash Modes

4. OFFROADTOWN 20-Inch Chase Bar

• Dimensions: 20.27 x 3.15 x 3.15 in
• Voltage: 12 V DC

Best for: Compact-bar buyers wanting many modes.

Why it ranks #4: This 20-inch, five-block bar lists nine warning modes and three signal modes, with an aluminum body and an included in-line dual switch.

At 20.27 inches long, this OFFROADTOWN bar offers a compact listed length alongside nine warning modes and three signal modes. Its 18 LED chips span five blocks in white, red, and amber, giving UTV owners a multi-color rear-light option where a longer bar may not suit the available space.

The aluminum housing and 12-volt direct-current specification provide practical construction and electrical details for installation planning. Nine warning modes and three signal modes give drivers multiple listed operating choices, while the five-block layout groups 18 LED chips across the bar. An in-line dual switch is included, and compatibility lists UTVs, several Polaris RZR models, Can-Am Maverick X3, Yamaha, dune buggy, golf cart, SUV, and other off-road vehicles.

Skip it if you need a clearly listed reverse-light function; the supplied details identify warning and signal modes instead.

Pick this OFFROADTOWN bar if a roughly 20-inch footprint and multiple warning and signal modes suit your rear setup. Its listed vehicle range is broad, but buyers requiring a specified reverse function should look elsewhere.

Listed on Amazon as: OFFROADTOWN 20" LED Chase Light Bar UTV Slim Rear Chase Light Bar

#5

5. TRUE MODS 28-Inch Chase Bar

• Dimensions: 36 x 3.5 x 3.5 in
• Voltage: 12 V

Best for: Riders wanting scanner-style rear signals.

Why it ranks #5: The 28-inch bar combines amber strobes, a central white scanner and red brake lights and turn signals, with eight listed flash patterns.

A central white scanner sits between amber strobes in this 28-inch TRUE MODS chase bar, creating a distinctive rear-light layout for UTV riders. Its listed eight flash patterns join brake lights, turn signals, and running lights, so the bar combines attention-getting effects with familiar vehicle signaling.

The stair-step LED arrangement and aluminum body give the bar a shaped layout and a specified metal construction. Its central white scanner and amber strobes are paired with eight flash patterns, while red hyper-flashing brake lights and turn signals add distinct signaling functions. The product is listed for 12-volt vehicles and ATV, truck, and UTV use; its stated dimensions are 36 by 3.5 by 3.5 inches, relevant when checking rear mounting space.

Skip it if you cannot accommodate the listed 36-inch dimension; the title's 28-inch figure differs from the specification.

Consider this bar if you want a scanner-and-strobe layout with eight patterns and integrated brake and turn signaling. Resolve the 28-inch title versus 36-inch listed dimension before deciding whether it fits your rear mounting area.

Listed on Amazon as: TRUE MODS 28" LED Chase Light Bar for UTV Polaris RZR Can-Am Maverick X3

#6

6. Lupar 30-Inch Chase Bar

• Weight: 1.97 kg
• Voltage: 12 V

Best for: Roll-cage bar buyers.

Why it ranks #6: Its 30-inch, five-module design assigns modules to running, stop, turn, strobe, lighting and reversing functions; aluminum construction is listed.

A supplied roll-cage bracket for 1.75-to-2-inch tubing makes the Lupar 30-inch chase bar particularly relevant to buyers checking cage mounting. Its five independent LED modules assign running, stop, and turn signals, strobe, and lighting or reverse functions, combining multiple rear-light tasks in one bar.

Each of the five independent modules contains six high-power LED beads, and the high-transmittance PC lens is described as helping light penetrate rain and snow. The aluminum bar runs on 12 volts, providing useful material and power details for vehicle planning. Separate modules assign signaling, strobe, and lighting or reverse duties, while the stated roll-cage bracket range helps narrow whether the included mounting approach suits the cage tubing.

Skip it if you require a published number of strobe patterns before choosing; the listing does not provide one.

This Lupar suits UTV owners seeking a 30-inch, five-module bar and a bracket for 1.75-to-2-inch roll-cage tubing. Verify the cage dimensions and whether the listed function set matches your wiring needs.

Listed on Amazon as: 30'' UTV LED Chase Light Bar w/ 1.75''-2'' Roll Cage Mount Bracket

#7

7. OFFROADTOWN 20-Inch Chase Bar

• Dimensions: 20 x 2 x 2 in
• Weight: 1.13 kg
• Voltage: 12 V DC

Best for: Broad-voltage off-road vehicle owners.

Why it ranks #7: This 20-inch aluminum bar supports 9–30-volt vehicles and lists eight flashing lights and three signal lights for a broad range of off-road applications.

A 9-to-30-volt vehicle range sets this 20-inch OFFROADTOWN chase bar apart for buyers whose electrical system falls within those listed limits. Its aluminum housing measures 20 by 2 by 2 inches, and eight flashing lights plus three signal lights cover several rear-lighting roles.

The stated 9-to-30-volt compatibility spans more than a single 12-volt specification, with UTV, side-by-side, SXS, pickup, truck, tractor, watercraft, and other vehicle categories listed. Eight flashing lights and three signal lights support distinct attention and signaling tasks, while the 20-by-2-by-2-inch aluminum bar gives a compact mounting profile to consider. The product description specifically identifies rainy, foggy, snowy, sandstorm, and muddy conditions among its intended situations.

Skip it if you need confirmation that a switch or harness comes in the package; the supplied details do not list one.

Consider it if your vehicle falls within the stated 9-to-30-volt range and you want a compact bar with eight flashes and three signal lights. Check wiring and control needs before installation.

Listed on Amazon as: OFFROADTOWN 20 Inch LED Chase Light Bar UTV Rear Chasing Lights Safety Flashing Light w/Reverse Brake Turn Signal Light Offroad Emergency Strobe Bar for Polaris RZR Can-Am X3 Yamaha Honda SXS

#8 · Slim Profile

8. Xprite 25-Inch Chase Bar

• Weight: 1.81 kg
• Voltage: 12 V

Best for: Low-profile roll-cage installations.

Why it ranks #8: The 25-inch bar has a listed 1.0-inch ultra-thin profile and four blocks for running, brake and strobe or dust-light functions.

An ultra-thin 1.0-inch profile and adjustable stand give this 25-inch Xprite chase bar a useful distinction for buyers managing rear clearance. Four LED blocks divide running and brake lights from strobe or dust-light functions, providing core signaling and attention modes in a slim bar.

The adjustable stand is listed alongside compatibility with 1.75-to-2-inch roll cages, helping buyers assess both mounting adjustment and tubing range. Four blocks with six high-power LEDs each use a flood lens, and the 12-volt bar assigns its outer blocks to running and brake lights and inner blocks to strobe or dust lighting. Its shockproof and corrosion-resistant materials are listed for off-road use; the 25-inch length still requires adequate rear space.

Skip it if you need a reverse-light function in the bar; its listed blocks cover running, brake, strobe, or dust light.

Choose this Xprite for a low-profile 25-inch bar when adjustable mounting and 1.75-to-2-inch roll-cage compatibility suit your setup. Its listed functions cover running, brake, strobe, and dust light, not reverse.

Listed on Amazon as: Xprite 25" LED Chase Light Bar, 1.0" Ultra-Thin Offroad Rear Chase Light

#9

9. Rough Country Multi-Functional Chase Light

• Dimensions: 22.1 x 4 x 5 in
• Voltage: 12 V

Best for: Custom-wiring focused installers.

Why it ranks #9: This 12-volt multi-function light lists courtesy, license-plate, running, brake, reverse and amber strobe options, but switches are not included.

Its key distinction is an explicit wiring requirement: switches are not included, and several functions must connect to existing wiring or separate switches. The Rough Country multi-functional chase light lists courtesy or license plate, running, brake, reverse, and amber strobe options for buyers comfortable planning those connections.

The 12-volt light kit provides a multi-function rear-lighting approach, but its installation workflow depends on wiring choices rather than supplied switches. Courtesy or license plate, running, brake, and reverse functions must be connected to existing wiring or separate switches; the amber strobe function requires a separate switch. Knowing those requirements up front helps installers plan controls and connections before mounting. Its polycarbonate lens and universal vehicle compatibility are also listed.

Skip it if you want a chase light with switches and harnesses supplied; this kit excludes switches and requires separate wiring.

Choose this Rough Country kit if you can plan the wiring and provide switches for the listed functions. Its universal compatibility is useful for varied vehicles, but buyers seeking a ready-to-switch package should note the installation requirements.

Listed on Amazon as: Rough Country LED Multi-Functional Chase Light | 5 Modes – 70708

#10

10. KEMIMOTO Roll-Bar Chase Light

• Weight: 16 oz

Best for: Night drivers needing reverse illumination.

Why it ranks #10: This compact roll-bar light offers running, brake, reverse, courtesy and strobe modes, but it is a single light rather than a multi-block chase bar.

A 716-lumen rear-facing white reverse and area light gives this KEMIMOTO compact chase light a clear role beyond signaling. Its five modes cover strobe, courtesy, reverse, running, and brake functions, while red and white halo colors let drivers choose between two appearance options.

The rear-facing white LED is rated at 716 lumens, while a separate downward-facing courtesy or cargo light is rated at 169 lumens. Those directions serve different tasks: rear illumination when reversing and downward light around cargo. The light automatically shows highlight red when braking, lowlight red while driving, and white in reverse. Its listed roll-bar range of 1.75 to 2 inches helps buyers assess mounting fit before installation.

Skip it if you want a wide multi-block bar across the rear; this compact roll-bar light has a different form factor.

Pick it for a UTV night-driving setup where reverse illumination and a downward cargo courtesy light matter alongside brake and running signals. Check that your roll bar falls within the listed 1.75-to-2-inch range.

Listed on Amazon as: KEMIMOTO UTV Chase Light LED IP65 Waterproof 5 Modes 1.75''-2" Roll Bar