Best Jacks For Trucks: Floor, Bottle, and Farm Jacks Compared

#1 · Best Overall

1. BIG RED 3 Ton Floor Jack

• Load Capacity: 3 tons (6,000 lbs)
• Material: Steel

Best for: SUV and extended-height truck servicing.

Why it ranks #1: Its 3-ton capacity, truck and SUV fit, 5-7/8- to 20-7/8-inch range, and included extra saddle suit varied truck lifting needs.

A 20-7/8-inch maximum lift gives the BIG RED T83006 useful reach for SUVs and extended-height trucks, while its 3-ton capacity covers loads up to 6,000 pounds. Its trolley format and four casters support maneuvering the jack around a garage or service area.

The 5-7/8-inch minimum height sets the clearance needed to position this floor jack, while the 20-7/8-inch maximum supports taller lifting tasks. Its steel construction and 3-ton capacity suit the listed cars, trucks, vans, and SUVs. Two large steel casters and two 360-degree swivel casters help roll and turn the trolley into position, but its 36-pound weight remains a consideration when carrying it rather than rolling it.

Skip it if you prioritize carrying weight over trolley maneuverability; the BIG RED T90413 bottle jack weighs 6.2 pounds and lifts up to 8,000 pounds.

This BIG RED floor jack suits garage users lifting SUVs or extended-height trucks who need a 20-7/8-inch maximum. Check that the 5-7/8-inch minimum clears the vehicle before positioning.

Listed on Amazon as: BIG RED Hydraulic Trolley Service/Floor Jack with Extra Saddle (Fits: SUVs and Extended Height Trucks): 3 Ton (6,000 lb) Capacity, Red, T83006

#2 · Pickup Lift Range

2. AUTOWN 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel, Aluminum
• Dimensions: 23.4 x 7.4 x 7.5 in

Best for: Pickup and full-size SUV garage users.

Why it ranks #2: The 6,600-pound capacity and 7.1- to 20.9-inch lift range are specified for pickups, full-size SUVs, crossovers, and vans.

A 7.1- to 20.9-inch lifting range targets pickups, full-size SUVs, crossovers, and vans, giving the AUTOWN floor jack a higher starting point than a low-profile model. Its 6,600-pound capacity and cross-shape rubber pad pair lifting strength with a vehicle-contact feature for garage work.

The listed high-clearance range suits vehicles whose frames can accommodate a 7.1-inch minimum, and its 20.9-inch maximum defines the upper lift limit. Heavy-gauge alloy steel is specified for the 3-ton, 6,600-pound capacity, while the hydraulic quick-lift system supports raising during service. The cross-shape rubber pad provides a contact surface; the listing specifically advises measuring frame clearance, particularly for sedans, before choosing this jack.

Skip it if you need a jack for low-clearance vehicles; the Jack Boss 3 Ton Low Profile starts at 3-15/16 inches.

This AUTOWN suits pickup and full-size SUV owners whose vehicle clears its 7.1-inch minimum and who want a 6,600-pound floor jack. Measure frame clearance, especially for sedans.

Listed on Amazon as: AUTOWN 3 Ton Floor Jack, Alloy Steel Hydraulic Car Jack with Quick Lift & Cross-Shape Rubber Pad, 7.1-20.9 Inch Lifting Range for SUV Truck (6600 lbs)

#3 · Integrated Jack Stand

3. Powerbuilt Unijack

• Load Capacity: 6000 lb
• Material: Metallic-Fiber
• Dimensions: 9.88 x 9.75 x 11.5 in

Best for: Truck owners wanting lift and hold.

Why it ranks #3: This 3-ton unit combines a bottle jack and ratcheting safety bar, and its listed 11- to 21-inch range suits trucks and SUVs.

A built-in ratcheting safety bar lets the Powerbuilt Unijack lift and hold a vehicle in one compact unit, combining bottle jack and jack stand functions. Its 3-ton rating and 11-to-21-inch lift range are listed for pickups, SUVs, vans, and Jeeps, making it a distinct alternative to a rolling floor jack.

The integrated jack-and-stand arrangement removes the need to use a separate jack stand for the holding function, and the ratcheting bar locks the unit in its raised position. Its 11-inch minimum height makes it a fit for higher-clearance vehicles rather than low cars. The 21-inch maximum and 6,000-pound capacity suit many trucks and SUVs; the wide base adds stability, including for RV and off-road use as stated.

Skip it if you need to get beneath a low-clearance vehicle; the Jack Boss 3 Ton Low Profile starts at 3-15/16 inches.

Choose the Powerbuilt for trucks, SUVs, or unibody vehicles when one unit that lifts and holds suits your workflow. Its 11-inch starting height requires substantial vehicle clearance.

Listed on Amazon as: Powerbuilt 3 Ton, Bottle Jack and Jack Stands in One, 6000 Pound Capacity, All-in-One Car Lift, Heavy Duty Vehicle Unijack, Wide Base, 620471

#4 · Highest Capacity

4. AV Steel 4 Ton Floor Jack

• Load Capacity: 4 tons
• Material: Alloy Steel
• Dimensions: 31.69 x 14.56 x 8.07 in

Best for: Standard pickup owners needing 4 tons.

Why it ranks #4: Its 4-ton, 8,000-pound capacity and 4-1/4- to 19-3/4-inch range fit standard pickup trucks, though not lifted vehicles or heavy-duty trucks.

An 8,000-pound capacity gives the AV Steel 4-ton floor jack more stated lifting headroom than a 3-ton option for compatible pickups, vans, and SUVs. Its 4-1/4-inch minimum and 19-3/4-inch maximum define the working range, while the dual-piston pump supports quicker lifting during routine garage service.

The 4-ton rating and hydraulic construction serve owners whose standard pickup or SUV needs fall within the stated capacity. A 4-1/4-inch minimum clearance sets a practical boundary: this is not the choice for sports cars, lifted vehicles, RVs, or heavy commercial trucks, which the listing excludes. The 19-3/4-inch maximum offers useful lift height, and the dual-piston pump is intended to reduce pumping effort during a lift.

Skip it if you need a jack for lifted vehicles or RVs; the BIG RED T90413 bottle jack reaches 14-5/16 inches but has a 4-ton rating.

This AV Steel model fits owners servicing standard pickups, SUVs, or vans who want a 4-ton floor jack and dual-piston pumping. Its listed exclusions make vehicle type and clearance essential boundaries.

Listed on Amazon as: AV Steel Heavy-Duty Floor Jack 4 Ton (8,000 lbs), Lift Range 4-1/4" to 19-3/4" for Cars, Vans, SUVs & Pickup Trucks, Hydraulic Steel Floor Jack with Dual Piston Pump – Not for Sports Cars or RVs

#5 · Off-Road High Lift

5. VEVOR Farm Jack

• Load Capacity: 7000 lb
• Material: Steel
• Dimensions: 9.1 x 5.1 x 48.2 in

Best for: Off-road and farm high-lift users.

Why it ranks #5: The 7,000-pound farm jack offers a 4.13- to 40.74-inch range for trucks and off-road vehicles, with a different use case than floor jacks.

A 48-inch lifting space gives the VEVOR farm jack far more vertical reach than a conventional floor jack, for off-road vehicles, trucks, and listed farm tasks. Its 7,000-pound capacity and ratcheting height adjustment also support work involving agricultural machinery, stumps, or fence posts.

The 4.13- to 40.74-inch range makes this tool suited to high-lift work rather than low-profile garage access. Ratchet holes spaced at 20 mm allow incremental height adjustment as the jack climbs, and the wrench switch is described as enabling quick, smooth lowering. Thickened steel construction and a galvanized powder-spraying process are listed for strength and protection, while the 48-inch format calls for storage space and suitable lifting points.

Skip it if you need a compact garage jack with rolling access; the BIG RED T83006 is a 36-pound trolley floor jack for trucks and SUVs.

Choose the VEVOR for off-road or farm work that benefits from high lift and ratcheting adjustment. Its 48-inch body and farm-jack format require suitable storage and lifting points.

Listed on Amazon as: VEVOR Farm Jack 48 inch Utility High Lift, 7000 lbs Capacity Ratcheting Off Road Jeep Jack, Heavy for Tractor, Truck, SUV, Bumper Lift, Orange

#6

6. Maxority 5 Ton Floor Jack

• Load Capacity: 11000 lb
• Material: Steel

Best for: Heavy-duty workshop lifting.

Why it ranks #6: Its 11,000-pound capacity is the highest listed here and may suit heavier lifting needs, but the supplied details give no numeric lift range.

A stated 11,000-pound capacity sets the Maxority 5-ton floor jack apart for buyers handling heavier vehicles in home or workshop maintenance. Its low-profile format and dual-piston quick-lift pump combine access with faster pumping, while the listing identifies cars, trucks, and SUVs as intended vehicle types.

The 5-ton rating provides more stated capacity than a 3-ton jack, making this a candidate for heavy-duty vehicle work within its listed limit. Its low-profile design supports access beneath vehicles with reduced clearance, while the dual-piston quick-lift pump is intended to shorten lifting effort. The steel construction and 100-pound listed weight point to a substantial workshop tool rather than an easy-to-carry roadside jack.

Skip it if you need to carry a jack between locations; the BIG RED T90413 bottle jack weighs 6.2 pounds and has a 4-ton capacity.

This Maxority suits a workshop lifting heavier cars, trucks, or SUVs within 11,000 pounds. Its 100-pound weight favors a stationary work area, and vehicle clearance still needs to suit the jack.

Listed on Amazon as: Maxority 5-Ton (11000lbs) Low Profile Hydraulic Super Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Red, 5 Ton Low Profile)

#7

7. AV Steel 3 Ton Floor Jack

• Load Capacity: 6000 lb
• Material: Alloy Steel
• Dimensions: 26.4 x 14.2 x 8.3 in

Best for: Standard pickup jack for routine service.

Why it ranks #7: This steel floor jack is listed for standard pickup trucks and lifts 6,000 pounds from 5.5 to 18.5 inches, but excludes lifted trucks.

The AV Steel 3-ton floor jack is listed for standard pickup trucks, SUVs, and minivans, with a 6,000-pound capacity for common garage lifting tasks. Its 5.5-inch minimum and 18.5-inch maximum set a clear operating range, and its single-piston design distinguishes it from dual-piston alternatives.

A 6,000-pound capacity and alloy-steel construction suit the standard cars, SUVs, minivans, and pickups named in the listing. The 5.5-inch minimum height means this jack is not the listed low-clearance choice; the 18.5-inch maximum provides its upper working limit. Its single-piston pump is a straightforward configuration, while EV owners are advised to use a jack-point adapter to align with manufacturer-specified lift points.

Skip it if you lift a lifted vehicle or heavy-duty truck; the Maxority 5-Ton Low Profile offers a higher stated capacity for heavy-duty vehicles.

Pick this AV Steel jack for standard pickup or SUV maintenance within its 6,000-pound rating. Its 5.5-inch minimum and exclusions for lifted and heavy-duty vehicles are important fit boundaries.

Listed on Amazon as: AV Steel 3 Ton Floor Jack (6000 lbs), Single Piston Steel Hydraulic Floor Jack, Lift Range 5.5" to 18.5", Fits Cars, SUVs & Standard Trucks – Not for Lifted Vehicles or Heavy-Duty Trucks

#8

8. Jack Boss 3 Ton Floor Jack

• Load Capacity: 3 tons
• Material: Aluminum
• Dimensions: 23.6 x 11.8 x 6.3 in

Best for: Low-clearance SUV floor-jack users.

Why it ranks #8: The 3-ton capacity and 3-15/16- to 18-5/16-inch range suit many SUVs and trailers, but its listed fit is less truck-specific.

A 3-15/16-inch minimum height lets the Jack Boss slide beneath vehicles with limited ground clearance, while its 3-ton capacity covers many SUVs, minivans, and travel trailers. Its dual-piston quick-lift pump and aluminum-and-steel construction make it a floor-jack option for owners who need both low access and substantial lifting capacity.

The low starting height helps reach vehicles that a taller jack may not clear, and the 18-5/16-inch maximum provides lift travel for routine service. A dual-piston quick-lift pump supports faster raising, while the included two-piece handle and rubber saddle are ready-to-use components. The stated 3-ton capacity suits many standard SUVs and trucks, but the listed 58.5-pound weight is worth considering if you frequently move or store your jack.

Skip it if you need a lighter floor jack to reposition often; the 36-pound BIG RED T83006 is lighter, though its minimum height is greater.

Choose this Jack Boss for garage lifting when low vehicle clearance and a 3-ton rating matter. Its maximum lift is 18-5/16 inches, and its 58.5-pound weight makes frequent transport less convenient.

Listed on Amazon as: Jack Boss 3 Ton Low Profile, Aluminum and Steel Racing Floor Jack with Dual Pistons Quick Lift Pump, 1.5X Overload Tested for Safety, Sport Utility Vehicle, Lifting Range 3-15/16" min to 18-5/16" max

#9

9. BIG RED 4 Ton Bottle Jack

• Load Capacity: 4 Ton
• Material: Alloy Steel
• Dimensions: 4.27 x 3.43 x 7.5 in

Best for: Portable 4-ton bottle-jack users.

Why it ranks #9: Its 4-ton capacity and storage case offer a compact alternative, but the 7-1/2- to 14-5/16-inch range may limit truck clearance.

At 6.2 pounds, the BIG RED bottle jack is easy to carry relative to many floor jacks, while its 4-ton rating serves lifting jobs up to 8,000 pounds. A 7-1/2- to 14-5/16-inch range and adjustable screw top provide working height flexibility in a compact jack-and-case package.

The bottle-jack format and included storage case make this a portable option for residential or commercial use, while the wide rugged base is listed to enhance stability. Its 4-ton capacity handles loads up to 8,000 pounds, and the adjustable screw top adds versatility within the 7-1/2- to 14-5/16-inch range. Drop-forged alloy steel with reinforced stress points supports durability, but the limited maximum height constrains its reach.

Skip it if you need more than 14-5/16 inches of lift; the Powerbuilt Unijack reaches 21 inches for trucks and SUVs.

Choose this BIG RED bottle jack when portability, a storage case, and a 4-ton rating suit your lifting task. Its 14-5/16-inch maximum height is a firm reach boundary.

Listed on Amazon as: BIG RED 4 Ton (8,000 LBs) Hydraulic Welded Bottle Jack with Storage Case

#10

10. Maxority 3 Ton Floor Jack

• Load Capacity: 6600 lb
• Material: Alloy Steel

Best for: Low-clearance and modified-car owners.

Why it ranks #10: The low-profile design and dual-piston pump emphasize low-clearance vehicles; supplied details give no numerical lift range or truck-specific fit.

Extended reach paired with a low-profile design lets the Maxority 3-ton floor jack access vehicles with minimal ground clearance, including lowered vehicles and those with aftermarket modifications. Its 6,600-pound capacity and dual-piston quick-lift pump make it a floor-jack choice for owners who need low access and quicker lifting.

The low profile and extended reach are specifically presented for reaching beneath low-clearance vehicles, where access can be a central obstacle. A dual-piston quick-lift pump supports faster raising, and the 6,600-pound capacity defines the load limit for the job. The listing includes a pumping handle, while the 90-day warranty description is not a substitute for confirming that the lifting points and vehicle requirements suit the task.

Skip it if you need a longer stated warranty; the AV Steel 3 Ton Floor Jack lists a one-year warranty and suits standard, non-lifted trucks.

This Maxority is aimed at owners of lowered or modified vehicles who need low-clearance access from a floor jack. Keep its 6,600-pound limit and 90-day listed warranty in view.

Listed on Amazon as: Maxority 3-Ton (6600lbs) Low Profile Hydraulic Heavy-Duty Steel Floor Jack with Dual Pistons Quick Lift Pump, Home and Workshop Car Maintenance for Various Vehicles (Random Color, 3 Ton Low Profile)